Blog

animal incinerators

The incinerator shall be equipped with a Diesel oil tank that will be supplied with DO from our DO tank located in the

power station. The tank shall be equipped with level switches and appropriate solenoid valves for automatic filling of

the tank. The tank shall also be equipped with a magnetic level indicator, level switches and appropriate drain valves,

separate overflow and vent pipes.

Oil-fired multi-stage waste incinerator of pyrolytic type shall be installed complete with interconnecting flue gas

ductwork between the incinerator and the chimney outlet.

 

The unit shall be manufactured in accordance with the latest ASME code, BS and DIN standards.

 

The waste disposal shall be environmentally acceptable and the incineration emission shall comply with the admissible

emission limits (international EC-Standards). The visibility of flue gases shall not exceed one Ringelmann. The waste

shall be completely burnt and the content of un burnt organic matter of the ash shall not exceed 3%.

 

The unit shall allow for a minimum of 2.0 seconds retention time.

 

1.2        QUALITY ASSURANCE:

 

  1. Coordinate the entire assembly of incinerator, stack, controls, fuel supply.

 

  1. Provide written certification that the entire assembly has been coordinated to achieve the required performance

and to provide the required features.

 

  1. Equipment, installation, and operation shall conform to NFPA 82. Where conflicts exist between NFPA 82 and this

specification, this specification shall govern.

 

1.3        SUBMITTALS:

 

  1. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES.

 

  1. Incinerator:

 

  1. Arrangement, description of construction, and outline drawings of incinerator and accessories showing

clearances and dimensions.

 

  1. Predicted performance including burn time based on waste composition specified.

 

  1. Calculation of secondary chamber retention time.

дистрибьютор больничных установок для сжигания отходов

CSH Wellness Facility, (Калабар, Нигерия)

Сжигатель медицинских отходов, предназначенный для удаления примерно 0,5 кубических метров патологических или заразных отходов.

Горелка должна иметь двойную камеру сгорания, а также контролировать количество диоксина, а также различных других газов, отводимых без повреждений.

Приблизительные размеры, общие для дистрибьюторов, тем не менее, чтобы быть портативными, насколько это практично.
Создан для избавления от предметов одноразового использования, которые могут быть уничтожены на месте. Эти отходы включают дополнительно загрязненный, а также переносимый «красный мешок». Хирургические повязки, пластиковые устройства для оценки, а также другие отходы.
Быстрая, полная и надежная утилизация отходов.
Двухкамерное горение, камеры дополнительно экранированы и футерованы жаропрочным огнеупором. Программируемые электронные регуляторы уровня температуры, индикаторы уровня температуры, а также регистратор заряда. Регулирующий контроль газа, а также воздуха снижает потребление газа.
Минимальная установка вместе со временем запуска.
Слой алюминизированной стали, облицованный огнеупором, а также огнеупорным кирпичом. Дисплеи-рекордеры в дополнение к различным другим дополнительным устройствам обязательно должны быть предоставлены.
Биллинговая система :.
– – Вертикальная дверца на замке.
– – Платежная система с пневмоприводом или гидроцилиндром.
– – Автомобиль закрыл дверь после зарядки.
– – Температура в первичной и второй камерах предусмотрена, а также зафиксирована лентой (опция).
Стоимость биллинга :.
– – Около 100 кг отходов на человеческий ресурс или отходы из красных мешков с оценкой 2200 БТЕ на кг.
Газ: – Газ.
Емкость (кубические метры): 1,65 м3 или больше.
Пропускная способность: 100 кг в час.
Возможность дополнительной камеры (CubicMtr): 3,88 и даже больше.
Размер (мм): 1880 или лучше.
Размер (мм): 1280 или лучше.
Высота вкл. Дымоход (мм): 7700 или лучше.
Проем ясеневой двери (мм): 475 × 900 или намного лучше.
Мин. Рабочая температура: 90 градусов по Цельсию.
Макс, рабочая температура: 1350 градусов по Цельсию.
Время пребывания во Второй палате: 2 сек.
Отслеживание уровня температуры: как для основных, так и для дополнительных камер.
Система упаковки Ручная / полуавтоматическая.
Эффективность повреждения отходов:>> 90% по весу.
Фильтр: Многочисленные или керамические различные другие эквивалентные фильтры для снижения попадания вредных примесей из воздуха, твердых частиц, окиси углерода, диоксина / фурана прямо в окружающую среду.
Система удаления золы: ручная / полуавтоматическая.
– Гражданские функции. – Тележки для сбора мусора

Итого / краска: -.
Двухслойная современная эпоксидная краска высшего качества премиум-класса.
Установленная мощность (электрическое напряжение): 440 В / 50 Гц.
Оборудование для мониторинга отходов должно иметь ;.
Мобильная упаковочная тележка: 06 No’s– – Для транспортировки отходов медицинского центра из палаты в место / место обогрева, открывается сверху.
МОБИЛЬНЫЕ МУСОРЫ: 06 No’s- Изготовлены из пластика, синего цвета с крышкой.
Пластиковые пакеты: 2000 штук красного, а также желтого оттенка.
Прочные пары для защиты рук: для персонала, работающего с отходами-06 пар.
Длинные пары обуви: Для обращения с отходами– – 06 пар.

CSH Health And Wellness Facility, (Калабар, Нигерия)

Обогреватель медицинских отходов, способный удалить около 0,5 кубических метров патологических или передаваемых отходов.

Tool Dimension : Burning Rate : 60-80 kg/hr Pyrolytic Double Chamber Incinerator

Items/Model

TS100( PLC)

Photo

Concept

Waste Incineration Treatment

Burn Price

60-80 kg/hour

Control Mode

PLC( Programmable Reasoning Controller Incinerator)

Combustion Chamber

1200L

Interior Measurements

120x100x100cm

Second Chamber

600L

Smoke Filter Chamber

Yes( Dry Scrubber)

Feed Setting

Manual

Voltage

220V

Oil Consumption (kg/hour)

Typical 20.4

Gas Intake (m3/hour)

***

Temperature Monitor

Digital Present

Temperature Level Defense

Yes

Oil Container

1100L

Feed Door

80x60cm

Smokeshaft

10Meter

Chimney Kind

Stainless Steel

1st. Chamber Temperature

800 ℃– -1000 ℃

second. Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

6000kg

External Dimensions

260x150x180cm


The requirement is for a pyrolytic double-chamber incinerator. The incinerator shall be capable of using diesel 
fuel as a supplemental fuel oil.
It should incorporate an Air Pollution Control (APC) System suitable for basic emission control.
The proposed incinerators shall be appropriate for critical harsh environmental conditions, suitable for rapid 
deployment, and different climate zones (e.g. desert, tropical country, mountain, etc.) in which there are several 
variations of the relative natural forces (e.g. temperature, humidity, wind, etc.) for a minimum period of 10 years 
if the specified maintenance schedule is followed.
The incinerators should be supplied assembled, whenever possible, and all parts and components should be 
packaged on pallets in order to be transported via road, air (via helicopters or air-cargoes, e.g. MI8 or C130) 
and via sea in a 20’ ISO sea shipping containers.

HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-21

Calentador de residuos biomédicos, 10-15 KG.

El primero es un pequeño
Incinerador de 20 kg / hr para un hospital pequeño-mediano, y el
el segundo es un incinerador de 500 kg por hora para una empresa que planea
servicio de incineración en Lahore Tasa de combustión:> 200 kg por hora
Consumo medio de combustible: ~ 29 kg por hora (o menos)
Retención de gas en la cámara secundaria: 2 segundos
Monitoreo de temperatura: sí
Residuo de cenizas promedio: 3% Las prácticas de manejo de desechos médicos aquí son deficientes. Me he encontrado con sus unidades de gestión de residuos médicos a pequeña escala Incinerador de residuos biomédicos, 10-15 kg
Fabricante:
Marca:
Tipo / Modelo:
País de origen:
Descripción de la función
El Incinerador de Residuos Biomédicos se utiliza para la Incineración de cada tipo de Residuos Biomédicos.
La eliminación de dichos desechos biomédicos es muy importante, ya que es un desperdicio peligroso para
vida humana, y solo es posible con un incinerador perfecto.
Requerimientos operacionales
Será operado en modo manual y automático.
La eficiencia de combustión (CE) será al menos del 99,00%.
La eficiencia de combustión se calcula de la siguiente manera:
CE = __% CO2______ x 100
% CO2 +% CO
Estándares de emisión: se prefieren tasas de emisión más bajas.
Parámetros Concentración en mg / Nm3 (corrección de CO2 al 12%
Polvo total máximo 30 mg / m3
Dióxido de azufre máximo 200 mg / m3
Dióxido de nitrógeno máximo 400 mg / m3
Carbono máximo 100 mg / m3
Monóxido
La altura mínima de la pila será de 30 metros sobre el suelo.
Los compuestos orgánicos volátiles en las cenizas no deben superar el 0,01%.
Configuración del sistema
Incinerador de Residuos Biomédicos, unidad completa.
Especificaciones técnicas
Incinerador:
Debe ser un incinerador eléctrico o diésel o aire controlado y pirolítico.
Tipo de Residuos: Residuos Biomédicos
Tendrá una capacidad de combustión de 10 a 15 kg / h.
Combustible: diesel
Quemador: Quemadores monobloque totalmente automáticos.
Temperatura: Cámara primaria 800 ± 50 oC, Cámara secundaria 1050 ± 50 oC.
Tipo de Residuos: Residuos biomédicos con un contenido de humedad de hasta el 85%.
Eficiencia de destrucción: 99%.
Deberá tener una pantalla digital separada de temperatura para ambas cámaras.
Deberá tener la posibilidad de medir las temperaturas de la cámara primaria y secundaria utilizando
termo acoplador.
El tiempo de residencia del gas de la cámara secundaria será como mínimo de 1 segundo a 1050 oC.
Cámara primaria:
Tipo: Hogar Sólido Estático
Material de construcción: acero dulce, 5 mm de espesor
Espesor refractario: aproximadamente 115 mm de espesor
Material: ladrillos refractarios que cumplen con los estándares internacionales.
Resistencia a la temperatura: 1400 oC
Espesor del aislamiento: aproximadamente 115 mm de espesor
Material: ladrillos aislantes que cumplen con los estándares internacionales.
Carga de residuos: Carga de residuos manual y automática.
Eliminación de cenizas: manual / automática
Cámara secundaria:
Tipo: Hogar Sólido Estático
Material de construcción: acero dulce, 5 mm de espesor
Espesor refractario: aproximadamente 115 mm de espesor
Material: ladrillos refractarios que cumplen con los estándares internacionales.
Resistencia a la temperatura: 1400 oC.
Espesor del aislamiento: aproximadamente 115 mm
Material: ladrillos aislantes que cumplen con los estándares internacionales.
Carga de residuos: Carga de residuos manual y automática.
Pila de emergencia:
Tipo: cilíndrico, montado en la parte superior sobre eyector venturi.
Material de construcción: acero dulce, 3 mm de espesor.
Refractario: calcinable de 75 mm de espesor.
Aislamiento: Moldeable de 25 mm de espesor.
Bebida refrescante:
Material de construcción del cuerpo exterior: Refractario de acero dulce revestido desde el interior.
Tendrá sistema de circulación de agua con bomba centrífuga.
Deberá reducir la temperatura de los gases de combustión antes del lavador venturi.
Deberá proporcionar un motor de bomba de capacidad adecuada.
Dispositivo de control de la contaminación del aire – Depurador Venturi
Tipo: tipo chorro de alta presión.
MOC: Acero inoxidable – 316L.
Temperatura a la salida: 78-80 oC
Medios de limpieza: agua con un 5% de cáustico
Bomba de recirculación para depurador Venturi
Tipo: Centrífuga
Aplicación: PP / SS
Tubería: PPR
Separador de gotas y tanque de recirculación (integral)
Tipo: Ciclónico
Aplicación: Para separar las gotas de agua de los gases de combustión.
Material de construcción: acero dulce forrado con caucho de 3 mm de espesor
Ventilador de identificación:
Tipo: centrífugo de alta presión
Material de construcción: acero inoxidable 304, impulsor y fundición revestida de caucho de acero dulce
Unidad: Bel
Ventilador de combustión:
Tipo: Centrífuga
Modulación: control de amortiguador manual
Material de construcción: acero dulce
Unidad: unidad directa
Quemadores:
No. de quemadores: 2 No. (1 No. en la cámara principal y 1 No. en la cámara secundaria)
Tipo: Monobloque completamente automático
Combustible: diesel
Tanque de almacenamiento de aceite combustible:
Deberá proporcionar la capacidad adecuada del tanque de almacenamiento de aceite.
Material de construcción: acero dulce.
Deberá haber allí una instalación para la verificación visual del combustible.
Contará con sistema de control del consumo de diesel.
Viene con indicador de nivel de aceite diesel, tubería con válvulas y válvula NR.
Panel de control:
Tipo: Panel de control basado en PLC manual y automatizado con impresora y dispositivo de grabación.
Material de construcción: hoja CRCA
Tendrá controlador de temperatura digital.
Acabado de pintura lavable con recubrimiento de polvo epoxi.
Tendrá sistema de alarma audiovisual.
Chimenea de 30 metros de altura:
Material de construcción: acero dulce
Será de tipo autoportante.
La altura será de 30 metros desde el nivel del suelo.
Pintura La chimenea está pintada externamente con dos capas de pintura de aluminio resistente al calor.
Proporcionará escalera hasta la cima.
Tendrá un forro de goma de 3 mm de espesor desde el interior para protección.
Viene con lámpara de aviación, pararrayos, pila, drenaje, plataforma de inspección, muestreo
Puerto.
Certificado de consumo:
El postor deberá presentar el consumo de diesel para una operación diaria de 6 horas.
Llavero:
Los precios ofrecidos incluirán todas las obras civiles, los requisitos eléctricos, incluido el cableado y
interruptores necesarios para la instalación y puesta en servicio del equipo.
El licitante deberá presentar planos detallados, diseño y plano de distribución de la obra civil.
El postor deberá presentar los detalles de BOQ de obra civil y eléctrica.
Accesorios, repuestos y consumibles
Todos los accesorios, consumibles y piezas estándar necesarios para operar el equipo, incluidos
todas las herramientas estándar y materiales de limpieza y lubricación, que se incluirán en la oferta. Licitadores
debe especificar la cantidad de cada artículo incluido en su oferta (incluidos los artículos no especificados
sobre).
Entorno operativo
El sistema ofrecido estará diseñado para almacenar y operar normalmente bajo las condiciones de
el país del comprador. Las condiciones incluyen suministro de energía, clima, temperatura,
Humedad, etc.
Fuente de alimentación: 220-240 VAC, 50Hz monofásico / 400-420 VAC, 50Hz trifásico como
apropiado equipado con enchufe apropiado. El cable de alimentación debe tener al menos 3 metros de longitud.
Normas y requisitos de seguridad
Deberá contar con la aprobación de la “Junta de Control de la Contaminación” del país del comprador.
Se deben realizar todas las aprobaciones obligatorias necesarias para la instalación y el funcionamiento del incinerador.
por el postor.
Debe presentar ISO 9001 Y
Certificado de producto aprobado por CE o USFDA.
Entrenamiento de usuario
Debe proporcionar capacitación al usuario (incluido cómo usar y mantener el equipo).
Garantía
Garantía integral por 2 años después de la aceptación.
Servicio de mantenimiento durante el período de garantía
Durante el período de garantía, el proveedor debe garantizar el mantenimiento preventivo junto con
mantenimiento correctivo / de averías cuando sea necesario.
Instalación y puesta en marcha
El licitador debe hacer arreglos para que el equipo sea instalado y comisionado por un certificado o
Personal calificado; todos los requisitos previos para la instalación se comunicarán al comprador en
avance, en detalle.
Documentación
Manual de usuario (operativo) en inglés.
Manual de servicio (técnico / mantenimiento) en inglés
Lista de repuestos y accesorios importantes con su número de pieza y su coste.
Certificado de calibración e inspección de fábrica.

Waste Incineration Therapy Style TS75( PLC).


Average 50-100 kg/hour Burn Rate

Items/Model

TS75( PLC)

Principle

Waste Incineration Therapy

Burn Cost

Average 50-100 kg/hour

Feed Ability

Ordinary 200-300 kg/feeding

Control Mode

PLC( Programmable Reasoning Controller Burner)

Face Oil Paint

800 ℃

Combustion Chamber

768 Liters (0.768 M3)

Inner Measurements

1200x800x800mm

Added Chamber

384 Liters (0.384 M3)

Smoke Filter Chamber

Yes

Feed Setting

Manual

Voltage

210/240V 50Hz 1P

Power

1.3 Kw

Oil Intake (kg/hour)

Typical 20.4( D.O)

Thermal ability( kw/hour)

166-332

Gas Consumption (m3/hour)

***

Temperature Level Degree Monitor

Digital Show

Oil Tank

3000L

Feed Door

60x50cm

Smokeshaft

10Meter

Chimney Kind

Stainless-steel

1st. Chamber Temperature

800 ℃–– – – -1000 ℃

2nd. Chamber Temperature Level Degree

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

7500kg

Outside Dimensions

260x160x250cm( without smokeshaft)

We offer singular burning chamber, dual combustion chambers, 3 burning chambers and multi-combustion

chambers waste incinerators for lab, center, clinical facility, clinical facility, hygiene specialist waste devastation with scientific

non reusable, organic waste, clinical plastic waste, contaminated materials, red bag waste, needle disposal, gauze and additionally plasters,

secured sharp containers, pathological waste, trace-chemotherapeutic wastes, and so forth.

Our collection of incinerators provide for little to big range family pet cremation relevant business, such as fowl ranches, livestock

ranches, lamb ranches, pig ranches, stables, kennels, screening laboratory, catteries, pet dog crematoriums. Vendor clear up rate for incinerator consumer,

The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber again to 

make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection.

System solutions for medical waste environmental, including waste incineration, smoke emission treatment, high-temperature 

sterilization, ultraviolet sterilization lamp, waste shredder, needle destroyer, medical waste package, sharp containers, etc.

The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation 

business owner all over the world.

The containerized mobile incinerator mounted in ISO container before leave factory, pre-installation, no incineration house 

build construction, movable by truck and ultraviolet lamp sterilization inside.

We are growing brand for environmental protection field, and market share with most of 

Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental 

organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. 

We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan.

supply clinical burner, medical center burner, family pet burners, hog burners, pet dog cremation tools, small incinerator,

pet dog burner, pet dog burner, mobile burner, little pet dog burner, transmittable waste pyrolysis tool, lab

heater.

burner.


Plus Size Burning Price : 150-200 kg/hr Solid Waste Devices Primary and Second Combustion Chamber Burner

Items/Model

TS500( PLC)

Picture

Concept

Waste Incineration Treatment

Burn Price

150-200 kg/hour

Control Setting

PLC( Programmable Logic Controller Burner)

Combustion Chamber

2700L

Interior Dimensions

190x120x120cm

Second Chamber

1300L

Smoke Filter Chamber

Yes

Feed Mode

Handbook

Voltage

220V

Oil Intake (kg/hour)

Ordinary 28

Gas Usage (m3/hour)

***

Temperature Display

Digital Display

Temperature Security

Yes

Oil Tank

1400L

Feed Door

90x80cm

Chimney

10Meter

Smokeshaft Kind

Stainless Steel

1st. Chamber Temperature

800 ℃– -1000 ℃

2nd. Chamber Temperature

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

15000kg

Outside Measurements

400x210x300cm( without chimney)

The air supply should be controlled efficiently;
Flame contact with all the gases should be achieved;
The minimum combustion temperature of the primary chamber should not be less than 850°C;
The primary combustion chamber should be equipped with a means to provide supplemental liquid fuel supply.
The primary chamber should be cold face refractory lining, with a minimum thickness 100 mm.
The following conditions should be met in the secondary combustion chamber:
The air supply should be controlled efficiently;
Flame contact with all the gases should be achieved;
The size of the secondary chamber should be properly designed to ensure that the gas retention time should not be less than 2 seconds;
The secondary chamber should be cold face refractory lining, with a minimum thickness 100 mm;
The chamber should incorporate an integrated combustion burner air fans with automatically controlled distribution;
The gas temperature, as measured against the inside wall in the secondary chamber (not in the flame zone) should not be less than 1,100°C;

HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-21

О нас

Нанкин Клевер Медицинские Технологии Лтд. местный в городе Нанкин, Китай, который находится недалеко от порта Шанхай.

Мы являемся производителем установок для сжигания отходов в Китае. Мы производим установки для сжигания медицинских отходов, оборудование для кремации домашних животных и другие установки для сжигания твердых отходов. Скорость горения от 10 кг, 20 кг, 30 кг, 50 кг, 100 кг, 150 кг, 200 кг, 300 кг, 500 кг, 600 кг в час, ежедневная мощность обработки до 6 тонн в день.

Все установки для сжигания отходов Clover производят двойные камеры сгорания, оригинальные масляные или газовые горелки Италии. Мы используем дымоход из нержавеющей стали для нашей мусоросжигательной печи с длительным сроком службы. Для чистых выбросов мы поставляем сухой или мокрый скруббер с передовой технологией.

Рынок мусоросжигательных заводов и клиенты находятся во всем мире, и местные дилеры обеспечивают прямое обслуживание.

Nanjing Clover Medical Technology Co., Ltd. – ведущий производитель мусоросжигательных установок в Китае. Все серии включали мощность горения 10 кг в час, 30 кг в час, 50 кг в час, 100 кг в час, 150 кг в час, 300 кг в час, 500 кг в час. До сих пор все модели продаются по всему миру и имеют хорошие отзывы от конечных потребителей. Медицинский инсинератор YD Model имеет многокамерную камеру сгорания и основной сухой скруббер (камеру дымового фильтра) с разумным бюджетом проекта. Что касается требований к более чистым выбросам, мы принимаем изготовленные на заказ мокрые скрубберы для мусоросжигательной печи, и это также будет нашей следующей работой, сосредоточив внимание на технических выбросах.

Обычная модель мусоросжигательного завода для рынка со скоростью горения от 10 до 500 кг в час, и мы всегда предлагаем клиенту прислать нам свои требуемые детали, такие как отходы, местное топливо и источник питания, время работы мусоросжигательного завода и т. сделаны с другой структурой или размерами.

Мусоросжигательная установка модели YD-100 – это установка для сжигания отходов среднего размера для различных целей: для больничной койки среднего размера менее 500 единиц, для всех домашних животных малого или большого размера (например, собаки аляскинского маламута), для сжигания твердых бытовых отходов в общинах и т. Объем первичной камеры сгорания составляет 1200 литров (1,2 м3) и используется оригинальная итальянская горелка на дизельном топливе или природном газе.

Во всех наших инсинераторах используются дымоходы из нержавеющей стали, а не из стали. Все наши инсинераторы имеют как минимум две камеры сгорания, а не одну камеру. Все топливные горелки из Италии от известных брендов, лучшего качества.

Инсинератор со скоростью горения 300 кг / час пользуется большой популярностью на рынке, потому что эта модель может быть оборудованием для сжигания медицинских отходов для больших больниц, а также очень хороша для обработки других твердых отходов с наименьшими затратами, даже если в камеру сгорания также можно кормить крупных животных. Объем первичной камеры сгорания составляет 2,4 м3, что достаточно для животных обычных размеров. Для транспортировки YD-300 может быть загружен в 40-футовый контейнер высотой 40 футов.

Камера сгорания большого размера – до 4,0 м3, внутренние размеры – 257 x 147 x 108 см с отверстием для загрузочной дверцы 108 x 128 см. Эта модель может быть небольшой мусоросжигательной фабрикой с небольшими бюджетными средствами. Если конечный покупатель использует его на ферме для сжигания животных, таких как корова, лошадь или верблюд, свяжитесь с нами сейчас.

Свяжитесь с нами по электронной почте или по телефону прямо сейчас!

Электронная почта: [электронная почта защищена]
Телефон: + 86-25-84610201

Mobile Cremation Devices

Design

CA-200

Image

Burning Rate

Ordinary 100 kgs/hour

Key Burning Chamber

2000 Liters

Additional Burning Smokeshaft

Yes

Feed Mode

Guidebook

Voltage

220V

Power

3.0 Kw

Fuel Kind

Diesel Oil

Burner

Italy Original

Oil Usage (Diesel Oil)

Typical 53 kg/hour

Interior Dimensions

230 x 100 x 90cm (primary chamber)

External Measurements

290 x 200 x 170cm (key chamber)

Temperature Monitor

Yes

Oil Container Capacity( if oil fuel)

500 Liters

Door Opening

90 x 90cm

Smokeshaft Size

5.0 Meters

Chimney Type

Stainless Steel

Devices Gross Weight

9000 kgs( with container)

Procedure Technical Specifications

Paimary Chamber Temperature

800 ℃–– 1000 ℃

Second Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Burning Efficiency

> 98%

Waste Lower Calorific Power

3000Kcal


Mobile crematorium 
HICLOVER – Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-22

calentadores que pueden cuidar los desechos biomédicos bolsa roja

unidades de calefacción que pueden cuidar los desechos biomédicos (bolsa roja) del laboratorio con nivel 2 en mejora a 3, estudio de investigación de mascotas familiares, así como salud.

Sitio web 1– – – – 4.650 kg de rutina de mes a mes (sugiero que instale 2 calentadores en esta área, ya que es un centro de estudio de investigación clínica en la mejora del uso es realmente alto)

Sitio web 2– – – – 1000Kgs cada mes (esta instalación se ocupa del estudio de investigación de mascotas, pero también tiene desechos de bolsa roja del lado del estudio de investigación, actualmente tienen un sistema de calentamiento de alcohol masivo para animales)

Sitio web 3– – – – 1000 kg cada mes (esta instalación es una instalación de atención médica en el área con desechos biológicos provenientes del trato con las personas)

250kgs per human resources capacity waste incinerator


Burner Design TS250 PLC, Review

This design is small waste incineration tools for little waste result. Construction

is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment. 
Waste feed chamber is 1800Liters (1.8m3, TS250 PLC). Primary & Secondary combustion chambers
and smoke filter chamber. Batch load on the bottom of chamber. Incinerator PLC panel control suit for local operation. 

Key Product Listing per 01 collection

Key Burning Chamber

Extra Combustion Chamber

Smoke Filter Chamber

Incinerator PLC Control Circumstances

Smokeshaft:10.0 Meters

*( upgrade to Stainless-steel, complimentary cost)

Italy oil/gas heater: 02 systems

Oil Container (if oil fuel): 300Liters








Items/Model

TS200( PLC)

Image

Principle

Solid Waste Incineration Therapy

Melt Price

Average 250 kg/hour

Feed Ability

Requirement 350kg/feeding

Control Establishing

PLC( Programmable Logic Controller Burner)

Burning Chamber

1800L

Internal Measurements

150x110x110cm

Second Chamber

750L

Smoke Filter Chamber

Yes

Feed Mode

Handbook

Voltage

220V

Power

0.9 Kw

Oil Intake (kg/hour)

Common 28

Gas Usage (m3/hour)

Typical 33.6

Temperature Level Display

Digital Existing

Temperature Level Degree Security

Yes

Oil Tank

300L

Feed Door

80x60cm

Smokeshaft

10Meter

Smokeshaft Kind

Stainless-steel

1st. Chamber Temperature Level

800 ℃–– – – -1000 ℃

2nd. Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

8500kg

Exterior Dimensions

300x160x190cm

Heater procedure should certainly be Automatic On/Off

Gas: diesel

The supplier need to supply needed details for the very best of the installment

This burner with “PYROLYTIC” burning need to have:

;

・ Refractory concrete:

§. Thickness: ≥ 100 mm

§. Nature: 42% of Al203

・ Guard in coarse panels:

§. Thickness: ≥ 75 mm

・ Nature: Calcium silicate.

* Heater of illumination of waste, with gas, typical mono-bloc casting directing diving flame, lights and additionally safety and security of digital ignition, permanent air circulation, electro-magnetic sluice entry of guideline in addition to isolating valve.

* Plate of burning in Carborundum, staying clear of the taking care of glass along with slags.

A chamber of short article burning of gases

* A heating system of burning of gases,

* A gadget of shot of air making it possible for a total recombustion of gases,

* A device of air inlet of air conditioning of waste gases,

* A sheath of clearing of the gases charred.

* Carcass in solid sheet steel with assistance of web link.

* Structure of the refractory;

・ Refractory concrete:

§ Thickness: ≥ 150 mm

§ Nature: 65% of Al203

・ Protect in rugged panel:

§ Thickness: ≥ 85 mm

Nature: Calcium