Blog

Взрывозащищенный фильтр с автоподзаводом

2019-05-10 Фильтр автоматической обмотки659 просмотров



Внедрение продукции:

Фильтр с автоматической намоткой – это фактически новый тип оборудования для фильтрации воздуха.Это автоматическое оборудование, которое выполняет замену фильтра путем преобразования разницы давлений между передней и задней частью фильтра в сигнал датчика. Взрывозащищенный раневой фильтр – это специальное фильтрующее оборудование, используемое в специальных отраслях промышленности, таких как химические заводы, и скрывает опасность воспламенения и взрывоопасных сред

Принцип работы

Он в основном состоит из фильтрующего материала, взрывозащищенной системы передачи и взрывозащищенной автоматической системы управления.

Новый фильтрующий материал устанавливается в загрузочную коробку. Когда всасываемый воздух с высокой концентрацией запыленного воздуха проходит через обмоточный фильтр, разница давлений между передней и задней частью фильтра постепенно увеличивается с увеличением количества пыли; когда фильтр сопротивление возрастает до установленного конечного сопротивления Когда значение установлено, реле перепада давления начинает действовать, и система намотки обновляет фильтрующий материал; когда время прокатки достигается, трансмиссия останавливается, обновление фильтрующего материала завершается , и фильтр перезапускается.

Особенности продукта:

* Соответствует классу взрывозащиты Eexd IIBT4, класс защиты IP55

* Прочная конструкция, может соответствовать самым суровым рабочим условиям

* Интеллектуальная система замены фильтрующего материала, эффективная экономия энергии и снижение затрат * Модульная конструкция может удовлетворить любые требования к конструкции и установке системы

* Различные материалы и варианты конфигурации для низкого, среднего и высокого уровня для удовлетворения различных потребностей клиентов

Взрывобезопасность, общий знак искробезопасности ib-level
II Завод взрывозащищенного оборудования
B Применимые случаи, когда легковоспламеняющиеся и взрывоопасные газы относятся к газам класса B (включая газы класса A)
T4 устройства
не превышает максимальную температуру поверхности 135 градусов.

Материал: высококачественная краска для холоднокатаной стали, алюминиевый профиль или SUS 304

Управление: ручное, управление разницей времени / давления, фотоэлектрическое управление, управление ПЛК

Материал фильтра: специальный сетчатый фильтрующий материал, эффективность G3, G4 (EN779)

Установка: Готовый продукт можно эксплуатировать на месте доставки, только если он включен. Если пространство для установки на месте ограничено, детали могут быть упакованы и отправлены. Товары могут быть гибко собраны и сформированы на месте.  

Приложения:

* Эффективно фильтруйте свежий воздух в чистой комнате крупными частицами воздуха, чтобы обеспечить более качественный воздух в чистой комнате;

* Эффективно предотвращает появление пятен вокруг выхода свежего воздуха из кондиционера, а срок службы высокоэффективного фильтра средней эффективности в задней части дворца долгий;

* Эффективно предотвращайте накопление серьезной пыли в воздуходувке очистных сооружений и устанавливайте ее на переднем конце воздуходувки, чтобы эффективно защитить воздуходувку;

* Для системы фильтрации воздуха на химических заводах, текстильных фабриках, цехах распыления и т. Д. Выполните первоначальную фильтрацию для удаления большей части твердых частиц и эффективного улучшения качества выхлопных газов и циркулирующего газа.

Детали функции управления:

Стандартная функция

Индикатор питания

Защита двигателя

Индикация аварии фильтрующего материала

Ручное / автоматическое управление

Дополнительная функция

Индикация перепада давления

Выход сигнала тревоги фильтрующего материала (пассивный сигнал сухой контакт)

Выход сигнала о работе двигателя / неисправности (пассивный сигнал, сухой контакт)

Таблица параметров размера продукта и объема воздуха

Примечание: 1. Значение объема воздуха рассчитано при указанной выше скорости ветра @ 2,5 м / с.

2. Если ширина> 06 футов, его необходимо разделить на несколько частей и собрать.

   3. Может предоставить клиентам различные нестандартные размеры.

Стандартный чертеж

URL с дополнительным содержанием: www.ecolead.cn Тел: 025-57138032

Dual Chamber Incinerator available for sale 50-200kgs per hr( in supply).


We supply Double Chamber Incinerator with primary chamber size average 1570Liters and burnning rate 50kgs per hour,100kgs per hour,150kgs per hour,200kgs per hour.

the incinerators are now ready for shipping.

Contact with us for quick respond: +86-13813931455

Secret Product Listing per 01 collection

Trick Burning Chamber

Secondly Burning Chamber

Smoke Filter Chamber

Incinerator PLC Control Situation

Smokeshaft:10.0 Meters

*( upgrade to Stainless-steel, cost-free price)

Italy oil/gas burner: 02 devices

Oil Container (if oil gas): 300Liters

Items/Model

TS150( PLC)

Idea

Waste Incineration Therapy

Shed Rate

Criterion 50/100/150/ 200 kg/hour

Feed Capability

Average 750kg/feeding

Control Establishing

PLC( Programmable Thinking Controller Incinerator)

Combustion Chamber

1570L

Internal Dimensions

150x100x105cm

Second Chamber

750L

Smoke Filter Chamber

Yes

Feed Setting

Manual

Voltage

210/230V 50/60Hz

Power

0.9 Kw

Oil Usage (kg/hour)

Ordinary 20.4( D.O)

Thermal ability( kw/hour)

166-332

Gas Use (m3/hour)

***

Temperature Level Show

Digital Existing

Temperature Protection

Yes

Oil Storage Tank

300L

Feed Door

80x60cm

Smokeshaft

10Meter

Smokeshaft Kind

Stainless-steel

1st. Chamber Temperature Level

800 ℃–– – – -1000 ℃

secondly. Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

8500kg

Exterior Dimensions

300x160x280cm( without smokeshaft)


Medical Incinerator 10kg/Hour

Product Description

Technology Respond(FAQ) 

Q: What is kind of waste can use in this equipment? 
A: This equipment for medical waste, pet animal, Municipal waste, live waste. Prohibit any explosive and radiation material, liquid waste and gas waste. 

Q: Incinerator Smoke Standard 
A: China Government Standard: No. GB18484-2001. 

Q: Treatment capacity 
A: Average Capacity calculated by medical waste(lower calorific power (L. C. P): 3.0TH Kcal/Kg per hour), not mean any waste material. The animal/pet combustion rate around 2/3 of average capacity. 

Clover incinerator use time per day up to 24 hours. Between each feed/combustion time, there are about 0.5-1 hours cooling time and time for feeding waste. Actual combustion time per day is around 16 hours. The lifetime of incinerator between 5-10 year according to use. 

Generally, we proposal small laboratory, small clinic use capacity under 20 kgs per hour. When incinerator use in hospital, please calculate the waste output capacity around 2kgs per people per day. If there are 200 sickbed in the hospital, that’s mean you need one incinerator capacity around 400kgs per day, change to capacity per hour is around 30-40 kgs per hour. According the operation time per day, waste material, budget, development, etc, you can use capacity from 30-50 kgs per hour incinerator. 
*How to calculate Animal Cremation Burn Rate: 2/3 of the medical waste. 

Q: Assembly and Testing 
A: We supply all documents and incinerators easy to installation and operation. Customer can send people come to our factory to learn installation and operation. Small scale medical waste incinerator, syc-30 incinerator, waste incinerator manufacturer China, Generally, We do not send engineer to local site if not request. The dispatch cost is extra according to order. 

Q: Combustion Temperature 
A: The first combustion chamber: 800-1000 centi degree. 
The second combustion chamber: 1000-1200 centi degree. 

Q: Incinerator Control Mode 
A: Default Control mode is common control case. PLC mode according to model and order. 

Q: Operation and maintenance costs 
A: Operation cost according to fuel consumption rate and power/staff, etc. 

Annual around $500-$1000USD per year maintenance according model, use situation. 

One person can service 02 unit incinerators. The staff should have basic electrician knowledge to operate/inspect/maintaince incinerator/burner/blower according to operation user guider, and know risk of medical waste to protect worker self with necessary protection element. 

Q: The Residency time in secondary combustion chamber 
A: 02 sec.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

ข้อควรระวังในการว่าจ้างเครื่องกรองอากาศแบบหมุนอัตโนมัติ

22 พฤษภาคม 2019 Industry News 435 views

หลังจากติดตั้งและแก้ไขตัวกรองกลิ้งม่าน Ecolead อัตโนมัติของหนานจิง Yixiou หน่วยงานก่อสร้างอาจมีข้อสงสัยเมื่อแก้จุดบกพร่อง. ผมกลัวว่าไม่มีความร่วมมือของวิศวกรบริการหลังการขายของเราแก้จุดบกพร่องที่อาจจะมีความไม่แน่นอนหรือผลสุดท้ายไม่พอใจ . วันนี้เราจะ สรุปประเด็นสำคัญหลายประการโดยกระชับเพื่อให้เพื่อนร่วมงานและลูกค้า พิจารณา

1. ทิศทางลมเข้าและออก ตัวกรองไขลานอัตโนมัติจะควบคุมความแตกต่างระหว่างทิศทางขาเข้าและทางออกโดยอัตโนมัติผ่านการมีอยู่ของการควบคุมความแตกต่างของแรงดัน นั่นคือ แรงดันบวกที่ด้านขาเข้าและแรงดันลบที่ด้านทางออก หากทิศทางของทางเข้าและทางออก ด้านจะกลับด้านระหว่างการติดตั้งจริง แม้กระทั่งด้านขาเข้าและทางออก หากความแตกต่างของแรงดันจริงถึงหรือเกินกว่าค่าที่ตั้งไว้ อุปกรณ์จะไม่ทำงาน ในขณะนี้ มีความจำเป็นต้องย้อนกลับท่ออากาศที่เชื่อมต่อกับพื้นผิวทางเข้าและทางออกของอากาศที่สวิตช์ความดันแตกต่าง ดังนั้น เมื่อทำการดีบั๊ก ก่อนอื่นให้พิจารณาว่าทิศทางของทางเข้าและทางออกของอากาศที่สอดคล้องกับท่ออากาศสวิตช์ความแตกต่างของแรงดันนั้นถูกต้องหรือไม่

2. สถานะโหมดอัตโนมัติ มีสองโหมดการทำงานด้วยโหมดอัตโนมัติ คุณต้องกดปุ่มเพื่อเข้าสู่โหมดอัตโนมัติ หากไม่อยู่ในโหมดอัตโนมัติ ตัวกรองไขลานอัตโนมัติจะไม่ทำงานโดยอัตโนมัติ หนานจิง อิซิโอ

3. ตรวจสอบวัสดุกรอง ก่อนอื่น จำเป็นต้องตรวจสอบว่าท่อไขลานวัสดุกรองใหม่ในกล่องวัสดุกรองใหม่และท่อไขลานวัสดุกรองเก่าที่ด้านล่างอยู่ในช่องเสียบการ์ดหรือไม่ มิฉะนั้น อาจเกิดความล้มเหลวในการส่งระหว่าง การทำงานและแม้กระทั่งชิ้นส่วนอาจเสียหายได้ จากนั้น Nanjing Yixiou ตรวจสอบว่าวัสดุกรองสกปรกเกินไปหรือไม่เพราะใช้เวลานานกว่าตัวกรองจะได้รับพลังงานสำหรับการดีบัก ในระหว่างกระบวนการนี้ วัสดุกรองมีฝุ่นจำนวนมากปนเปื้อน เมื่ออุปกรณ์ดูดเริ่มทำงาน ความแตกต่างของแรงดันระหว่างด้านหน้าและด้านหลังของวัสดุกรอง ค่าที่สูงกว่าค่าที่ตั้งไว้ และการบังคับสตาร์ทภายใต้แรงดันลบขนาดใหญ่จะทำให้ตัวกรองไขลานอัตโนมัติเสียหาย ในเวลานี้ อุปกรณ์ดูดควรหยุดลง ควรเปลี่ยนวัสดุกรองสกปรกในโหมดแมนนวล จากนั้นจึงควรเปิดอุปกรณ์ดูดเพื่อแก้ไขข้อบกพร่องต่อไป

4. ตรวจสอบว่าทิศทางการหมุนของมอเตอร์ถูกต้องหรือไม่ เมื่อเทียบกับมอเตอร์แบบเฟสเดียว มอเตอร์ 3 เฟสจะวิ่งได้คล่องและมีเสียงรบกวนน้อยกว่า ดังนั้น บานม้วนอัตโนมัติจึงใช้มอเตอร์สามเฟสเป็นส่วนใหญ่ และมอเตอร์ 3 เฟสมีปัญหาเรื่องการหมุนเดินหน้าและถอยหลัง จึงต้องใช้ ป้อนระหว่างการดีบัก โหมด manual จะทำงานชั่วครู่เพื่อกำหนดทิศทางของมอเตอร์ เลี้ยวขวาจากซ้ายไปดู การทำงาน ทวนเข็มนาฬิกา หนานจิง อิซิโอ

 

วิธีการแก้ไขจุดบกพร่องและประสบการณ์ของตัวกรองอากาศแบบขดข้างต้น หวังว่าจะช่วยให้ลูกค้าคนสำคัญของเราเป็นที่รู้จักในกระบวนการดีบัก

URL เนื้อหาเพิ่มเติม: www.ecolead.cn โทร: 025-57138032

Simply just how you can find practical incinerators for your regional site?


The heater with dual/double combustion chamber as well as completely dry filter chamber, two gas burner from

Italy created, hot sale version for little range waste result, the ability is 30kgs per hr

as well as likewise 50kgs per human resources.

Heater is not a cost-effective gadgets, generally the tiny range version’s cost around $5,000 usd per device

We are famous small scale incinerator manufacturer and brand, dispatch incinerator products 
and best services with lower price for customer all around the world.

as well as massive range version’s price even more than $50,000 usd each. Before purchase one system burner,

you have to make clear adhering to products:

A, burn what?

you have to make clear adhering to products:

A, burn what? Incinerator is a incineration tools, function is fire waste. What kind of

waste you want to treatment?

B, tiny or huge? This according to the waste result each day or the waste volume per

feed time, like animal dimension.

C, fuel? Incinerator use oil or gas fuel, usually, gas fuel is cheaper than oil and the smoke

cleaner than oil gas version. Some neighborhood website do not have gas supply system.

As well as other technology items, like power( 220v, 380v), waste feed door kind, burner framework, etc.

WWW.HICLOVER.COM|Waste Incinerators |Auto Roll Air Filters
Nanjing Clover Medical Technology Co.,Ltd.

Tel: +86 -25 -8461 0201

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity(Average) 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm


Waste Management Incinerator Technology

Basic Info.

Model NO.:incinerator manufacturers
Export Markets:Global

Product Description

Technology Respond(FAQ) 

Q: What is kind of waste can use in this equipment? 
A: This equipment for medical waste, pet animal, Municipal waste, live waste. Prohibit any explosive and radiation material, liquid waste and gas waste. 

Q: Incinerator Smoke Standard 
A: China Government Standard: No. GB18484-2001. 

Q: Treatment capacity 
A: Average Capacity calculated by medical waste(lower calorific power (L. C. P): 3.0TH Kcal/Kg per hour), not mean any waste material. The animal/pet combustion rate around 2/3 of average capacity. 

Clover incinerator use time per day up to 24 hours. Between each feed/combustion time, there are about 0.5-1 hours cooling time and time for feeding waste. Actual combustion time per day is around 16 hours. The lifetime of incinerator between 5-10 year according to use. 

Generally, we proposal small laboratory, small clinic use capacity under 20 kgs per hour. When incinerator use in hospital, please calculate the waste output capacity around 2kgs per people per day. If there are 200 sickbed in the hospital, that’s mean you need one incinerator capacity around 400kgs per day, change to capacity per hour is around 30-40 kgs per hour. According the operation time per day, waste material, budget, development, etc, you can use capacity from 30-50 kgs per hour incinerator. 
*How to calculate Animal Cremation Burn Rate: 2/3 of the medical waste. 

Q: Assembly and Testing 
A: We supply all documents and incinerators easy to installation and operation. Customer can send people come to our factory to learn installation and operation. Generally, We do not send engineer to local site if not request. The dispatch cost is extra according to order. 

Q: Combustion Temperature 
A: The first combustion chamber: 800-1000 centi degree. 
The second combustion chamber: 1000-1200 centi degree. 

Q: Incinerator Control Mode 
A: Default Control mode is common control case. PLC mode according to model and order. 

Q: Operation and maintenance costs 
A: Operation cost according to fuel consumption rate and power/staff, etc. 

Annual around $500-$1000USD per year maintenance according model, use situation. 

One person can service 02 unit incinerators. Hospital incinerator manufacturers, incinerator burners, incinerator diesel burn, incinerator manufacturer china, incinerator medical waste manufacturer, incinerator suppliers, The staff should have basic electrician knowledge to operate/inspect/maintaince incinerator/burner/blower according to operation user guider, and know risk of medical waste to protect worker self with necessary protection element. 

Q: The Residency time in secondary combustion chamber 
A: 02 sec.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Waste burners extra components


HICLOVER now supplies additional components including:

— — — — Burners (diesel oil, LPG or gas)

— — — — Facet for heaters

— — — — Fire ropes

— — Incinerator chamber maintenance items

— — — — Air Follower


Чистый сарай

2019-05-10 Оборудование для очистки воздуха493 просмотра



Внедрение продукции

Чистый навес – это самый быстрый и удобный способ построить простую чистую комнату. В качестве рамы используется промышленный алюминий (или нержавеющая сталь, квадратная труба с охлаждающей пластиной), для подачи воздуха используется собственный вентиляторный фильтр (FFU), а также -статические мягкие шторы (или акриловый картон) корпус, уровень внутренней очистки может достигать от 100 до 100000.

Он подходит для тех участков в цехе, где требуется высокая чистота, таких как рабочая зона сборочной линии и зона высокоточной сборки продукции.

Принцип работы:

Воздуходувка всасывает воздух из верхней части FFU. После начальной высокоэффективной фильтрации отфильтрованный чистый воздух с равномерной скоростью направляется в чистый сарай на поверхности выхода воздуха для формирования текущего однородного слоя, и воздушный поток является однонаправленным, что обеспечивает соблюдение требований в рабочей зоне. Чистота и безопасность.

Особенности продукта:

* Собранная конструкция, проста в установке, что значительно сокращает цикл доставки;

* Легко перемещается, можно установить бесшумное универсальное колесо;

* Подходит для строительства небольших чистых территорий;

* Модульная структура, простота повышения уровня очистки, высокая масштабируемость и высокая ценность повторного использования;

* По сравнению со сверхчистым верстаком доступное внутреннее пространство велико;

* По сравнению с традиционным чистым помещением, стоимость невысока, строительство быстрое, а высота этажа не ограничена.

Конфигурация продукта:

         1. Технические характеристики: У этого продукта нет окончательных технических характеристик, и он изготавливается в соответствии с потребностями клиентов.

2. Рама: алюминиевый профиль (стабильный, красивый, без ржавчины, без пыли).

         3. Статический занавес: сетка 0,5 ммT (хороший антистатический эффект, высокая прозрачность, прозрачная сетка, хорошая гибкость, отсутствие деформации, нелегкое старение, пыленепроницаемость и антистатичность)

         4. Верхняя крышка чистой комнаты изготовлена из алюминиево-пластиковой пластины толщиной 3 мм.

        5. Частичное использование специальных очистительных ламп для чистых помещений.

         6. Фильтрующий блок FFU: Центробежный вентилятор переменного тока переменного тока, спецификация 1175 * 575 * 250 мм, начальная высокоэффективная двухступенчатая система фильтрации, эффективность фильтрации 99,99% (0,3 мкм), регулируемая скорость ветра, максимальный объем воздуха: 1200 м3 / ч) ; Длительный срок службы, низкий уровень шума, отсутствие необходимости в обслуживании, низкая вибрация, бесступенчатая регулировка скорости и другие характеристики, надежное качество, длительный срок службы и уникальная конструкция воздуховода значительно повышают эффективность вентилятора и снижают уровень шума

        7. Блоки фильтров вентилятора FFU расположены с интервалами вверху для достижения десяти тысяч уровней очистки.

Стандартный чертеж

URL с дополнительным содержанием: www.ecolead.cn Тел: 025-57138032

incinerator installation demo

The switchboard shall operate in a room with the following prevailing conditions:

 

–      Maximum ambient temperature of 40 0C

–      Maximum relative humidity of 95%

–      Saline atmosphere

–      Altitude: at sea level

–      Climate type: Wet and humid coastal conditions with cyclone associated to a small

tropical island in the Indian Ocean

MAIN DATA

 

Nominal Voltage 400 Vacs

 

 

Rated Insulation Voltage         1000 Vac

 

Rated frequency

50 Hz

 

Common Auxiliary Busbar:

 

–      Material

 

–      Degree of protection

 

 

IP 41

Copper

 

Ambient temperature Max. 400C

 

 

 

 

Relative humidity      Max. 95%

 

 

 

 

Surface Treatment      Manufacturer’s standard paint protection for prevailing

environment conditions

 

 

 

 

Access   Front and rear

 

 

Cable entry   Bottom

 

 

Standard      IEC

 

 

Auxiliary Voltages:

 

–      Spring charging motor      110 V DC

 

 

–      Control circuits   110 V DC

 

 

–      Indication lamp Circuits   110 V DC

Incinirator of Veterinary Hospital

Basic Info.

Model NO.:incinerators for hospitals from china
Export Markets:Global

Product Description

Technology Respond(FAQ) 

Q: What is kind of waste can use in this equipment? 
A: This equipment for medical waste, pet animal, Municipal waste, live waste. Prohibit any explosive and radiation material, liquid waste and gas waste. 

Q: Incinerator Smoke Standard 
A: China Government Standard: No. GB18484-2001. 

Q: Treatment capacity 
A: Average Capacity calculated by medical waste(lower calorific power (L. C. P): 3.0TH Kcal/Kg per hour), not mean any waste material. Incinerator price, incinerator price for 50kg/hr made in china, incinerator producers, incinerator small scale, incinerator suppliers in china, incinerator toilets china, The animal/pet combustion rate around 2/3 of average capacity. 

Clover incinerator use time per day up to 24 hours. Between each feed/combustion time, there are about 0.5-1 hours cooling time and time for feeding waste. Actual combustion time per day is around 16 hours. The lifetime of incinerator between 5-10 year according to use. 

Generally, we proposal small laboratory, small clinic use capacity under 20 kgs per hour. When incinerator use in hospital, please calculate the waste output capacity around 2kgs per people per day. If there are 200 sickbed in the hospital, that’s mean you need one incinerator capacity around 400kgs per day, change to capacity per hour is around 30-40 kgs per hour. According the operation time per day, waste material, budget, development, etc, you can use capacity from 30-50 kgs per hour incinerator. 
*How to calculate Animal Cremation Burn Rate: 2/3 of the medical waste. 

Q: Assembly and Testing 
A: We supply all documents and incinerators easy to installation and operation. Customer can send people come to our factory to learn installation and operation. Generally, We do not send engineer to local site if not request. The dispatch cost is extra according to order. 

Q: Combustion Temperature 
A: The first combustion chamber: 800-1000 centi degree. 
The second combustion chamber: 1000-1200 centi degree. 

Q: Incinerator Control Mode 
A: Default Control mode is common control case. PLC mode according to model and order. 

Q: Operation and maintenance costs 
A: Operation cost according to fuel consumption rate and power/staff, etc. 

Annual around $500-$1000USD per year maintenance according model, use situation. 

One person can service 02 unit incinerators. The staff should have basic electrician knowledge to operate/inspect/maintaince incinerator/burner/blower according to operation user guider, and know risk of medical waste to protect worker self with necessary protection element. 

Q: The Residency time in secondary combustion chamber 
A: 02 sec.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm