Blog

medical was incinerators Department of Wellness


university hospital waste administration group at a tertiary care health center,1250 beeded hsopital.

our everyday waste developed from all sources is 0.55 kg/bed/day =685kg/day

we require an incinerator of 150kg/hour filling up capacity.

plz reply with, acquiring, installment, running along with upkeep cost.incinerators, particularly, clinical was heaters
The specification of the Heater is as detailed below:

Needs of Heater

1. Need to have prep work, Incineration, Scrubber actions to thaw waste totally as well as likewise waste gas need to be non-polluted

2. Ash must be just 5% of the waste material

5.

our day-to-day waste created from all resources is 0.55 kg/bed/day =685kg/day

we need a burner of 150kg/hour filling up ability. The specification of the Heater is as listed below:

Requirements of Burner

1. Should have preparation, Incineration, Scrubber actions to thaw waste completely and additionally waste gas require to be non-polluted

2.

9. 1 year service warranty

10. ISO Licensed

11. Mobile Burner

12. Electric


Hiclover waste burner


Key Features:

— — — — Complete selection burner with Saved money Tiny Scale burner, Standard Small-Large Range heater,

General Municipal Solid Waste Heater, Family members Pet dog and likewise Pet Cremation, Containerized Mobile Burner,

High Effective Environmental Waste Burner.

— Single combustion chamber, double combustion chambers, three combustion chambers and 

multi-combustion chambers waste incinerators.

— System solutions for medical waste environmental.

— High burn rate, from 5kgs to 1000kgs per hour.

— New Design for pet animal cremation business.

— HICLOVER, trusted partner with years of experience.

HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental 

protection, animal and pet cremation engineering, other municipal solid waste incineration project.

We provide singular combustion chamber, double burning chambers, 3 melting chambers and also

multi-combustion chambers waste heaters for laboratory, facility, health center, clinical facility, wellness

scientific waste destruction with clinical non reusable, organic waste, clinical plastic waste, contaminated materials,

red bag waste, needle disposal, gauze and also plasters, sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, and so forth.

Our range of incinerators offer small to huge array pet dog cremation connected organizations, such as chicken cattle ranches,

ranches, lamb ranches, pig farms, stables, kennels, testing laboratory, catteries, animal crematoriums.

The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber 

again to make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection.

System solutions for medical waste environmental, including waste incineration, smoke emission treatment, 

high-temperature sterilization, ultraviolet sterilization lamp, waste shredder, needle destroyer, medical waste 

package, sharp containers, etc.

The pet cremation equipment humanized design with movable platform, small space covers for modern pet 

cremation business owner all over the world.

The containerized mobile incinerator mounted in ISO container before leave factory, pre-installation, no 

incineration house build construction, movable by truck and ultraviolet lamp sterilization inside.

HICLOVER is growing brand for environmental protection field, and market share with most of Africa, 

Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner 

for governmental organizations, non-profit organizations, international contractors, logistics organizations, 

military, pet cremation business owners, etc. We have export experience more than 40 countries, including 

war zone like Iraq, Afghanistan, Somalia, South Sudan.

We are china heater maker, professional in addition to merchant. Maker clear up expense for

incinerator consumer, supply medical heater, clinical center heater, animal incinerators, hog burners,

household pet dog cremation gadgets, tiny heater, family pet burner, animal incinerator, portable burner, little

pet incinerator, infectious waste pyrolysis tools, lab incinerator. HICLOVER aid client

reduce purchase budget, tailor-made made function, top-notch items and also pleasant remedy.

HICLOVER – Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-02-12


incinérer les déchets présentant un risque biologique

un incinérateur capable de brûler entre 3 et 5 tonnes par jour de déchets mixtes, plastiques, caoutchouc, déchets putrescibles inflammables, déchets médicaux, pneus en caoutchouc, papier et carton, textiles, déchets de bois verts, etc. contiendra des matières solides ininflammables, l’incinérateur doit être capable d’extraire ces matières probablement via un procédé de four rotatif. Nous sommes cependant ouverts aux suggestions sur la question de la solution du four rotatif car vous pouvez avoir d’autres solutions disponibles.

Il n’est pas prévu d’utiliser un carburant, tel que l’huile ou le diesel, pour favoriser la combustion des déchets, car les déchets doivent être incinérés en utilisant un processus de combustion libre. Cependant, de l’air chaud provenant d’un processus en aval sera disponible pour augmenter la température de l’incinérateur et la vitesse de combustion selon les besoins. Des températures très élevées dans l’incinérateur ne sont pas nécessaires et ne sont pas requises.

La combustion des déchets devrait produire des émissions toxiques qui seront nettoyées via d’autres processus en aval existants et un processus de post-combustion dans l’incinérateur n’est donc pas nécessaire.

L’incinérateur doit être capable d’accueillir un processus d’alimentation automatique des déchets. Nous recherchons un incinérateur pour incinérer les déchets biodangereux de notre laboratoire de microbiologie. Notre production quotidienne de déchets est jusqu’à 20 kg maximum et un incinérateur sera nécessaire sur une base hebdomadaire, soit 1 ou 2 fois par semaine, vous êtes donc prié de bien vouloir suggérer l’incinérateur approprié pour notre laboratoire qui sera rentable pour nous en ce qui concerne les achats et la maintenance. Coût.

производитель мусоросжигателей для домашних животных

Технические требования к навесному устройству, поставщику мусоросжигательного завода
1. 2 системы необходимо установить на юге Королевства Саудовская Аравия. Обе системы будут использоваться специализированными учреждениями для плавления различных видов лекарств. Все необходимые гаджеты должны быть предоставлены.
2. Гарантия: на стендовые системы должна быть поставлена трехлетняя сервисная гарантия со дня утверждения. Все требовало дополнительных компонентов, профилактических ремонтных работ, а также корректировки требований по содержанию, которые должны учитываться в цене, а также поставляться клиенту.
3. Необходимо предоставить все необходимое электричество в дополнение к водным каналам.
4. Обе системы должны быть высшего качества и экологичны.
5. Производительность каждой системы должна быть до 100 кг / час.
6. Система должна иметь собственно автоматическое кормление.
7. Каждая система должна включать в себя две зоны плавления, одну основную зону для плавления лекарства и, кроме того, еще одну комнату для плавления газов, которые выделяются в результате сильного горения.
8. Духовка должна быть изготовлена из коррозионностойкой стали плотностью не менее 6 мм.
9. Каждая система должна иметь высокий уровень защиты от различных видов лекарств, а также должна иметь эффективность 99,9% для плавления натуральных продуктов.
10. Объем отходов не должен превышать 5%.
11. Система должна иметь автоматизированную систему зажигания.
12. Система требует использования дизельного топлива (HSD) в качестве газа и не должна потреблять более 8-10 л / час.
13. Каждая система должна быть снабжена измерительным баком для хранения топлива, подходящим для работы системы в течение одного дня.
14. Уровень температуры в первичной зоне должен составлять 850 C ± 50 C. Система должна быть дополнительно аттестована для работы до 1050 C ± 50 C. Система должна продолжать процедуру в дополнение к необходимости подачи бетона. слой изолятора соответствующей толщины.
15. Печь должна быть предложена с уютным изолятором, чтобы обеспечить простоту эксплуатации.
16. Газ обязательно должен оставаться в дополнительном месте не более 1,5 секунды.
17. В зоне первичного горения должны работать как минимум 2 системы отопления.
18. Для 2-го места горения требуется одна система отопления.
19. Каждая система должна иметь дверцы для золы, выход воздуха для дымовой шахты, а также окна, чтобы можно было смотреть внутрь, а также для обслуживания.
20. Каждая система должна иметь систему фильтрации для обработки газа с 2 баками, использующими среднюю воду. Каждый резервуар для воды должен иметь емкость 1000 л и обязательно должен быть отремонтирован в системе в дополнение к тому, чтобы иметь знак степени воды.
21. Каждая система должна иметь уникальную технологию разделения предметов по талии и дополнительно влажность после обработки газа.
22. Каждая система должна иметь возможность охлаждения после обработки.
Каждая система m должна быть снабжена выхлопной трубой размером 250 мм, а также высотой 10 м. Основание выхлопной системы должно быть 1000 мм. Выхлопная система должна быть оборудована индикатором напряжения.
24. Электроэнергия: требуется 220 вольт, 3 фазы, 60 Гц, а также электродвигатель должен быть не намного меньше 15 л.с.
25. Каждая система должна быть снабжена панелью управления, а также знаками и необходимыми устройствами защиты, а также сигнализацией. Панель управления должна иметь минимальную температуру как в секрете, так и в дополнительных местах, а также в инжекторах фильтров и в других тоннах.
26. Каждая система обязательно должна быть снабжена системой защиты и безопасности на случай поломки или проблемы любого типа части системы.
27. Должны быть предложены следующие индивидуальные средства безопасности:
A. Теплостойкая одежда для 20 человек.
б) Теплозащитные очки на 20 человек.
28. Все элементы каждой системы должны быть окрашены теплостойким серебристым цветом.

Incinerator for Pet Crematory Pig Farm Layout A1200


Burner for Pet Crematory Pig Cattle Ranch Variation A1200

*** 3 sets Burners
*** Good for animals or big pets
*** Double Combustion chamber
*** stainless steel chimney
*** Italy made oil burners
*** 1200Liters(1.2m3) big chamber

Version

A1200

Picture

Burning Price

Common 50 kgs/hour

Feed Ability

Requirement 100 kgs/feeding

Key Combustion Chamber

1200 Liters

Second Burning Chamber

500 Liters

Mix Burning Chamber

Yes

Smoke Filter Chamber

Yes( Dry Scrubber)

Feed Mode

Guidebook

Voltage

220V/380V

Fuel Kind

Diesel Oil

Burner

Italy Original

Oil Intake (Diesel Oil)

Average 34.4 kg/hour

Gas Usage (Gas)

***

Interior Dimensions

130x100x90cm (essential chamber)

Outdoors Measurements

220x180x360cm (without chimney)

Temperature Screen

Yes

Oil Tank Ability( if oil fuel)

500 Liters

Door Opening

55 x 80cm

Chimney Size

10.0 Meters

Smokeshaft Kind

Stainless-steel

Equipment Gross Weight

7500 kgs

Treatment Technical Specifications

Main Chamber Temperature Level

800 ℃–– – – -1000 ℃

Extra Chamber Temperature

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Burning Efficiency

> 98%

Waste Lower Calorific Power

3000Kcal

Version

A1200

Interior Dimensions

130x100x90 centimeters

Fit for Pet

Feline – – – – yes

– Dog – yes

Pig – – little

Cow – – no

Key Item Checklist

Main Burning Chamber

Secondary Burning Chamber

Mix-Combustion Chamber

Smoke Filter Chamber( Dry Scrubber)

Burner Control Case

Chimney:10.0 Meters *( upgrade to Stainless-steel, complimentary cost)

Italy oil burner: 03 collections

Oil Tank: 500Liters

HICLOVER – Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-02-11


Incinération de déchets biologiques Hiclover

HICLOVER propose désormais une gamme complète de systèmes d’incinération conteneurisés, nous plaçant à la pointe des dernières tendances du transport et de l’industrie. La conteneurisation permet une gestion immédiate des déchets car les unités sont pré-assemblées et pré-installées.
La conteneurisation est l’option la plus faisable et la plus viable par rapport à la construction d’installations sur place et de structures de logement, éliminant la main-d’œuvre et les coûts impliqués. Le système a l’avantage supplémentaire d’une mobilité totale (à la fois locale et internationale), et est idéal pour les camps militaires et civils et les endroits éloignés où les infrastructures sont rares.

※Caractéristique principale:
– Chambre de combustion double
– Double brûleur Italie
– Taux de combustion: 10-100kgs par heure
-Chambre de combustion: 0.1M3-1.2M3
– Incinérateur mobile, conteneurs d’expédition standard, système facile à déplacer / transport
– Installation gratuite, incinérateur pré-installé, idéal pour les camps
– Stérilisation par lampe ultraviolette à l’intérieur

Articles / modèle TS10 (API) TS20 (API) TS30 (API) TS50 (API) TS100 (API)
Taux de combustion (moyen) 10 kg / heure 20 kg / heure 30 kg / heure 50 kg / heure 100 kg / heure
Capacité d’alimentation (moyenne) 20 kg 40 kg 60 kg 100 kg 200 kilogrammes
Mode de contrôle PLC PLC PLC PLC PLC
Chambre de combustion 100 L 210 L 330 L 560 L 1200 L
Dimensions internes 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100 cm
Chambre secondaire 50 L 110 L 180 L 280 L 600 L
Chambre de filtre à fumée Oui Oui Oui Oui Oui
Mode d’alimentation Manuel Manuel Manuel Manuel Manuel
Tension 220V 220V 220V 220V 220V
Pouvoir 0,5 Kw 0,5 Kw 0,5 Kw 0,7 kW 0,7 kW
Consommation d’huile (kg / heure) 5,4–12,6 7,8–16,3 10,2–20 12,1–24 14-28
Consommation de gaz (m3 / heure) 6,2–11,4 8–15,7 9,8–20 9,9–26,1 10–32,2
Moniteur de température Oui Oui Oui Oui Oui
Protection de la température Oui Oui Oui Oui Oui
Cuve à mazout 100 L 100 L 100 L 100 L 200 L
Porte d’alimentation 30x30cm 45 x 40 cm 55 x 50 cm 70 x 55 cm 80x60cm
Cheminée 3 mètres 3 mètres 5 mètres 5 mètres 10 mètres
Type de cheminée Acier inoxydable Acier inoxydable Acier inoxydable Acier inoxydable Acier inoxydable
1er. Température de la chambre 800 ℃ –1000 ℃ 800 ℃ –1000 ℃ 800 ℃ –1000 ℃ 800 ℃ –1000 ℃ 800 ℃ –1000 ℃
2ème. Température de la chambre 1000 ℃ -1200 ℃ 1000 ℃ -1200 ℃ 1000 ℃ -1200 ℃ 1000 ℃ -1200 ℃ 1000 ℃ -1200 ℃
Temps de résidence 2,0 sec. 2,0 sec. 2,0 sec. 2,0 sec. 2,0 sec.
Poids brut 1 500 kg 2200 kg 3000 kg 4500 kg 6000 kg
Dimensions extérieures 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm
Équipement Incinérateur de déchets médicaux infectieux à double chambre Capacité 10-30 kg par heure Caractéristiques des déchets
Principalement des seringues et des aiguilles provenant des activités de routine et de campagne de vaccination. Cependant, les caractéristiques moyennes suivantes sont prises en compte *:
pouvoir calorifique supérieur à 2000 kcal / kg (8370 kJ / kg); teneur en matière combustible supérieure à 60%; teneur en solides non combustibles inférieure à 5%; contenu de
fines incombustibles inférieures à 20%; teneur en humidité inférieure à 30% en poids
Performance de combustion: l’incinérateur de déchets medica doit être capable de réduire les déchets en cendres ne dépassant pas 10% du combustible total.
des charges.
Installation extérieure. L’incinérateur de déchets médicaux sera installé à l’extérieur. Tous les composants de l’incinérateur doivent être adaptés, mais non
limité à une installation extérieure ombragée, y compris les moteurs électriques, résiste à la corrosion, à l’humidité et aux éléments météorologiques connexes.

Matériaux de construction: L’incinérateur ne doit pas contenir d’amiante, de substances contenant de l’amiante, de thermomètres à mercure et de mercure
commutateurs. Les matériaux réfractaires doivent être en mesure de répondre aux normes pertinentes de l’ISO TC33 et du CEN / TC 187.

Types de conception d’incinérateur acceptables: incinérateur à air contrôlé à double chambre ou incinérateur pyrolytique à double chambre


WWW.HICLOVER.COM | Incinérateurs de déchets | Filtres à air automatiques

Nanjing Clover Medical Technology Co., Ltd.

Tél: + 86-25-8461 0201
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]

ครัวกลางหนานจิง Ruleyuan

2019-05-20 ผลลัพธ์และ กรณี418 views

แนะนำโครงการ: บริษัทเป็นองค์กรจัดเลี้ยงขนาดใหญ่และห่วงโซ่อาหารฟาสต์ฟู้ดในหนานจิง ผู้นำของบริษัทเห็นว่าการบูรณาการและการพัฒนาขนาดใหญ่ของครัวส่วนกลางกลายเป็นแนวโน้มการพัฒนาของอุตสาหกรรมการจัดเลี้ยงและลงทุนในการทำความสะอาดที่ทันสมัยและทันสมัย โรงงานในอำเภอปูโข่ว ใช้สำหรับผลิตอาหารจานด่วนขนาดใหญ่

URL เนื้อหาเพิ่มเติม: www.ecolead.cn โทร: 025-57138032

clinical waste burner


Australian burning style exclusive 5 25kg/hour
double chamber( LPG) burner or equal approved. burner
casing to be light steel with 125mm refractory lining containing
essential and second chamber, protected draft area above
second chamber, bundle burners, electronic temperature level control
systems, ash rake as well as poke, 2nd door in main chamber,
hands-on filling chute, semi automated operated counter well balanced
packing door with packing tray complete with stainless-steel flue
recommended extra components.


Medical Incinerators Supplier in China


*** Primary combustion chamber & secondary combustion chamber
*** Smoke filter chamber(dry scrubber)
*** stainless steel chimney
*** PLC auto. control
*** Italy made oil or gas burner(diesel oil/natural gas/lpg)
*** temperature display and control
*** high temperature firebrick,etc
Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity(Average) 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm
HICLOVER – Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-02-10