Blog

MINIMUM CRITERIA FOR ENGINE OF INCINERATION
CAPACITY OF INCINERATION 30KG/ H

1. BASIC SPECS:

The burner for clinical waste need to be designated for the damages of all sort of waste created by the Facility for Health (waste type medical facility, center, medical lab for ruining ability of 30kg/ h).

Pyrolytic gasification combustion control shall:

? Protect against advancement of black smoke as well as also dirt development point loading of waste;
? Supply normal and complete burning of the waste;
? Provide controlled assuring the absence of color, cloud of smoke or shedding smell;
? Allow limited gas intake

The incinerator with pyrolytic combustion have to have:

a. Combustor:

– – – – Chamber solid steel assistance legs sheet;
– – – – The cellular lining is made from refractory blocks as well as likewise a thermal insulation making sure a minimum temperature of the sheet;
– – – – The sole burning is comprised of a refractory lining particularly created to satisfy the thermal, mechanical in addition to corrosive fluid waste needs and liquified glass;
– – – – The dimensions of the floor are prepared laterally primary air nozzles that sustain burning;
– – – – The fireplace is outfitted with a blending system of waste burning is regulated button;
– – – – The recovery procedure of the ashes will certainly take place daily line before starting the day’s procedure.

Framework of the refractory cellular lining:
* Insulation:
– – – – Operating temperature degree: 1000 ° C max
– – – – Nature: Calcium Silicate – – – Thickness: 80 mm * Refractory: – – – Running temperature: 1650 ° C max – – – Nature: Refractory blocks with 42 alumina – – Density: 110mm

Heater burning:

– – The burning chamber is geared up with a heater to line to make certain right temperature degree for the general damages of waste burning; – – Automatic monobloc burner and also fire dive provided with an electronic ignition system and likewise irreversible air circulation. Air follower: – – A major air and also second air follower gives the needed oxygen shipment – – There is an electrical motor ran shutoff that regulates the blood circulation according to the combustion. – – The stress and anxiety of the fan is 500 mm CE to pierce the mass of – waste throughout burning.

b. Article – – burning chamber:

– Manage the gas has a marginal temperature degree of 1100 ° C with a minimal residence time of 2 secs the afterburner is to; – – An additional air injection is expected in addition to offers best oxygen material; – – The heater ensures a minimum temperature of 1100 ° C continuous; – – The design of this heating system looks like shedding burners; – – The afterburner is – outfitted with accessibility doors in order to ensure typical cleansing– – of dust; – The afterburner is lined with high thermal insulation with a density of 150 mm

c. Closet, control and likewise guideline: – – The entire installation will certainly adapt European criteria( EU ). – – The electrical power is 220V 50Hz singular phase. – – Regulatory authorities of temperature with digital display screen:.
––? 1 to take care of the temperature level of the burning chamber.? 1 for regulating the temperature level of the afterburner.
? The hands-on controls are supplied on each thing.

2. PRODUCT DIMENSIONS

Recap Dimensions. Gas diesel oil.
Amount of combustion

chamber Burning: 0.3 m3.
‘ TEMPERATURE LEVEL LEVELS:. Burning. Afterburner

0.11 KW.
0.11 KW0

Follower power 0.37 kW

i- burners:

use diesel , natural gas , liquefied petroleum gases according to standards burners should have main vent to be used

for protection.

2- materials:

-the chamber should be covered from inside with refractory brick with thickness 22 cm aluminum silicate insulation 11cm

thickness with the ability to change this layer .

– All surfaces made of carbon steel should be surface treated and covered with primary layer. That holds the working

condition and easy to clean it is recommended that materials are chosen according to standard codes.

Chimney exhaust gas filtration:

To meet the European standard 2000/76/EC

Chimney height should not be less than 12 meter and radius 8 cm.

 

– Treat the gas has a minimum temperature of 1100 ° C with a minimum residence time of two seconds the afterburner is

to;

– A secondary air injection is expected and provides perfect oxygen content;

– The burner ensures a minimum temperature of 1100 ° C continuous;

– The design of this burner is similar to combustion burners;

– The afterburner is equipped with access doors in order to ensure regular cleaning of dust;

– The afterburner is lined with high thermal insulation with a thickness of 150 mm

 

1. Cabinet, control and regulation:

– The entire installation will conform to European standards (EU)

– The electrical power is 220V 50Hz single phase.

– Regulators of temperature with digital display:

? 1 to regulate the temperature of the combustion chamber

? 1 for controlling the temperature of the afterburner

? The manual controls are provided on each item.

1. Should have preparation, Incineration, Scrubber steps to burn waste completely and waste gas should be non-

polluted

 

2. Heavy duty steel, heat resistant coating, stainless steel lid, painted tubular steel frame, 2-blowers, axial

vane, suitable drum (S/S, thick) for the incinerator must be provided.

 

3. Approx. 20 to 25 Kg per batch and the time required for 1 batch not more than 1 hour on average.