représentants chimiques à utiliser:
Solution aqueuse d’heptyl (diméthylhydrazine asymétrique) à 10%,
vapeur d’heptyle (diméthylhydrazine asymétrique) avec une concentration de 0,8 à 1,0 kg / m3,
Traitement de l’eau à l’acide azotique (nitrique) à 10%,
vapeur d’acide azotique (nitrique) avec une emphase allant jusqu’à 1,1 kg / m3;
2. approche de neutralisation: dégénérescence thermique;
C à +1200? C;
5. stress et anxiété à l’entrée: jusqu’à 2 bars;
6. système de contrôle automatisé;
7. les dimensions totales doivent permettre de positionner le dispositif sur une structure de voitures et de camions.
producteurs de radiateurs de déchets cliniques Spécifications générales
Construction de tôles d’acier de 6 mm
11cm 1400 o C L iner réfractaire
Appareils de chauffage à température contrôlée
Ajout de systèmes de chauffage à combustion
Verrouillage des portes de chargement
Porte à cendres séparée
Une 2e seconde à la maison à 1000 o C.
Peinture à base de silicone à 400 ° C.
Système de détection de la température de l’alliage.
Installation de fabrication câblée ainsi que vérifiée.
Capacité-20 kg / ressources humaines.
Chambre primaire-1607 L.
Foyer Area-1: 36 mètres carrés
Deuxième chambre-694 L.
Chauffage principal (huile) -420 000 btu.
Deuxième système de chauffage (mazout) -900,000 btu.
Combustion secondaire-1/6 hp.
Pile d’échappement – 46 cm x 6 m.
Service électrique-220/50.
Système de poids-5.700 kg.
Dimension «D» -152 centimètres.
Élévation du port de tonnes – 60 x 60 centimètres.
Altitude du port des cendres -36 x 36 cm
Blog
china incinerator manufacturer and exporter
Primary Combustion Chamber
Waste Charging Door: Provided with refractory lining with sealing gaskets
Ash Removed Door: Provided with refractory lining with sealing gaskets
Outer Body MOC: Mild Steel, 5mm
Primary Chamber: Stainless Steel
Operating Temperature :800. ± 50◦C
Insulation: Insulation Brick
Heating Elements Type: Kanthal Al Grade
Power Consumption: 75 KW ( Initial Load )
Electrical Supply :3 Phase 440 Volt
Control Panel
MOC: Mild Steel Power Coated
No. of Temp: Controllers : 2 Nos
Details: The Control Panel will be provided with contract as relays , switches , indicators etc . Operative on 3 phase.
I.D.Fan
Type: Centrifugal Type
MOC: Mild Steel
Capacity:2 HP/3Phase
Make of Motor: Kirloskar /Havells/Crompton
Combustion Air Fan
Type: Centrifugal Type
Capacity: 1HP/3Phase
Make of Motor: Kirloskar /Havells/Crompton
حرق النفايات للنفايات
معلومات أساسية.
معلومات إضافية.
وصف المنتج
كيف يمكنك العثور على محرقة معقولة لموقعك المحلي؟
المحرقة ليست من المعدات الرخيصة ، وعمومًا يكون سعر النموذج الصغير حوالي 5000 دولار أمريكي لكل وحدة وسعر النموذج الكبير أكثر من 50 ألف دولار أمريكي لكل وحدة. لذلك ، قبل شراء وحدة حرق واحدة ، عليك توضيح العناصر التالية:
ا ، احرق ماذا؟ المحرقة عبارة عن معدات حرق ، وظيفتها هي نفايات الحريق. إذن ما نوع النفايات التي تريد معالجتها؟
B ، صغير أم كبير؟ هذا وفقًا لإخراج النفايات كل يوم أو حجم النفايات لكل وقت تغذية ، مثل حجم الحيوان.
ج ، الوقود؟ تستخدم المحرقة وقود الزيت أو الغاز ، بشكل عام ، وقود الغاز أرخص من الزيت ومنظف الدخان من طراز الوقود النفطي. لكن بعض المواقع المحلية ليس لديها نظام إمداد بالغاز.
وعناصر التكنولوجيا الأخرى ، مثل الطاقة (220 فولت ، 380 فولت) ، نوع باب تغذية النفايات ، هيكل المحرقة ، إلخ.
محرقة YDC هي أحدث تصميم لمعالجة النفايات ، وتشمل النفايات الطبية وحرق الحيوانات والنفايات الصلبة الأخرى. هذه المعدات ذات جودة هيكلية لأنواع الموقع ، مثل المستشفى ، والمحارق w2e ، والمحارق – المنزل ، والمحارق ، وسلسلة المحارق ، ومرشح دخان المحارق ، ومحارق المستشفيات البيطرية ، وقسم البيئة ، ووكالات حرق الحيوانات ، إلخ. توفر محرقة CLOVER نماذج محدثة بغرفة احتراق مزدوجة وغرفة احتراق مختلطة وغرفة مرشح دخان بخطوط مقاومة للحرارة ودرجة حرارة غرفة الاحتراق تصل إلى 1200 درجة مئوية.
| العناصر | تخصيص | |||
| نموذج YDC | YD-10C / YD-20C / YD-30C / YD-50C | |||
| قائمة المنتجات الرئيسية | غرفة الاحتراق الأولية | |||
| غرفة الاحتراق الثانوية | ||||
| مزيج غرفة الاحتراق | ||||
| غرفة مرشح الدخان | ||||
| حالة التحكم في المحرقة المشتركة | ||||
| مدخنة ستانلس ستيل | ||||
| موقد الزيت / الغاز في إيطاليا: 02 وحدة | ||||
| خزان الزيت (إذا كان زيت الوقود) | ||||
اتصل الآن هاتف: + 86-25-8461 0201
EPA Launches ‘See a Bloom, Give It Room’ High School Video Challenge
 |
Contact: Lisa McClain-Vanderpool, 303-312-6077, [email protected]
EPA Launches ‘See a Bloom, Give It Room’ High School Video Challenge
Students invited to submit videos that raise awareness about harmful algal blooms
DENVER – (Sept. 19, 2019) – Today, the U.S. Environmental Protection Agency (EPA) Regions 7 and 8 announced the launch of the “See a Bloom, Give It Room” High School Video Challenge. The competition, supported by EPA’s Office of Research and Development, is calling for videos from high school students (grades 9-12) that promote public awareness of harmful algal blooms through creative filmmaking.
Students are asked to create public safety videos (under 2 minutes in length) that explain how to spot harmful algal blooms and how people and their pets should be safe around them.
“Harmful algae have emerged as a persistent and challenging human health concern in recreational waters across our region,” said EPA Region 8 Administrator Gregory Sopkin. “We’re asking young and aspiring videographers to help us find creative ways to make people aware of the risks and prevent exposure.”
“Through this challenge, we’re asking high schoolers across our region to be creative, have fun, and be part of the solution,” said EPA Region 7 Administrator Jim Gulliford. “Harmful algal blooms can be dangerous to people and pets participating in recreational activities in the water. Winning video entries from this challenge will help EPA and our state, local and tribal partners inform communities about the risks of harmful algal blooms and how to spot and steer clear of them.”
The contest is open to high school students or teams in EPA Regions 7 and 8: Colorado, Iowa, Kansas, Missouri, Montana, North Dakota, Nebraska, South Dakota, Utah and Wyoming. This includes students in public, private and tribal high schools, and home school programs.
A winner from each state, along with two regional tribal winners, will be selected by judging panels to each receive a $2,000 cash prize. Two grand prize winners will also be selected to receive $4,000 each.
Winning videos will also be highlighted at the EPA Harmful Algal Bloom (HAB) Conference in February; featured on EPA web and social media channels; and used by the Agency and its state environmental partners in HAB safety outreach efforts.
Information about the challenge, helpful HAB video resources, and instructions on how to submit videos can be found at: www.epa.gov/innovation/harmful-algal-bloom-video-challenge.
Submissions are due by 11:00 pm (ET) on January 3, 2020.
Background
Certain environmental conditions in water bodies can intensify algae growth, causing algal blooms. Blooms with the potential to harm human health or aquatic ecosystems are referred to as harmful algal blooms or HABs. In freshwater systems, cyanobacteria (also called blue-green algae) are microorganisms that can produce HABs. Some cyanobacterial HABs, or cyanoHABs, can produce toxins. CyanoHABs and their toxins can harm people, animals, aquatic ecosystems, the economy, drinking water supplies, property values, and recreational activities, including swimming and commercial and recreational fishing.
# # #
Learn more about HABs at: www.epa.gov/cyanohabs
Connect with EPA Region 7 and Region 8 on Facebook: www.facebook.com/eparegion7 and www.facebook.com/eparegion8
Follow us on Twitter: @EPARegion7 and @EPARegion8
If you would rather not receive future communications from Environmental Protection Agency, let us know by clicking here.
Environmental Protection Agency, 1595 Wynkoop St., Denver, CO 80202-1129 United States
Environmental Protection Agency, 1595 Wynkoop St., Denver, CO 80202-1129 United States
Установка для сжигания медицинских отходов (YD-30C)
Базовая информация.
Дополнительная информация.
описание продукта
Мы, Clover Medical Limited, базируемся в материковом Китае. Мы являемся производителем оборудования для защиты окружающей среды и специализируемся на разработке, производстве и продаже систем управления отходами, включая мусоросжигательные установки для больниц, ветеринарных клиник, лабораторий, фермерских хозяйств, бытовых отходов и отходов лагерей и т. Д. Инсинератор Clover Medical, производительностью от 10 кг в час до 500 кг в час. Клеверная печь для сжигания животных, больница с клеверным дном, производитель двухкамерных установок для сжигания клевера, clover co., Ltd, клеверные стимуляторы, клеверный мусоросжигатель, мы также являемся агентом и продаем горелки, в том числе мазутные горелки, мазутные горелки, газовые горелки и двухтопливные горелки. Нефть и газ и др.
Ключевая особенность:
* Все модели с двойной камерой сгорания (Dual camera).
* Высокая температура, длительный срок службы инсинератора.
* Бесплатная или минимальная установка на месте.
* Высокая скорость сжигания до 500 кг в час.
* Дизайн для медицинских отходов и кремации животных.
* Один год гарантии на инсинератор.
| Предметы / Модель | Ярд-10С | Ярд-20С | YD-30C | YD-50C |
| Скорость горения (кг / час) | 10 кг / час. | 20 кг / час. | 30 кг / час. | 50 кг / час. |
| Емкость подачи (кг) | 40 кг | 40 кг | 50 кг | 80 кг |
| Вес оборудования | 1200 кг | 1200 кг | 1800 кг | 2200 кг |
| Первичная камера (литры) | 200 | 200 | 250 | 400 |
| Вторичная камера (литры) | 140 | 140 | 140 | 140 |
| Внешние размеры (см) | 170x140x160 | 170x140x160 | 170x140x190 | 180x160x200 |
| Внутренние размеры (см) | 55x55x65 | 55x55x65 | 55x55x85 | 70x70x85 |
| Масляный бак (литры) | 50 | 100 | 100 | 150 |
| Дверной проем (см) | 38 х 48 | 38 х 48 | 38 х 48 | 45 × 55 |
| Дымоход (M) | 5 | 5 | 5 | 5 |
| Тип дымохода | Нержавеющая сталь | Нержавеющая сталь | Нержавеющая сталь | Нержавеющая сталь |
| Вторичная камера | ДА | ДА | ДА | ДА |
| Камера смешанного сгорания | ДА | ДА | ДА | ДА |
| Камера дымового фильтра | ДА | ДА | ДА | ДА |
| Горючее топливо | Нефтяной газ | Нефтяной газ | Нефтяной газ | Нефтяной газ |
| Время проживания | 2.0 сек. | 2.0 сек. | 2.0 сек. | 2.0 сек. |
| Контроль температуры | ДА | ДА | ДА | ДА |
incinerator manufacturer in china
1. Is the residence time more than 2 seconds?
2. Is the primary and secondary air preheated?
3. Could it be provided as a continuous system?
4. Is there a monitoring system for operational parameter? (temperature)
5. Is there a data logging system?
6. Does it provide for control interventions to adjust waste feed, grate speed, and temperature, volume and distribution
of primary and secondary air?
7. Does it include auxiliary burners?
8. Does it include system that automatically stops waste feeding when combustion parameters are not appropriate?
9. Is it possible to have an automatic bottom ash unloading system?
1. Is the primary and secondary air preheated?
2. Could it be provided as a continuous system?
3. Is there a data logging system?
4. Does it provide for control interventions to adjust waste feed, grate speed, and temperature, volume and distribution
of primary and secondary air?
5. Does it include auxiliary burners?
6. Does it include system that automatically stops waste feeding when combustion parameters are not appropriate?
7. Is it possible to have an automatic bottom ash unloading system?
Incinerator
Rated Capacity: 100/KG/Hr
Type of Design: Double Chambered
Mode of Heating: Heating Elements
fabricants d'incinérateurs portables
Tanque
Capacité minimale: 500L
Provido de estrutura de suporte
Válvulas
Indicador de nível de tanque
Funil
Filtro de impurezas na boca do tanque
comprenant, au minimum, un allumage électronique et tous les verrouillages et dispositifs de sécurité nécessaires pour assurer la sécurité
opération. La chambre et le brûleur doivent être conçus pour maintenir une température de combustion minimale d’au moins
930 à 980 C (1700 à 1800 F), mais ne doit pas dépasser 1150 C (2100 F). Le système d’élimination des cendres comprendra, comme suit:
un minimum, l’enlèvement manuel direct dans un sec
Des filtres à air cyclone doivent être fournis pour éliminer les plus grosses particules. Les séparateurs d’air cyclone peuvent être équipés
ventilateurs motorisés pour augmenter la vitesse des gaz à l’intérieur du cyclone pour améliorer l’efficacité de collecte pour les plus petits
particules.
5.16.2 INCINÉRATEURS DE DÉCHETS MÉDICAUX
Les incinérateurs de déchets médicaux doivent être spécialement conçus par le fabricant pour éliminer tous les déchets médicaux. Tout
les unités doivent être conçues pour 8 heures
par jour de fonctionnement continu et être évalué en quantité par heure (c.-à-d. kg / h ou lb / h).
Le chargement de l’incinérateur ou le chargement des déchets médicaux doit être alimenté par lots manuellement.
La chambre de combustion primaire doit être à foyer fixe fixe (ou four), à chambres multiples, à cornue ou plus
type à sole rotative (ou four) de capacité. Les commandes du brûleur et de l’air de combustion doivent être entièrement automatiques et comprendre, comme un
allumage électronique minimum et tous les verrouillages et dispositifs de sécurité nécessaires pour assurer un fonctionnement sûr. le
Incinerador de residuos biológicos
Información básica.
Información adicional.
Descripción del producto
El incinerador es un equipo de incineración, quema directamente los desechos mediante gas combustible o combustible oi. Como circunscripción diferente, incinerador se puede nombrar muchas palabras como se muestra a continuación:
Capacidad de tratamiento: incinerador de pequeña escala, incinerador de gran escala y pantalón de incineración.
Material de desecho: incinerador de desechos municipales, incinerador de desechos médicos, incinerador de cremación de animales, incineradores humanos
Combustible del incinerador: incinerador de gas, incinerador de petróleo
Conversión de residuos en energía (WTE): incinerador WTE, incinerador sin WTE
Fabricante de incineradores: fabricante de incineradores de China, fabricante de incineradores de Reino Unido, fabricante de incineradores de EE. UU., Fabricante de incineradores de India.
Famosa empresa fabricante de incineradores: Inciner8 (Reino Unido), Clover Incinerator (China), Pennram (EE. UU.), Haat (India)
Velocidad de combustión: 5 kg / hora, 10 kg / hora, 15 kg / hora, 20 kg / hora, 30 kg / hora, 50 kg / hora, 100 kg / hora, 150 kg / hora, 300 kg / hora, 500 kg / hora
Nous fournissons des capacité S de 10/15/20/50/100/150/300/500 Kg / Equipements heures. Chaque anné E, nous vendons plus de 50 unité S d’é Quipements d’outre-mer. L’é Quipement est de petite taille, rendement é Levé, processus raisonnable, des technologies medical incineratoe, incinerador médico 10 kg precio, incinerador médico 15 kg / h, auditoría de incinerador médico, quemador de incinerador médico, comprador de incinerador médico, de pointe et de haut degré Sin peligro. Il est IDé Al pour les é Quipements de traitement des ordures hô Pital, laboratoire, hô Tel, gare, etc Le brû Leur de combustion, d’origine de l’Italie et le Japon cé Lè Bre marque ou técnicas. Mise à Jour la conception du modè Le que PAR 3T (tempé Rature, temps, Turbulence).
| Artículos / Modelo | TS10 (PLC) | TS20 (PLC) | TS30 (PLC) | TS50 (PLC) | TS100 (PLC) |
| Velocidad de combustión | 10 kg / hora | 20 kg / hora | 30 kg / hora | 50 kg / hora | 100 kg / hora |
| Capacidad de alimentación | 20 kg | 40 kg | 60kg | 100 kg | 200 kilogramos |
| Modo de control | SOCIEDAD ANÓNIMA | SOCIEDAD ANÓNIMA | SOCIEDAD ANÓNIMA | SOCIEDAD ANÓNIMA | SOCIEDAD ANÓNIMA |
| Cámara de combustión | 100L | 210L | 330L | 560L | 1200L |
| Dimensiones internas | Los 50x50x40cm | Los 65x65x50cm | Los 75x75x60cm | El 100x80x70cm | El 120x100x100cm |
| Cámara secundaria | 50L | 110L | 180L | 280L | 600L |
| Cámara de filtro de humo | sí | sí | sí | sí | sí |
| Modo de alimentación | Manual | Manual | Manual | Manual | Manual |
| Voltaje | 220 V | 220 V | 220 V | 220 V | 220 V |
| Energía | 0,5 Kw | 0,5 Kw | 0,5 Kw | 0,7 kilovatios | 0,7 kilovatios |
| Consumo de aceite (kg / hora) | 5,4-12,6 | 7,8–16,3 | 10.2-20 | 12.1-24 | 14-28 |
| Consumo de gas (m3 / hora) | 6.2-11.4 | 8-15,7 | 9,8-20 | 9,9-26,1 | 10–32,2 |
| Monitor de temperatura | sí | sí | sí | sí | sí |
| Protección de temperatura | sí | sí | sí | sí | sí |
| Tanque de aceite | 100L | 100L | 100L | 100L | 200L |
| Puerta de alimentación | Los 30x30cm | Los 45x40cm | Los 55x50cm | Los 70x55cm | Los 80x60cm |
| Chimenea | 3 metros | 3 metros | 5 metros | 5 metros | 10 metros |
| Tipo de chimenea | Acero inoxidable | Acero inoxidable | Acero inoxidable | Acero inoxidable | Acero inoxidable |
| Tiempo de residencia | 2,0 seg. | 2,0 seg. | 2,0 seg. | 2,0 seg. | 2,0 seg. |
| Peso bruto | 1500 kg | 2200 kg | 3000 kg | 4500kg | 6000 kg |
| Dimensiones externas | El 140x90x120cm | El 160x110x130cm | El 175x120x140cm | Los 230x130x155cm | Los 260x150x180cm |
Medical Dressing Incinerator
Basic Info.
Additional Info.
Product Description
Nanjing Clover Medical Technology Co., Ltd.
Key Features: * All Versions with Dual combustion chamber.
| Items/Model | YD-10C | YD-20C | YD-30C | YD-50C |
| Burning Rate (kgs/Hour) | 10 kgs/Hr. | 20 kgs/Hr. | 30 kgs/Hr. | 50 kgs/Hr. |
| Feed Capacity (kgs) | 40 kgs | 40 kgs | 50 kgs | 80 kgs |
| Equipment Weight | 1200 kgs | 1200 kgs | 1800 kgs | 2200 kgs |
| Primary Chamber (Liters) | 200 | 200 | 250 | 400 |
| Secondary Chamber (Liters) | 140 | 140 | 140 | 140 |
| External Dimensions (cm) | 170x140x160 | 170x140x160 | 170x140x190 | 180x160x200 |
| Internal Dimensions (cm) | 55x55x65 | 55x55x65 | 55x55x85 | 70x70x85 |
| Oil Tank(Liters) | 50 | 100 | 100 | 150 |
| Door Opening (cm) | 38 x 48 | 38 x 48 | 38 x 48 | 45×55 |
| Chimney (M) | 5 | 5 | 5 | 5 |
| Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Secondary Chamber | YES | YES | YES | YES |
| Mix-Combustion Chamber | YES | YES | YES | YES |
| Smoke Filter Chamber | YES | YES | YES | YES |
| Combustion Fuel | Oil/Gas | Oil/Gas | Oil/Gas | Oil/Gas |
| Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. |
| Temperature Monitoring | YES | YES | YES | YES |
Program Scope: 1. Hospital& practice: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. 2. Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste. 3. Community & Sea Port & Station: Municipal Solid Waste, etc. 4. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation
waste incinerator manufacturer in china
- Burning rate: 250 Kg/hr.
- It should be able to Operate not Less than 10 hours/day
- This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…
- Design Specification: Types A, B, C, D, and E of medical waste
- “PYROLYTIC” combustion, by controlling the gasification of waste.
- The incinerator must avoid the release of black smoke and fine dust, (Smokeless) during the loadings.
- It should be able to reduce the volume of wastes by 98%.
- It should be able to hold emission in the second burn with gas residence of not less than 2 seconds.
The incineration should be completely free from visible smoke as well as offensive odours.
- The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg
- The Temperatures of combustion:Minimum will be 850oC and max 1400oC
- Post combustion: >1100o
- The Internal diameter of the Chimney: Ø 400mm² and its height: 8 Meter
- The Volume of the combustion chamber: Not Less Than 2.3 M³
- Burner operation should be Automatic On/Off
- Fuel : diesel, LPG, Natural Gas, Bio fuel
- The supplier must provide necessary information for the best of the installation
This incinerator with “PYROLYTIC” combustion must have:
- A combustion chamber of waste:
* Perfectly tight door for the manual loading of waste.The loading should be Manual, Batch Load,
* A burner of lighting which the use is limited to the ignition of waste.
* Top Loading loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory.
* The insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminum and insulates bricks in order to assure a minimum temperature on the outside sheet metal.
* Composition of the refractory;
- Refractory concrete :
- . Thickness : ≥100 mm
- . Nature: 42% of Al203
- Insulate in fibrous panels :
- . Thickness: ≥75 mm
- Nature: Calcium silicate.
* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.
- Load Method: Top Loading
- A chamber of post combustion of gases
* A burner of combustion of gases,
* A device of injection of air allowing a total recombustion of gases,
* A device of air inlet of cooling of waste gases,
* A sheath of evacuation of the gases burnt.
* Carcass in strong sheet steel with support of connection.
* Composition of the refractory;
- Refractory concrete :
- Thickness : ≥180 mm
- Nature: 65% of Al203
- Insulate in fibrous panel :