Blog

Small Medical Waste Incineraotr for COVID-19 Bio Hazardous Medical Waste


HICLOVER – Medical Environmental 

Model

YD-20

Photo

Burning Rate

Typical 20 kgs/hour

Feed Capability

Ordinary 60 kgs/feeding

Main Burning Chamber

360 Litres

Secondary Burning Chamber

200 Liters

Mix Combustion Chamber

Yes

Smoke Filter Chamber

Yes

Feed Setting

Guidebook

Voltage

220V

Power

1.0 Kw

Gas Type

Diesel Oil/ Natural Gas/LPG

Burner

Italy Original

Oil Intake (Diesel Oil)

Standard 13.3 kg/hour

Gas Usage (Gas)

***

Inner Dimensions

100 x 60 x 60cm (key chamber)

Outside Dimensions

145 x 90 x 260cm (without smokeshaft)

Temperature Level Screen

Yes

Oil Storage Tank Capability( if oil gas)

200 Litres

Door Opening

48 x 60cm

Chimney Length

5.0 Meters

Smokeshaft Kind

Stainless-steel

Equipment Gross Weight

2300 kgs

Operation Technical Specs

Primary Chamber Temperature

800 ℃–– -1000 ℃

Second Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Burning Efficiency

> 98%

Waste Lower Calorific Power

3000Kcal

Wearing a face mask to keep out the coronavirus has become an essential part of everyday life for many people 
around the world, but the huge amount of waste being created as the single-use items are tossed aside has the 
potential to become an ecological disaster.

How to deal with discarded face masks, which number in their millions or even billions, is another headache for 
Chinese authorities already caught between containing the viral disease and limiting the economic damage caused by it.

The country’s inadequate medical waste treatment capabilities have also been put under the spotlight, environmental experts said.

Environment and health authorities say masks and other protective gear, especially items used by medical personnel and 
people infected with the coronavirus, should be treated as clinical waste, and sterilised before being incinerated at high 
temperatures at dedicated facilities.

While it is difficult to get an exact figure on the number of discarded masks, it is reported that the volume of medical 
waste in Wuhan, the city in which the epidemic began in December, had quadrupled to more than 200 tonnes a day last 
week, according to mainland Chinese media reports.

The total amount of medical waste gathered across Hubei province on February 24 totalled 365 tonnes, of which 60 per 
cent came from hospitals, the report said.

By comparison, Wuhan produced 17,000 tonnes of medical waste in the whole of 2018, according to the country’s top 
environment watchdog.

Eric Liu, a toxic waste specialist at Greenpeace’s Beijing office, said China had a huge shortage of waste disposal facilities, 
specifically those capable of handling clinical waste.

“The waste treatment capacity in China, especially in terms of medical and hazardous waste, is barely enough to cope 
with everyday needs, let alone the country’s biggest public health crisis in decades,” he said.

While the environment ministry said most medical waste was being properly dealt with in major cities, just 31 per cent 
of the country’s 629,000 tonnes of medical waste were treated in 2015, up from 24 per cent in 2008, Xinhua reported 
last year, citing an industry study.

Du Huanzheng, director of the Recycling Economy Institute at Tongji University in Shanghai, also expressed concerns 
over the widening supply-demand gap in medical waste treatment, but said a large number of new facilities were being built or planned.

“The disposal of medical waste is a major part of the battle against the outbreak, which is a wake-up call for the government 
to speed up the construction of new facilities and research into waste treatment technologies,” he said.

The coronavirus outbreak could be the catalyst for expanding the medical waste sector and lead to the building 
of more incineration facilities, the experts said.

They said combustion remained the preferred means for disposing of medical waste in China, although industrialised 
countries were phasing out incinerators due to health and environmental concerns.

Masks could be split into three categories, Liu said. While clinical waste must be disposed of at dedicated incineration
 facilities, masks used by healthy people could be tackled in a similar way as household waste, which was burnt in industrial furnaces, he said.

The real challenge came from those used by people who were placed under home quarantine or others with mild symptoms, he said.

“There is a grey area over this kind of used mask, which are not under the jurisdiction of medical institutions but should 
be treated in accordance with standards for medical waste.”

In Wuhan, authorities are scrambling to find solutions to the challenge. The environment ministry said the city’s five incinerators 
for household waste disposal and various industrial furnaces at cement and other factories had also been assigned to help clear 
the garbage backlog, which stood at about 190 tonnes as of February 24.

According to a report by China Economic Daily, Wuhan is rushing to build more medical waste treatment plants near hospitals, 
including ones near Huoshenshan, Leishenshan and Jinyintan hospitals that will treat nine, 15 and four tonnes of clinical garbage respectively on a daily basis.

A total of 17 temporary storage facilities for medical waste, with a combined capacity of more than 1,000 tonnes, have also been built.

While authorities had to transfer some of the garbage produced in Wuhan to neighbouring cities for incineration, they have also 
tried to enlist help from waste treatment companies around the country.

China Shipping Group and a company in Anhui deployed a number of mobile medical waste incineration cabins to Wuhan last month, Xinhua reported.

The incinerators, each of which is capable of processing five tonnes of waste a day, were first used in 2003 during the Sars outbreak.


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-24


Incinérateurs de déchets médicaux de 30 kg pour les déchets COVID19



Q: quel type de déchet peut-on utiliser dans cet équipement?

R: Cet équipement pour les déchets médicaux, les animaux de compagnie, les déchets municipaux, les déchets vivants. Interdire toute matière explosive et radiante, déchets liquides et gazeux.

Articles / modèle

TS30 (API)

Taux de brûlure

30 kg / heure en moyenne

Capacité d’alimentation

60 kg en moyenne par repas

Mode de contrôle

PLC (Incinérateur à contrôleur logique programmable)

Chambre de combustion

330 L

Dimensions internes

75x75x60cm

Chambre secondaire

180 L

Chambre de filtre à fumée

Oui

Mode d’alimentation

Alimentation manuelle

Tension

220V

Pouvoir

0,5 Kw

Consommation d’huile (kg / heure)

Moyen 13,3

Consommation de gaz (NG, m3n / heure)

Moyenne 16

Consommation de gaz (GPL, m3n / heure)

Moyen 11,7

Moniteur de température

Quatre affichage numérique

Protection de la température

Oui

Cuve à mazout

2 00L  

Porte d’alimentation

55 x 50 cm

Cheminée

5 mètres  

Type de cheminée

Acier inoxydable

1er. Température de la chambre

800 ℃ –1000 ℃

2ème. Température de la chambre

1000 ℃ -1200 ℃

Temps de résidence

2,0 sec.

Poids brut

3 000kg

Dimensions extérieures

175x120x140cm


HICLOVER – Environnement médical, WWW.HICLOVER.COM, Incinérateurs de déchets,
Incinérateur de déchets médicaux , crémation d’animaux de compagnie, déchets solides   Incinérateurs

Solution HICLOVER pour lutter contre le COVID-19, incinérateur de déchets médicaux (incinérateur mobile en conteneur)
Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.



06/07/2020

Утеплитель YD-100 для Ирака

В период с 2013 по 2014 год в Ирак поступает 03 комплекта Design YD-100. Нагреватель, использующийся для соседства с рядом строений, а также на строительных площадках, в дополнение ко всем видам газа – это дизельное топливо.

Предметы / Модель Ярд-100
Скорость горения (кг / час) 100 кг / час.
Емкость подачи (кг) 200 кг
Вес оборудования 5300 кг
Первичная камера (литры) 1200
Вторичная камера (литры) 500
Внешние размеры (см) 220x180x360
Внутренние размеры (см) 130x100x90
Масляный бак (литры) 300
Дверной проем (см) 55 х 80
Дымоход (M) 10
Тип дымохода Нержавеющая сталь
Вторичная камера ДА
Камера смешанного сгорания ДА
Камера дымового фильтра ДА
Горючее топливо Нефтяной газ
Время проживания 2.0 сек.
Контроль температуры ДА
1-й. Chmaber Температура 800 ℃ –1000 ℃
2-й. Chmaber Температура 1000 ℃ -1200 ℃
Медицинская экология  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

small scale medical waste incinerator

Toxic and dangerous wastes,
Medical pharmaceutical and hospitable liquids  Wastes
Domestic garbage
Electric and electronic wastes
Industrial wastes
In General, all type of wastes and garbages
Capacity 50-60Kg/h

Combustion supporting materials
Coal oil, diesel oil

Temperature inside
800-10000C

1000-12000C

Burning efficiency
>98%

Power consumption
1.3KW

Noise
<78dB

Index of let smoke and waste gas
Ringelman’s smoke index< level 1

Smoke concentration
Oil
45.5

(mg/m3)
Gas
25.5

(mg/m3)

SO
Oil
0.176
Gas
0.065

NOX
Oil
0.031
Gas
0.038

H2S
Oil
0.016
Gas
0.008

CO
Oil
8.32
Gas
35.64

small scale medical waste incinerator Requirements
Incombustible and explosive materials not allowed in

Process manner
Two combustion cabinets (wetness drying, high temperature dust removal)

Combustion / Burner
Good Quality made in Italy

Blower
Good Quality made in China

Control Electrical
Good Quality made in China

Capacity 50 Kg/h

Working Voltage
220 V

Power
1000 W

Applied For
200 beds

Input Fashion
Manual

Medical Incinerator, 24 kg/hr
Medical Incinerator, 24 kg/hr including panel board, controls and accessories
Furnace gate
Chimney
Blower
Combustion burner

Medical Incinerator, 12 kg/hr
Medical Incinerator, 12 kg/hr including panel board, controls and accessories
Furnace gate
Chimney
Blower
Combustion burner

Medical Incinerator, 6 kg/hr
Medical Incinerator, 6 kg/hr including panel board, controls and accessories
Furnace gate
Chimney
Blower
Combustion burner

Procedure Fire Brick Installation at Incinerator Oil and Gas

Basic Info.

Model NO.:price of burner incinerator
Export Markets:Global

Product Description

Technology Respond(FAQ) 

Q: What’s kind of waste may utilize in this gear?  A: This gear for medical waste, pet animal, Municipal waste, live waste. Prohibit any explosive and radiation material, liquid waste and gas waste. 

Q: Incinerator Smoke Standard  A: China Government Standard: No. GB18484-2001.  The animal/pet combustion rate around 2/3 of average power. 

Clover incinerator utilize time daily to 24 hours. Between each feed/combustion time, there are about 0.5-1 hours cooling time plus time to get feeding waste. Actual combustion time daily is around 16 hours. The life of incinerator involving 5-10 year based on utilize. 

Ordinarily, we proposition small laboratory, small clinic use capacity under 20 kgs per hour. When incinerator use in hospital, then please compute the waste output around 2kgs per people every day. If there are 200 sickbed in the hospital, that’s mean you need one incinerator capacity around 400kgs every day, change to power per hour is around 30-40 kgs per hour. Incinerator medical for clinic, incinerator medical waste, incinerator news, incinerator of china manufature, incinerator pharma manufacturer waste, incinerator mobile suppliers from china, According the performance time every day, waste material, budget, development, etc, you may use potential from 30-50 kgs per hour incinerator.  *The best way to compute Animal Cremation Burn Rate: 2/3 of the medical waste. 

Q: Testing and Assembly A: We provide all records and incinerators simple to setup and functionality. Client can send people come to our factory to find out installation and operation. Generally, we don’t send engineer to neighborhood site or even request. The dispatch price is extra based on order. 

Q: Combustion Temperature  A: The very first combustion chamber: 800-1000 centi level.  The next combustion chamber: 1000-1200 centi level.  PLC mode based on order and model. 

Q: Operation and maintenance costs  A: Operation price based on fuel consumption rate and power/staff, etc. 

Annual around $500-$1000USD per year maintenance according model, utilize situation. 

One individual can service 02 device incinerators. The team should have fundamental electrician knowledge to operate/inspect/maintaince incinerator/burner/blower based on performance user guider, and understand threat of medical waste to protect worker self with essential protection element. 

One person can service 02 unit incinerators. The staff should have basic electrician knowledge to operate/inspect/maintaince incinerator/burner/blower according to operation user guider, and know risk of medical waste to protect worker self with necessary protection element. 

Q: The Residency time in secondary combustion chamber 
A: 02 sec.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Containerized Mobile Burner Medical Waste Incinerator Model CA50


HICLOVER – Containerized Mobile Incinerator Medical Waste Incinerator Model CA50


Design

CA50

Picture

Waste Therapy

Medical Waste Incineration Treatment

Feed Capacity

Typical 100 kgs per feeding

Burning Rate

Average 50 kgs per hr

Burning Time per Feed

Average 2 hr

Control Setting

PLC( Programmable Logic Controller Burner)

Voltage

220V

Power

1.0 Kw

Gas

Diesel oil

Burner

Italy Burner

Feed Mode

Guidebook

Temperature Monitor

Digital Display

Gas usage (Oil)

Ordinary 16.9 Kgs/Hour

Inner Measurements

100x80x70cm (Key Chamber)

External Dimensions

230 x 130 x 155cm (text)

Waste combustion chamber

560Liters

Message Combustion Chamber

280Liters

Oil Tank Capacity

200 Litres

Door Opening

70 x 50cm

Chimney

5.0 M

Gross Weight

4500kgs

Chamber Product

Firebrick, Refractory Concrete

Max. Warmth Value

166,000 Kcal/Hr.

Procedure Technical Specifications

Solid Chamber temperature

8000C -10000 C

Gas Chamber temperature level

10000C -12000 C

Chamber Anti-Rate

17500C

Residency time

2.0 Sec.

Burning efficiency

> 98%

Waste Lower Calorific Power

3000Kcal


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-24


Incinerador médico 10 kg / hora

Descripción del producto

Respuesta tecnológica (preguntas frecuentes)

P: ¿Qué tipo de residuos se pueden utilizar en este equipo?
R: Este equipo para desechos médicos, animales de compañía, desechos municipales, desechos vivos. Prohibir cualquier material explosivo y radiactivo, desechos líquidos y desechos gaseosos.

Q: Estándar de humo del incinerador
A: Estándar del gobierno de China: No. GB18484-2001.

Q: capacidad de tratamiento
A: Capacidad media calculada por residuo médico (menor poder calorífico (LC P): 3.0TH Kcal / Kg por hora), no significa ningún material de desecho. La tasa de combustión animal / mascota es de alrededor de 2/3 de la capacidad promedio.

Tiempo de uso del incinerador de trébol por día hasta 24 horas. Entre cada tiempo de alimentación / combustión, hay alrededor de 0,5 a 1 horas de tiempo de enfriamiento y tiempo para alimentar los desechos. El tiempo real de combustión por día es de alrededor de 16 horas. La vida útil del incinerador es de 5 a 10 años según el uso.

Generalmente, proponemos laboratorios pequeños, capacidad de uso de clínicas pequeñas por debajo de 20 kg por hora. Cuando se usa el incinerador en el hospital, calcule la capacidad de producción de desechos en alrededor de 2 kg por persona por día. Si hay 200 lechos de enfermo en el hospital, eso significa que necesita una capacidad de incinerador de alrededor de 400 kg por día, el cambio a la capacidad por hora es de alrededor de 30-40 kg por hora. Incinerador de 300 kg, quemadores de cremación de animales, incineradores de animales de China, incinerador de desechos médicos de China, China + incinerador, fabricante de incineradores de hospitales, según el tiempo de operación por día, material de desecho, presupuesto, desarrollo, etc., puede usar una capacidad de 30-50 kg. por hora incinerador.
* Cómo calcular la tasa de quemaduras por cremación de animales: 2/3 de los desechos médicos.

Q: Montaje y prueba
R: Suministramos todos los documentos e incineradores de fácil instalación y funcionamiento. El cliente puede enviar personas a nuestra fábrica para aprender a instalar y operar. Generalmente, no enviamos al ingeniero al sitio local si no lo solicitamos. El costo de envío es adicional según pedido.

Q: temperatura de combustión
R: La primera cámara de combustión: 800-1000 grados centígrados.
La segunda cámara de combustión: 1000-1200 grados centígrados.

Q: Modo de control del incinerador
R: El modo de control predeterminado es un caso de control común. Modo PLC según modelo y pedido.

P: Costos de operación y mantenimiento
A: Costo de operación según tasa de consumo de combustible y energía / personal, etc.

Anual alrededor de $ 500- $ 1000 USD por año de mantenimiento según modelo, situación de uso.

Una persona puede dar servicio a 02 incineradores unitarios. El personal debe tener conocimientos básicos de electricista para operar / inspeccionar / mantener el incinerador / quemador / soplador de acuerdo con la guía del usuario de operación, y conocer el riesgo de desechos médicos para proteger al trabajador con el elemento de protección necesario.

P: El tiempo de residencia en la cámara de combustión secundaria.
A: 02 seg.

Artículos / Modelo TS10 (PLC) TS20 (PLC) TS30 (PLC) TS50 (PLC) TS100 (PLC)
Velocidad de combustión 10 kg / hora 20 kg / hora 30 kg / hora 50 kg / hora 100 kg / hora
Capacidad de alimentación 20 kg 40 kg 60kg 100 kg 200 kilogramos
Modo de control SOCIEDAD ANÓNIMA SOCIEDAD ANÓNIMA SOCIEDAD ANÓNIMA SOCIEDAD ANÓNIMA SOCIEDAD ANÓNIMA
Cámara de combustión 100L 210L 330L 560L 1200L
Dimensiones internas Los 50x50x40cm Los 65x65x50cm Los 75x75x60cm El 100x80x70cm El 120x100x100cm
Cámara secundaria 50L 110L 180L 280L 600L
Cámara de filtro de humo sí sí sí sí sí
Modo de alimentación Manual Manual Manual Manual Manual
Voltaje 220 V 220 V 220 V 220 V 220 V
Energía 0,5 Kw 0,5 Kw 0,5 Kw 0,7 kilovatios 0,7 kilovatios
Consumo de aceite (kg / hora) 5,4-12,6 7,8–16,3 10.2-20 12.1-24 14-28
Consumo de gas (m3 / hora) 6.2-11.4 8-15,7 9,8-20 9,9-26,1 10–32,2
Monitor de temperatura sí sí sí sí sí
Protección de temperatura sí sí sí sí sí
Tanque de aceite 100L 100L 100L 100L 200L
Puerta de alimentación Los 30x30cm Los 45x40cm Los 55x50cm Los 70x55cm Los 80x60cm
Chimenea 3 metros 3 metros 5 metros 5 metros 10 metros
Tipo de chimenea Acero inoxidable Acero inoxidable Acero inoxidable Acero inoxidable Acero inoxidable
Tiempo de residencia 2,0 seg. 2,0 seg. 2,0 seg. 2,0 seg. 2,0 seg.
Peso bruto 1500 kg 2200 kg 3000 kg 4500kg 6000 kg
Dimensiones externas El 140x90x120cm El 160x110x130cm El 175x120x140cm Los 230x130x155cm Los 260x150x180cm

Incinérateur de type conteneurisé pré-assemblé

Incinérateur pré-assemblé de type conteneurisé

Modèle

CA100

Photo

Traitement des déchets

Traitement d’incinération des déchets médicaux

Capacité d’alimentation

100-200 kg en moyenne par aliment

Taux de combustion

100-120 kg en moyenne par heure

Durée de combustion par alimentation

1 à 2 heures en moyenne

Mode de contrôle

PLC (Incinérateur à contrôleur logique programmable)

Tension

220V

Pouvoir

1.0Kw

Le carburant

Diesel

Brûleur

Italie Brûleur

Mode d’alimentation

Manuel

Moniteur de température

Affichage numérique

Consommation de carburant (huile)

Moyenne 20,4 kg / heure

Dimensions internes

100 x 80 x 70 cm (Chambre de combustion primaire)

Dimensions extérieures

230 x 130 x 155 cm (corps principal)

Chambre de combustion des déchets

560 litres

Chambre de post-combustion

280 litres

Capacité du réservoir d’huile

200 litres

Ouverture de porte

70 x 50 cm

Cheminée

5,0 M

Poids brut

4500kgs

Matériel de chambre

Brique réfractaire, béton réfractaire

Max. Valeur calorifique

166 000 Kcal / heure.

Spécifications techniques de fonctionnement

Température de la chambre solide

800 0 C -1000 0 C

Température de la chambre à gaz

1000 0 C -1200 0 C

Chambre anti-taux

1750 0 C

Temps de résidence

2,0 sec.

Efficacité de combustion

> 98%

Déchets de puissance calorifique inférieure

3000Kcal

Le type pré-assemblé et conteneurisé ne comprend pas l’installation de cheminée, le type mobile conteneurisé.
Vitesse de combustion: 100-120 kg / heure
Température de fonctionnement minimum: 800-1000 degrés
(Combustion primaire)
Température de fonctionnement maximale: 1000-1200 degrés (chambre de post-combustion)
Capacité de combustion secondaire: obligatoire.
Isolation de densité: 50 mm de haut
Coulée réfractaire: minimum 114 mm
Doublure réfractaire robuste pour résister à 1750 degrés
Durée de combustion moyenne: 1 à 2 heures maximum
Type de carburant: mazout (diesel)
Consommation de carburant en L / h: 20,4 litres / h en moyenne.
Temps de résidence en chambre secondaire: 2 s.
Poteau de cendres résiduelles 100kg Max 3,8 kg
Période d’installation Maximum 7 jours.
État: Sites Anambra:
Hôpital général Onitsha
Hôpital général Enugwu Ukwu
Hôpital général Ekwulobia
Hôpital général d’Orumba
II. État: Sites Benue:
Site de collecte des déchets de la zone sénatoriale du Nord-Est (zone A): Bureau du PEV Katsina-Ala LGA
Site de collecte des déchets zonaux du Nord-Ouest (zone B): Bureau du PEV Gboko LGA
Site de collecte des déchets de la zone Benue Sud (zone C): Bureau du PEV Otukpo LGA
Capitale de l’État de Benue: Central Medical Store, Makurdi
III. État: Sites Kogi:
Hôpital universitaire, Anyigba, Dekina LGA
Hôpital général Obangede, Okehi LGA
Hôpital général Mopa-Muro LGA
IV. État: Sites Ebonyi:
Hôpital général Ezzango, Ebonyi North Zone
Hôpital général Onueke, zone centrale d’Ebonyi
Externe L = 3235, W = 1150, 1950/3825, Interne L = 1600, W = 675, H = 700; Volume de la chambre (m3) = 0,76; Poids (tonne environ) = 3,6, capacité de charge max (kg) 300, Taux de combustion nominal uk (kg / h) = <50, capacité thermique (kw) = 390, alimentation 50 / 60Hz = 220-250v, ouverture de porte = 67 × 550; Principe de la terre chaude = double passage, type de carburant Diesel; Panneau de commande = Al, panneau isolant super laine 25 mm, brique réfractaire isolante = grade E23, brique réfractaire (alumine) = 42,5%
incinérateur capable d’une charge allant jusqu’à 50 kg / h.
Chambre double et devrait être alimentée au carburant diesel avec régulateur de température automatique jusqu’à 900 ° Celsius.
incinérateur (2 équipements) 500kg / h pour masques jetables.
Incinérateur automatique sans fumée d’une capacité de 150 à 200 kg / h pour l’industrie. La poubelle se compose des types suivants: –
je. Déchets humides.
ii. Emballages en plastique,
iii. Déchets solides (bois, papiers, boîte de dessin animé et autres).
V. État: Sites Imo:
Centre de santé de Nwabosi, colonie de Nwabosi Isiekenesi, quartier 2, LGA Ideato Sud
Centre de santé complet, quartier Umuezeala Owerre, Ehime Mbano LGA
Centre de santé Nnenasa, colonie d’Umugba, quartier Umueze Njaba LGA
Hôpital général Owerri Umuguma, quartier 1 de New Owerri
VI. État: Sites Oyo:
Chambre froide de l’État de Jéricho, sud-ouest de la LGA, Ibadan
Secrétariat du gouvernement local d’Oyo Est, LGA d’Oyo Est
Centre de soins de santé primaires (SSP) Adebayo Alata, Ogbomosho Sud LGA
Bureau d’Itesiwaju NPI, Out Itesiwaju LGA
Bureau de Saki West NPI, Saki West LGA
Bureau central NPI d’Ibarapa, LGA centrale d’Ibarapa
VII. État: Sites de Kwara:
Ifelodun LGA
Ilorin West LGA
VIII. État: Sites Enugu:
Hôpital du district de Nsukka, ville de Nsukka, LGA de Nsukka
Hôpital du district d’Agbani, ville d’Agbani, LGA ouest de Nkanu
Hôpital du district d’Udi, ville d’Udi, Udi LGA
IX. État: Enugu MSites:
Odukpani LGA
Obubra LGA
Boki LGA

HICLOVER – Environnement médical  

Incinérateurs de déchets
Incinérateur de déchets médicaux
Crémation d’animaux de compagnie
Déchets solides   Incinérateur

Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.

30/06/2020

бытовой мусоросжигательный завод

Документы, которые необходимо предоставить:

  • Аккредитация производителей
  • Отчет об испытаниях, подтверждающий НУЛЕВОЙ уровень вредных выбросов, предоставленный в виде образцов из других установок
  • Отчет об испытаниях, подтверждающий достижение стерильности на уровнях от 6log до 10, должен быть предоставлен при вводе в эксплуатацию и валидации.

Техническое предложение включает:

  • Больница должна предоставить необходимое пространство: здание и инфраструктуру, достаточное количество пара и

подключение к помещению водопровода и канализации к помещению

  • Подготовка помещения: подготовка, ремонт и переделка помещения – ответственность поставщика.
  • Поставщик должен предоставить необходимый чертеж с указанием требований к пространству (размер комнаты (ДхШхВ)

процессоры и вспомогательное оборудование

  • Поставщик должен предоставить предложение об общей потребляемой мощности всего блока и о том, что больница будет

обеспечить электропитание. Однако за соединения внутри помещения ответственность несет поставщик.

  • Соединения / фитинги от процессора и вспомогательного оборудования к водопроводу и канализации предоставляются поставщиками.

обязанность.

  • Подробное предложение по обучению, включая продолжительность обучения персонала работе с процессором и его техническому обслуживанию.
  • Подробный график технического обслуживания.
  • Перечень запасных частей и принадлежностей, необходимых для обслуживания системы

Гарантия и послепродажное обслуживание:

  • Гарантийный срок составляет минимум 3 года или в соответствии с предложением производителя, которое наступит позже.
  • Гарантийный срок отсчитывается с момента передачи станка пользователю в рабочем состоянии.

состояние т.е. дата комиссии.

  • В гарантийный период поставщик должен предоставить все услуги по техническому обслуживанию и ремонту.
  • Время выхода из строя в гарантийный период не засчитывается.
  • Поставщик должен обеспечить резервное обслуживание не менее 10 лет (включая гарантийный период).
  • Ремонт / техническое обслуживание следует проводить в течение 72 часов после получения запроса от пользователя.

Стандарт качества: вместе с предложением должен быть предоставлен сертификат CE / FDA на предлагаемый товар.

  • Для проверки сертификата претендент должен предоставить следующее:
  1. i) Почтовый адрес эмитента сертификата.
  2. ii) Веб-сайт, адрес электронной почты, факс и номер телефона эмитента.
  • Ставка не будет принята, если:
  1. i) Эмитент сертификата недоступен
  2. ii) Эмитент не может аутентифицировать сертификат в течение срока действия заявки.

iii) Эмитент подтверждает, что представленный сертификат является дефектным с точки зрения подлинности или действительности.

Medical Waste Burner for Coronavirus Condition


Coronavirus Disease 2019 (COVID-19) pandemic continues all over the world, clinics,hospitals,goverment may need to consider on-site disposal for the infectious 

medical waste. The medical waste incinerators that has been effectively used to dispose of hazardous waste during 

viral outbreaks like Ebola. HICLOVER.COM reaches temperatures of up to 1200oC and is able to destroy health care waste 

for laboratories, small clinics, and hospitals treating patients of the Novel Coronavirus (COVID-19) such as linens, sharps, gauze, gowns, etc.