Blog

mobile burner


  1. Petrol: diesel
  1. Consumption: 8-10liter/hour
  1. Capacity: to cremate (carrion and spoils) 350-400kg/hour
  1. Temperature: 900-1350?C
  1. Operation temperature: -30~40?C
  1. Incinerator weight: 1800-2000 kg
  1. Volume: 0.70-0.80m/cube
  1. Exterior dimension: 1.4-1.6*1.0-1.15m (L*W)

A heater stands for a complete service to the problem of disposal of all clinical facility waste kinds. The fluid fuel

is diesel. The burner ought to meet the setup requirements. Expected Technical specifications

The burner will be totally self included. incinerators that are stainless

steel with destruction rate of 15kg per hr. bactch lots of 10-15kg of

waste in addition to average temperature degree of 8500 degress c.


Surveillance des déchets des installations médicales

La gestion des déchets hospitaliers ainsi que des prix compétitifs car le Pakistan est un marché concurrentiel. Nous avons une configuration complète avec le bureau, la relation client, l’import / export, le département biomédical, le département de support applicatif et le département de conception de projet.
Norme de conception Incinérateur à chambres multiples conforme à la conception des normes EPA, contrôle de la pollution de l’air
Description de la cheminée montée sur le dessus, autoportante
Performances de l’incinérateur 150 kg / h
Refuser les déchets hospitaliers et les carcasses
Températures recommandées Minimum 1000⁰C
Dimensions:
Longueur
Largeur
Hauteur
Largeur supplémentaire pour les brûleurs Au moins 3000 mm
Ouverture de la porte de chargement Minimum 700 mm x 600 mm
Surface du foyer 5,00 mètres carrés
Description ou grille / foyer Un foyer plein fourni pour empêcher les liquides contaminés de s’écouler dans la fosse à cendres sans être incinérés
Volume de la chambre primaire Au moins 3 mètres cubes
Volume de la chambre de mélange Au moins 1 mètre cube
Volume de la chambre de décantation Au moins 3 mètres cubes
Poids hors cheminée 15 000kg à la fabrication
Outils de tir fournis Houe, tisonnier et râteauMatériau de construction Boîtier – acier doux de 5 mm.
Bracing – Angle et canal lourds.
Hearth – Béton réfractaire monolithique moulable à usage général, haute résistance et haute résistance à l’abrasion, à 1550 ° C.
Porte incendiaire – Fonte de haute qualité.
Porte de chargement – acier doux de 5 mm revêtu de béton réfractaire monolithique moulable à usage général à haute résistance et à haute résistance à l’abrasion à 1550 ° C.
Béton réfractaire:
Teneur en alumine du réfractaire
Épaisseur réfractaire
Minimum 49%
Au moins 127 mm.
Isolation des murs Isolation moulable 1000⁰C
Cheminée:
Chimney
Hauteur à partir de la base Acier doux de 3,5 mm
9 mètres au-dessus du niveau du sol et dégager le point le plus élevé du bâtiment d’au moins 3 mètres
Au moins 560 mm
Au moins 750 kg
Les contrôles:
Brouillon

Arrivée d’air

Électrique

Indicateur barométrique, limiteur de tirage actionné par la porte

Gaines d’air chauffé forcé intégrées, primaire et secondaire (intensificateur)
Panneau de commande – Disjoncteurs, interrupteur principal, minuterie, veilleuses, pyromètre à 2 points de consigne et un pyromètre à point de consigne.
Alimentation électrique requise 415 volts triphasé.
Carburant auxiliaire Fonctionnement électrique uniquement
Émissions Conception à plusieurs chambres avec contrôle des émissions intégré
Peinture: Boîtier et pile gris résistant à la chaleur 400 ° C
Température du boîtier 100⁰C

Small Veterinary Incinerator 20 Kg Hour Burn Rate

Basic Info.

Model NO.:smallest waste incineration into energy system
Export Markets:Global

Product Description

Waste Incinerator International Market Analytics 
Date. Jun. 10, 2012 
Download: Word format / PDF format 

Key Word: 
Small incinerators 
Medical waste incinerator 
Pet animal cremation incinerator 
Incinerator manufacturers 

Incinerator is a incineration equipment, direct fire waste by gas fuel or oi fuel. As different circumscription, incinerator can be named many words as below: 

Treatment capacity: Small scale incinerator, large scale incinerator and incineration pant. 
Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators 
Incinerator fuel: Gas incinerator, oil incinerator 
Waste to Energy (WTE): WTE incinerator, non-WTE incinerator 
Incinerator Manufacturer: China incinerator manufacturer, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer. 
Famous Incinerator manufacturer company: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India) 
Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour 

Pyrolytic incineration technical is traditional waste treatment way for many years. All over the world, in many countries, people anti incinerator because the incinerator will produce a large Dioxin in the smoke. “Dioxins” refers to a group of toxic chemical compounds that share certain chemical structures and biological characteristics. Dioxins can be released into the environment through forest fires, backyard burning of trash, certain industrial activities, and residue from past commercial burning of waste. Dioxins break down very slowly and past releases of dioxins from both man-made and natural sources still exist in the environment. Medical incinerators 40 kgs capacity, medical incinerators china, medical incinerators manufacturer, medical solid waste incinerator 100kg, medical wast incinerator, Anyhow, we have to remind that, this is large scale incineration pant, generally more than 30 ton per day. This is a social problem, to analyze and suggest ways in different angles from the public, government, economic development, environmental protection, technology development, etc. 

So, why we still use incinerator? 
First, for the medical waste from hospital, the pyrolytic incinerators is best treatment up to now. Pyrolytic technology can kill the virus, pollution control. 
Second, for human body, pet animal, in many countries and regions, we desire to cremation them. This is the ceremony in the process of society development, and ceremonies to commemorate the disappearance of life. 

As above two reason but not only above, we still use incinerators. 

How you can find reasonable incinerator for your local site? 
Incinerator is not a cheap equipment, generally the small scale model’s price around $5, 000USD per unit and large scale model’s price more than $50, 000USD per unit. So, before purchase one unit incinerator, you have to make clear following items:
A, burn what? Incinerator is a incineration equipment, function is fire waste. So what kind of waste you want to treatment? 
B, small or large? This according to the waste output every day or the waste volume per feed time, like animal size. 
C, fuel? Incinerator use oil or gas fuel, generally, gas fuel is cheaper than oil and the smoke cleaner than oil fuel model. But some local site don’t have gas supply system. 
And other technology items, like power(220V, 380V), waste feed door type, incinerator structure, etc. 

After you clarify these, you can go to find a local or international manufacturers, asking prices, technical specifications and ultimately purchasing the right products. 

Wrote by Nicky

Items/Model YD-30 YD-50 YD-100 YD-150
Burning Rate (kgs/Hour) 30 kgs/Hr. 50 kgs/Hr. 100 kgs/Hr. 150 kgs/Hr.
Feed Capacity (kgs) 60 kgs 150 kgs 200 kgs 300 kgs
Equipment Weight 2300 kgs 4000 kgs 4300 kgs 7000 kgs
Primary Chamber (Liters) 360 900 1200 1500
Secondary Chamber (Liters) 200 200 500 500
External Dimensions (cm) 145x90x175 200x160x230 220x180x360 240x170x380
Internal Dimensions (cm) 100x60x60 120x90x85 130x100x90 150x100x96
Oil Tank(Liters) 200 300 300 500
Door Opening (cm) 48 x 60 62 x 80 55 x 80 59 x 81
Chimney (M) 5 5 10 10
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES

Wastes That Can be Melted or Blazed


waste itself, running problems in the shed chamber (i.e. temperature degree, holding time as well as likewise disturbance) and also

motorist capability. Waste having chlorinated materials (i.e. chlorinated

solvents and plastics, PVC piping, lumber treated with pentachlorophenol or PCB-amended paint, aquatic driftwood)

should be divided from different other waste as their burning will absolutely result in the de novo advancement as well as exhaust of numerous

dioxin as well as furan substances. Various other waste that requires to not be lost unless utilizing particularly created

incinerators consist of made usage of lubricating oil, hydrocarbon contaminated soil, biomedical waste, sewer sludge or any kind of kind of

other waste especially restricted by the Department of Environment.

solvents and plastics, PVC piping, timber treated with pentachlorophenol or PCB-amended paint, marine driftwood)

must be separated from various other waste as their burning will certainly result in the de novo development as well as exhaust of various

dioxin and furan compounds. Waste including mercury (i.e. batteries, thermostats as well as fluorescent light bulbs) as well as

various other hefty metals (i.e. lead acid batteries, timber treated with lead paint) should not be burned as the mercury

as well as heavy steels will not be ruined. Other waste that needs to not be shed unless using specially developed

incinerators consist of made use of lubricating oil, hydrocarbon contaminated soil, biomedical waste, sewer sludge or any kind of

other waste specifically prohibited by the Division of Environment.

Table 2 supplies a listing of typical wastes that can be shed and those that call for special factor to consider and

therapy. Note that open burning and incineration are recognized as separate columns in the table which

various restrictions apply relying on which approach is used. In general, much more restrictions relate to the

different techniques of open burning because of the incomplete combustion achieved. Fewer restrictions put on

incineration as a result of the operator’s capability to control the burning procedure.

Non-combustible products such as steel and also glass do not burn as well as will certainly rob warmth away from waste that can be

ruined by burning. Flammable waste needs to always be separated from non-combustible waste prior to being filled

into the melt chamber.


Incinerador de desechos médicos de 100 kg por hora

Descripción del producto

Nanjing Clover Medical Technology Co., Ltd. es un fabricante líder de incineradores de desechos en China. Somos fabricantes locales y uno de los mayores exportadores de China. El equipo técnico de incineración pirolítica es el principal tratamiento de desechos en todo el mundo, para desechos médicos, incineración de animales, cremación de mascotas y otros wste sólidos. La capacidad de 10kgs / Hr. Hasta 500kgs / Hr., Hasta 6ton por día. Actualmente, suministramos diferentes series para los requisitos de los clientes locales y diseñamos un incinerador actualizado con nuestra tecnología líder. La característica de diseño actualizado de nuestra gama de incineradores los convierte en uno de los más rentables del mundo.

El incinerador YD es el último diseño para el tratamiento de desechos, incluye desechos médicos, cremación de animales y otros desechos sólidos. Esta calidad de equipo estructural para tipos de sitios, como hospitales, incineradores de desechos hospitalarios, incineradores de desechos hospitalarios en China, tecnología de incineradores de desechos hous hol, cómo solicitar una licencia de incinerador en Sudáfrica, departamento de medio ambiente, agencias de cremación de animales, etc. modelos actualizados con cámara de combustión dual, cámara de combustión mixta y cámara de filtro de humo con líneas refractarias, y la temperatura de la cámara de combustión hasta 1200 ° C.

Artículos / Modelo YD-30 YD-50 YD-100 YD-150
Tasa de combustión (kg / hora) 30 kg / hora 50 kgs / Hr. 100 kgs / Hr. 150 kgs / Hr.
Capacidad de alimentación (kgs) 60 kilogramos 150 kilogramos 200 kilogramos 300 kilogramos
Peso del equipo 2300 kilogramos 4000 kilogramos 4300 kilogramos 7000 kilogramos
Cámara primaria (litros) 360 900 1200 1500
Cámara secundaria (litros) 200 200 500 500
Dimensiones externas (cm) 145x90x175 200 x 160 x 230 220x180x360 240x170x380
Dimensiones internas (cm) 100 x 60 x 60 120 x 90 x 85 130x100x90 150x100x96
Tanque de aceite (litros) 200 300 300 500
Apertura de la puerta (cm) 48 x 60 62 x 80 55 x 80 59 x 81
Chimenea (M) 5 5 10 10
Tipo de chimenea Acero inoxidable Acero inoxidable Acero inoxidable Acero inoxidable
Cámara secundaria SÍ SÍ SÍ SÍ
Cámara de mezcla de combustión SÍ SÍ SÍ SÍ
Cámara de filtro de humo SÍ SÍ SÍ SÍ
Combustible de combustión Gas de petróleo Gas de petróleo Gas de petróleo Gas de petróleo
Tiempo de residencia 2,0 seg. 2,0 seg. 2,0 seg. 2,0 seg.
Monitoreo de temperatura SÍ SÍ SÍ SÍ

BROCHURES DE DÉCHETS et LISTE DES MATÉRIAUX CONTAMINÉS

1 brûleur 30 = KG brûlure / h et il doit également avoir un épurateur.

Le brûleur 2 devrait avoir un déchiqueteur en plastique électrique pour couper le récipient en verre, surange de médicament.

3 Le brûleur doit avoir un Clave de voiture électrique ou un micro-ondes pour une infection indépendante avec le brûleur.
4 L’incinérateur doit avoir des chambres doubles initialement La chambre doit fournir un niveau de température de 800 ° C ainsi qu’une chambre supplémentaire fonctionnant à un niveau de température de 1200 ° C.
5 L’incinérateur à l’extérieur doit avoir une spécification indiquant le niveau de température interne de l’incinérateur.
6 Le brûleur doit fonctionner dans 2 systèmes électriques et aussi de carburant expliquer dans quel type de travail de carburant.
Notez que nous voulons que cela fonctionne à l’essence et aussi à l’électricité.Pour une petite tâche d’abattoir de porcs au Vietnam, nous recherchons un.
solution pour ruiner en toute sécurité les articles pour animaux de compagnie non comestibles et confisqués.

Comme les porcs abattus sont consommés à plus de 90% (des sabots à.
tête, sang, etc.) le volume de déchets est également assez petit.
abattoirs avec jusqu’à 100 porcs abattus chaque jour.

Bien que l’utilisation de farine de viande et d’os ne soit pas interdite au Vietnam, le.
de petites quantités de déchets ne semblent pas justifier le versement d’un.
système d’équarrissage, pas aussi d’un fourneau discontinu, donc l’incinération semble être.
la meilleure option.

Je souhaite obtenir encore plus de détails technologiques, par exemple l’utilisation du gaz pour.
flambant 100/200 kg d’articles animaux par jour ainsi que le FOB.
coût de l’unité Les types de déchets à traiter sont (d’après BROCHURE EUROPÉENNE DES DÉCHETS ET LISTE DE CONTRÔLE DES MATIÈRES CONTAMINÉES, 2002):

18 01 01 objets tranchants (autres que 18 01 03)

18 01 02 composants corporels et organes, y compris les poches de sang et également les entretiens de sang (autres que 18 01 03)

18 01 03 * déchets dont la collecte et également l’élimination subissent des besoins particuliers afin d’éviter l’infection

18 01 04 déchets dont la collecte et l’élimination ne sont pas soumises à des exigences uniques afin de se protéger contre les infections (par exemple, pansements, plâtre, linge, vêtements jetables, couches pour bébés)

18 01 06 * produits chimiques contenant ou consistant en des composés dangereux

18 01 07 produits chimiques autres que ceux mentionnés au 18 01 06

18 01 08 * médicaments cytotoxiques et cytostatiques

18 01 09 médicaments en dehors de ceux évoqués au 18 01 08

18 01 10 * déchets d’amalgame de soins dentaires

установка для сжигания медицинских отходов для продажи

Тип отходов: медицинские отходы
Плотность отходов: от 125 до 350 кг / м3
Теплотворная способность отходов: 4000 ккал / кг.
Содержание влаги: 10-25%
Расчетный остаток золы: 5-10%
Номинальная производительность: загрузка партии 50 кг / час
Вторичная камера: 2 [электронная почта защищена] ? C
Окружающая среда: NEMA ACT (EMCA) 1999 г., Правила обращения с отходами, 2006 г.
Первичная камера сгорания:
Первичная камера сгорания – это основная конструкция инсинератора, изготовленная из листовой мягкой стали и усиленная прокатанными стальными профилями.

Он переносится с уровня пола на прочной стальной опорной раме. Изнутри оболочка облицована изоляцией из силиката кальция и горячей лицевой панелью из сверхпрочной кирпичной кладки или высокопрочного литого бетона.

Первичная камера сгорания должна обеспечивать минимальную температуру на выходе не менее 850 ° C.
Один инсинератор с ручной загрузкой, включающий:
Дверца ручной загрузки
Горизонтальный сплошной под, первичная камера сгорания с огнеупорной футеровкой. Прибл. размеры 800×2100мм (DxL)
Полноразмерная дверца для сыпучих грузов / золоудаления
1 дизельная запальная горелка – с контролем температуры
1 вентилятор подачи воздуха для горения и система распределения, автоматическое управление
Вторичная камера сгорания большой мощности с временем пребывания не менее 2 секунд при> 850 ° C
1 форсажная камера, работающая на дизельном топливе – с контролем температуры
Панель управления – автоматический режим
Индикация температуры первичной и вторичной камер 0-1200 ° C
Фланцевый дымоход с огнеупорной футеровкой на высоту 10 м над уровнем земли
Примечание: вторичная камера сгорания должна обеспечивать, чтобы температура газа, измеренная относительно внутренней стенки вторичной камеры, а не в зоне пламени, была не менее 1100 ° C.

Пропускная способность: 50 кг / час при номинальной теплотворной способности 4000 ккал / кг и средней объемной плотности 120 кг / м3 для обычных отходов и 160 кг / м3 для медицинских отходов.
Зола: количество отходов будет уменьшено на 90 ~ 95%, чтобы оставить 10-5% золы.
Стандарты качества / окружающей среды: NEMA ACT (EMCA) 1999, BS3316
Период работы: расчетная суточная продолжительность работы 8 часов
Максимальный период работы: 12 часов
Камера: должна быть футерована огнеупором в соответствии со следующим стандартом;
Подок и нижняя часть стен камеры
Материал горячей поверхности:
Огнеупорный кирпич сверхмощный
Предел непрерывной работы 1500 ° C
Толщина: 100 мм
Теплопроводность: 1,3 Вт / мК
Изоляция:
Силикат кальция
Предел непрерывной работы 1000 ° C
Толщина: 25 мм
Теплопроводность: 0,095 Вт / мК
Дымоход / дымоход: Должен быть изготовлен из низкоуглеродистой стали с огнеупорной футеровкой или из высококачественной нержавеющей стали с воздушным охлаждением.
Высота дымохода / дымовой трубы должна быть не менее 10 м над уровнем земли.
Розжиговые горелки: полностью укомплектованные масляные горелки, в комплекте с электрическими устройствами розжига и контроля пламени, подключены к постоянно работающему вентилятору и укомплектованы всеми клапанами, вентилятором и двигателем.
Максимальная мощность: не менее 450 кВт / час
Горелка: предназначена для включения / выключения
Максимальное потребление: не менее 6 литров / час.
Среднее потребление: не менее 3 л / час.
Форсаж:
полностью упакованный тип масла, в комплекте с электрическими устройствами розжига и контроля пламени, подключенный к постоянно работающему вентилятору и укомплектованный всеми клапанами, вентилятором и двигателем.
Максимальная мощность: не менее 450 кВт / час
Горелка: предназначена для включения / выключения
Максимальное потребление: не менее 9 литров / час.
Среднее потребление: не менее 4,5 л / час
Очистка дымовых газов: должен быть установлен очиститель твердых частиц (скрубберы).
Электроснабжение: однофазное: 220/240 В переменного тока; 50/60 Гц

Документация:
установка для сжигания медицинских отходов на продажу Руководство по эксплуатации: 2 комплекта
Руководство по обслуживанию / ремонту: 2 комплекта
Сертификация: сертификация NEMA (или другая признанная)
Возможность обслуживания оборудования: агент / поставщик должен иметь соответствующие помещения, запасные части, расходные материалы и квалифицированный квалифицированный технический персонал.
Обучение: Агент должен провести двухдневное обучение инсинераторов после установки и ввода оборудования в эксплуатацию.

Агент должен провести двухдневный тренинг по эксплуатации и техническому обслуживанию для инженерно-биомедицинского персонала после установки и ввода оборудования в эксплуатацию.

การเปลี่ยนวัสดุกรองของแผ่นกรองม้วนอัตโนมัติใช้เวลานานเท่าใด

22 พฤษภาคม 2019 Industry News 456 views

ใช้เวลานานเท่าใดในการเปลี่ยนวัสดุกรองของตัวกรองไขลานอัตโนมัติของ Nanjing Yixi?

  วัสดุกรองของ ตัวกรองแบบม้วนอัตโนมัติจะเปลี่ยนนานแค่ไหน?

1. แตกต่างกันไปในแต่ละภูมิภาค มลพิษในภาคเหนือรุนแรงกว่าภาคใต้ เนื่องจากภาคเหนือมีพืชพันธุ์น้อย และหากมลพิษรุนแรง ความเร็วในการเปลี่ยนไส้กรองจะเร็วขึ้น ตัวอย่างเช่น ในฤดูหนาวในฉือเจียจวง วัสดุกรองจะถูกพันสัปดาห์ละครั้ง ผ้าฝ้ายกรองที่มีความสูง 3 เมตรและความยาว 15 เมตรจะต้องเปลี่ยนในมากกว่าหนึ่งเดือน ในขณะที่ในกวางโจว จะทำแผลแค่เดือนละครั้งใช้ได้นานกว่าครึ่งปี แตกต่างกันอย่างมาก

2. แตกต่างกันไปตามฤดูกาล มลภาวะในฤดูหนาวรุนแรงกว่าในฤดูร้อน ในฤดูร้อน เนื่องจากมีฝนตกชุกและมีปริมาณไอน้ำในอากาศมากกว่าในฤดูหนาว ฝุ่นจำนวนมากจึงถูกส่งกลับสู่พื้นดิน และคุณภาพอากาศก็ดีขึ้น ยิ่งไปกว่านั้น ฤดูร้อนไม่หนาวและแห้งแล้งเหมือนมรสุมฤดูหนาว และมีฝุ่นน้อย ดังนั้นวัสดุกรองฤดูร้อนจึงสามารถใช้งานได้นานขึ้น

3. สภาพแวดล้อมในบางพื้นที่ก็จะได้รับผลกระทบไปด้วย ตัวอย่างเช่น มีองค์กรโลหกรรมถ่านหินในท้องถิ่นขนาดใหญ่หรือโครงการก่อสร้างโยธาระยะยาว ซึ่งจะทำให้ค่า PM2.5 สูงเกินไป และมลพิษหลักในฝุ่นในอากาศจะเพิ่มขึ้น ด้วยวิธีนี้ เวลาที่ใช้โดยแผ่นกรองฝ้ายจะแตกต่างกันตามธรรมชาติระหว่างสถานที่สองแห่งที่อยู่ใกล้เคียง

4. นอกจากนี้ เวลาในการเปลี่ยนแผ่นกรองยังสัมพันธ์กับค่าที่กำหนดโดยสวิตช์ความดันส่วนต่าง ค่าเริ่มต้นจากโรงงานของบริษัทของเราคือ 100~150Pa และผ้าฝ้ายกรอง 100Pa จะสั้นกว่า 150Pa ซึ่งควรปรับตามความต้องการของเจ้าของ

มีการระบุไว้เสมอว่าคำถามเกี่ยวกับความถี่ของวัสดุกรองของตัวกรองอากาศลูกกลิ้งชัตเตอร์ที่บุคลากรทางธุรกิจมักพบนั้นแตกต่างกันไปในแต่ละลูกค้า ภูมิภาค ภูมิภาค และสภาพแวดล้อมการใช้งาน ไม่สามารถสรุปได้ หากคุณต้องการเรียนรู้เพิ่มเติม เกี่ยวกับการกรองชัตเตอร์ลูกกลิ้งอัตโนมัติ สำหรับความรู้เกี่ยวกับสื่อกรอง โปรดติดต่อพนักงานขายของ Nanjing Yixiou

URL เนื้อหาเพิ่มเติม: www.ecolead.cn โทร: 025-57138032

incinerator china

oElectro-ventilator distributing the secondary air, the regulation of the air flow being carried out by valves and

following the control of the automatic cycle.

Controls and regulations:

Control box watertight to dust, including:

 

A switch circuit breaker for each engine (ventilators and burners).

A timer with adjustable temporization for the regulation of each burner.

A regulator with digital watching for the temperature of combustion.

A regulator with digital watching for the temperature of post combustion.

Electric box

The incinerator shall be suitable to completely burn the sludge without the need to mix or blend it with any other

fuel. The incinerator shall be designed to meet the latest design criteria for minimization of smoke emission. The

incinerator shall also be used to burn both liquid and solid wastes simultaneously.

Supply, installation and testing of medical waste incinerator with a capacity of 75 kilograms / hour, operated by LPG

and including all accessories with chimney in accordance with the technical specifications and public health

regulations

(MEDICAL INCINERATORS)

Heavy Duty Steel Casing With Heat Retention Fiber

Design Air/ Gas Floe Access to Provide 2-Seconds Gas Retention Time

1x Diesel Fired ignition Burner with Thermostatic On-Off Temperature Control

Particulate/ Gas Combustion at 850C And Above

Zero Smoke or Odor Emissions At 850C And Above

 

 

Chimney

 

Stainless Steel Chimney Section (1 Meter)

Stainless Steel Stack Cap