Our normal activities generates 2-5 tons of assorted waste materials per day which range from condemned carcasses, and medical incinerator primary combustion price
other wastes all which need to be incinerated at above 800Centigrade measured flue exhaust gas.To be used by small
hospitals and clinics to safely dispose of infectious and pathological wastes.
Load Capacity in the range of up to 200 kg
– Burning Rate approx. 50kg/Hour –
Incinerators to be very effective, fuel efficient with high / low capacity burn rates
and to be designed to meet the Norms of Pollution Control / DEFRA, etc. Technology:
Temperature Controlled Burner. Heavy-duty casing, to be a quality, rugged, reliable, economical Medical Waste
Incinerator with relevant control, easy to operate and self-contained. Type of Fuel: Diesel / Oil or Petrol.
Units to be pre-assembled, pre-piped, pre-wired & tested before Transport / Export.
Within the framework of an environmental and medical equipment & technology consultation and joint purchasing, this
Procurement Bureau invites applicants for pre-qualification in the aim of primarily selecting capable companies to bid
for the above tender.
The supply will comprise the special equipment for effective waste management as mentioned above for a new private
environment contract management company with planned operations 2013 in Indonesia and Thailand, and 2014 in West & East
Malaysia to carry out those professional services in order to comply with the governments safety disposal requirements
for medical and hospital, clinical waste in the region and to meet the higher technical standard in this particular
field.small incinerators with filter (with least minimum pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr,
20kg/hr, 25kg/hr to 50kg/hr and 300kg/hr of SOLID ORGANIC DRY AND WET NON-HAZARDUOUS of any kind (including hospital
wastes) per day or per hour. Should it be with no smoke, no fumes, no odour (smell), no dust, no emission of solid
particles and with least minimum pollution (within national and international standards). Must be environmentally
healthy and acceptable with international standards. Should not be with water scrubbers. Ash contents after burning
should be 3-4%.
Blog
brûleur de déchets scientifique de gamme minuscule
Déchets dangereux et également dangereux,
Pharmaceutique médical avec des liquides agréables Déchets
Poubelle résidentielle
Déchets électriques et électroniques
Déchets dangereux
Généralement, tous les types de déchets et aussi les ordures
Capacité 50-60Kg / h
Matériaux de maintien de la combustion
Huile de charbon, gasoil
Degré de température à l’intérieur
800-10000C
1000-12000C
Performances brûlantes
> 98%
Puissance absorbée
1,3 KW
Sonner
< 78 dB
Indice de laisser fumer ainsi que les gaz résiduaires
Indice de fumée de Ringelman < niveau 1
Focus sur la fumée
Huile
45,5
(Mg / m3).
Gaz.
25,5
(Mg / m3)
DONC.
Huile.
0.176.
Gaz.
0,065
NOX.
Huile.
0,031.
Gaz.
0,038
H2S.
Huile.
0,016.
Gaz.
0,008
CO
.
Huile. 8.32.
Gaz.
35,64
demande de brûleur de déchets cliniques à petite échelle.
De plus, des produits éruptifs et ignifuges ne sont pas avoués
Affiner la manière.
2 salles de stockage de délestage (séchage par humidité, élimination des saletés chaudes)
Brûlure / Chauffage.
Top qualité fabriqué en Italie
Ventilateur.
Haute qualité fabriqué en Chine
Contrôle électrique.
Haute qualité fabriqué en Chine
Capacité 50 Kg / h
Tension de performance.
220 V
Pouvoir.
1 000 W
Appliqué pour.
200 lits
Style d’entrée.
Pratique
Brûleur médical, 24 kg / h.
Chauffe-clinique, 24 kg / h avec panneau de contrôle, régule en plus des accessoires.
Entrée de l’unité de chauffage.
Cheminée.
Ventilateur.
Chauffage à combustion
Incinérateur médical, 12 kg / h.
Réchauffeur médical, 12 kg / h avec tableau de bord, commandes ainsi que des appareils.
Portail de chauffage.
Smokeshaft.
Ventilateur.
Brûleur brûlant
Incinérateur médical, 6 kg / h.
Chauffe-clinique, 6 kg / h avec panneau, régule en plus des outils.
Entrée de chauffage.
Cheminée.
Ventilateur.
Unité de chauffage brûlant
Newsletter – medical waste
| medical waste | |||||||
| www.imcha.net | |||||||
|
Biomedical waste dumped at Rajindra Hospital
Posing a serious health hazard to the hundreds of patients, biomedical waste has been dumped in open on the premises of the Government Rajindra …
|
|||||||
Marion commissioners to vote on 1-year deal to keep Covanta incinerator open
Sets a 13,500-ton limit on the amount of medical waste that can be burned over the next year. The cap previously was 25,000 tons per year, and …
|
|||||||
|
Medical Waste Management Market is Set for a Rapid Expansion and is Anticipated to Touch USD …
The Prosthetic Heart Valve Market report presents a calculated opinion of the analyzed Prosthetic Heart Valve Market data. It explains various …
|
|||||||
|
Fetal remains case raises lots of questions, few answers
Previously, clinics had the option of sending those remains for incineration along with other human tissues and medical waste. The 2016 law also …
|
|||||||
|
Radioactive Medical Waste Market to witness astonishing growth with Key Players | SRCL …
Radioactive Medical Waste Market is a professional and in-depth study on the current state of the Radioactive Medical Waste industry. This report …
|
|||||||
|
Vaped and Confused
22, 2019 that unspent nicotine in discarded e-cigarette cartridges can constitute hazardous waste under its pharmaceutical waste rules. While EPA …
|
|||||||
|
Indonesia to ship 100 containers of contaminated waste to Australia
B3 is short for Bahan Berbahaya dan Beracun and includes medical waste and materials that could be explosive, inflammable, reactive, infectious or …
|
|||||||
|
The NHS produces 5.4% of the UK’s greenhouse gases. How can hospitals cut their emissions?
It has sent zero waste to landfill since 2011 and recycles more than 40% of non-clinical waste (the average in the NHS is 23%). All procurement …
|
|||||||
Recycling is such a part of life now, North Texans might assume it’s going well. It’s not
Later the same day, his crews found a car seat belt buckle (with the belt still attached to the metal clasp), a medical trash bag, a broken 35 mm camera, …
|
|||||||
|
SEPA DG directs ASH admin to ensure sanitation
He warned Dr Nadeem Rajput Medical Superintendent of ASH for rectification of improper handling of hospital waste and directed for necessary …
|
|||||||
| 查看更多结果 | Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification) | |||||||
| Newsletter。 |
以RSS Feed的形式接收此快讯 |
|
发送反馈
|
Incinerador de aves de corral
Información básica.
Información adicional.
Descripción del producto
Nanjing Clover Medical Technology Co., Ltd. es un fabricante líder de incineradores de desechos en China. Somos fabricantes locales y uno de los mayores exportadores de China. El equipo técnico de incineración pirolítica es el principal tratamiento de desechos en todo el mundo, para desechos médicos, incineración de animales, planta de incineración spittelau, lluvia ácida, esterilizaciones, incineración, invernaderos de esterilización, incineradores de mascotas incineradas, proveedores de incineradores de desechos médicos, cremación de mascotas y otros sólidos. . La capacidad de 10kgs / Hr. Hasta 500kgs / Hr., Hasta 6ton por día. Actualmente, suministramos diferentes series para los requisitos de los clientes locales y diseñamos un incinerador actualizado con nuestra tecnología líder. La característica de diseño actualizado de nuestra gama de incineradores los convierte en uno de los más rentables del mundo.
Incinerador Clover Medical Supply para la cremación de animales de compañía. Este equipo puede quemar mascotas y animales de la familia, aves, gatos, perros, cerdos, etc. La velocidad de combustión es de alrededor de 20-300 kg por hora.
| Artículos | Especificación | ||||
| Modelo | TS10 (PLC) / TS20 (PLC) / TS30 (PLC) / TS50 (PLC) / TS100 (PLC) | ||||
| Lista de productos principal | Cámara de doble combustión | ||||
| Cámara de filtro de humo | |||||
| Caso de control de modo PLC | |||||
| Chimenea de acero inoxidable | |||||
| Quemador de gasoil / gas Italia: 02 unidades | |||||
| Tanque de aceite (si es combustible de aceite) | |||||
waste incinerator manufacturers china
Capacity Not less than 500Kg/hr.
Operation 24hr-7days/week continuous operation.
Combustion chamber 2 combustion chamber.
Temp. First combustion chamber 800-1000 C.
Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C.
Combustion Efficiency 99.99%
Retention time Of the flow gases not less than 2 Sec in the hot portion.
Excess Oxygen concentration Of primary combustion chamber 3-6% max.
Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first combustion chamber, and not less than 1600 C for the secandry combustion chamber, and at the same time prevent the Temp. of the outside body of the chamber not higher than 70 C.
Doors Should be lined with the same bricks, and the edges lined with special suitable insulating material to prevent any gas escaping, and the doors should be kept under negative pressure during the operation.
Air Emission Control System With high destruction and removal efficiency (DRE). Not less than 99.9999 as per KEPA.
Wet System If the system equiped with a CEMS washing the flow gas with water, then it should be manufactured from suitable anti corrossion materials, and equiped with pH meter to measure and neutralize the water. It should be able to use the water in closed recycled circuit many times before treating/ discharging into the sewage system in compliance with KEPARS.
Chemical dosing It should be equiped with suitable autochemical dosing system to control the pH for the water of the wet scrubber system including sensors.
Chimney It should be suitable with the capacity and the technical specifications, with height not less than 12m from ground level. With easy opennable sampling point equal about 3 inch, and the optimum sampling locations is at least 8D downstream direction and 2D upstream from any flow disturbancies.
Sampling point Should be equiped with a platform located down the sampling point by a distance not less than 1 m, and equiped with suitable stairs from ground to the port with comfortable slope.
Ash Removal It should be auto ash removal system.
Fuel It should be dual system, such as diesel and natural gas.
Feeding System Should be auto feeding system into primary chamber.
Control Room Should be equiped with a control panel shows Temp. of the combustion burners, gas monitoring, digital Temp. indecation for the primary/secondary chambers, digital Temp. indication for the gases…etc. it should be also Auto operation, burnures on/off auto lamps switch, auto start/stop for air emission control system, auto gas continuous monitoring system reading and print out of gas emission parameters…etc.
Cooling System The primary chamber should be provided with auto cooling systemthrough nozzles to permit direct cooling if the Temp. will be heigher than 1100 C.
Inter-lock system The incinerator should be equiped with inter-lock system to prevent feeding the waste to the primary chamber if the combustion Temp. less than 500 C.
Flue treatment and cleaning To consist a combined system (wet/dry), using water, lime, active carbon and ceramic filters.
Quenching system/Heat exchanger Should be made and manufactured from anti corrosion and acid attack materials such as stainless steel 316 or equivalent.
Noise Level Not more than 85 dBA during normal operation.
Inaddition The desigh should insure that responsive fail-safe control systems are used.
The incinerator should be installed inside closed suitable building with good aeration and ventilation system. The building has facilities for off-loading of wastes from transport vehicles. Auto cleaning system for trucks and waste containers, and cool storage area…etc.
The quotation should included list of original spare parts for 7 years.
The quotation should include supervising, starting up and training of the operators and ministry of health engineers inside/outside Kuwait.
Detailed drawings, catalogs should be included.
CHUTE ET ÉGALEMENT INCINÉRATION DE DÉCHETS SOLIDES
Déchets biomédicaux Tout type de type de déchets liquides ou forts pouvant présenter un danger d’infection pour les individus consistant en tissus non liquides, parties du corps, sang ou produits sanguins ainsi que des fluides corporels, des laboratoires de recherche et également des déchets vétérinaires qui incluent des maladies humaines – la mise en route des représentants et l’élimination des objets tranchants (p. ex. seringues, aiguilles, lames de scalpel).
Cendres de base Le programme est également un produit non brûlé et incombustible qui reste sur le site de la remise une fois la combustion terminée. Il s’agit des produits restant à rester dans la chambre de fusion, la tuyauterie d’échappement ainsi que les outils de contrôle de la pollution de l’air où de tels outils sont utilisés.
Burn Box Une importante boîte métallique utilisée pour perdre les déchets solides. L’air brûlant est généralement offert passivement au moyen d’ouvertures ou d’évents coupés au-dessus du niveau le plus bas du faisceau. Un pipeline ou une pile d’échappement peut ou non être attaché.
Camp industriel Un centre à court terme, saisonnier ou pluriannuel avec une capacité de plus de 15 personnes ainsi que de même qui a en fait été établi à des fins d’études de recherche, commerciales ou commerciales. Un camp industriel ne contient pas de camp standard ou de camp de zone.
Terres du commissaire Terres qui ont en fait été transférées par décret au gouvernement fédéral du Nunavut. Il s’agit de routes ainsi que de terrains soumis à des blocages de transferts fonciers. La majorité de la terre du commissaire est située dans les districts.
Contamination Tout type de son, de chaleur, de substance ou de vibration et comprend également de nombreuses autres substances que le prêtre pourrait prescrire qui, lorsqu’elles sont lancées directement dans l’ambiance,
- met en danger la santé, la sécurité ou le bien-être des personnes,
- interfère ou est susceptible de gêner la jouissance normale de la vie ou des biens,
- met en danger la santé de la vie animale, ou
- cause ou est susceptible de causer des dommages à la vie végétale ou à la propriété
Initiative développée L’examen récurrent des possibilités de déclins ainsi que l’application d’ajustements ou de mises à niveau du contrôle des rejets qui sont utiles sur le plan pratique et financier et qui conduisent à des réductions continues des gaz d’échappement. Les campagnes identifiées consistent en la croissance et l’exécution de la préparation de la gestion des déchets qui se concentre sur la prévention de la contamination de l’air.
De Novo Synthesis Fabrication de particules complexes à partir de particules faciles.
Cadre Les aspects du monde ainsi que comprend
- l’air, la terre et l’eau,
- toutes les couches de l’atmosphère,
- toutes les matières organiques et inorganiques et les organismes vivants, et
- les systèmes naturels en interaction qui comprennent des éléments visés aux paragraphes a) à c) ci-dessus.
Camp de terrain Une installation temporaire, saisonnière ou pluriannuelle composée de tentes d’extérieur ou de divers autres cadres comparables à court terme d’une capacité de 15 personnes ou moins et qui a été développée pour des études de recherche, des objectifs commerciaux ou commerciaux. Un camp de zone ne consiste pas en un camp traditionnel ou un camp industriel.
Cendres volantes Produit non brûlé qui est envoyé directement dans l’air dans le type de fumée ou de problème tout au long de la procédure de combustion.
Déchets dangereux Une impureté qui est une substance dangereuse et qui n’est plus désirée ou qui est inutile pour son objectif initial assigné ainsi que qui est en outre destinée à la zone de stockage, à la réutilisation, à la thérapie ou à l’élimination.
Incinération Une technologie de traitement incluant les dommages des déchets par brûlage régulé à chaud.
Incinérateur Un gadget ou un cadre destiné principalement à brûler les déchets dans le but de réduire leur volume, de détruire un produit dangereux dans les déchets ou de détruire un produit infectieux dans les déchets. Un appareil de chauffage a suggéré de contrôler la combustion ainsi que les processus de circulation de l’air.
Évaluateur Un particulier nommé en vertu du paragraphe 3 (2) de la loi sur la protection de l’environnement et contient également le principal responsable de la gestion écologique.
Changed Burn Barrel Un tambour en métal utilisé pour éliminer les déchets qui ont été sécurisés avec des gadgets ou des fonctions qui fournissent une génération de chaleur augmentée minimale, une rétention chaude en plus du temps de maintien.
Open up Brûlage des déchets avec un contrôle limité ou nul du traitement par fusion. Pour plus de clarté, le brûlage à ciel ouvert consiste à se répandre sur le sol ouvert ou à utiliser une boîte de décongélation ou un baril de fonte altéré ou non modifié.
Personne certifiée Une personne qui a un bon niveau d’expérience et également une expérience dans tous les aspects essentiels de la gestion des déchets.
Partie responsable Le propriétaire ou la personne responsable, de l’administration ou du contrôle des déchets.
Fumée Les gaz, peu problématiques en plus de tous les autres éléments de combustion générés directement dans le décor lorsqu’un composé ou un produit est décongelé composé de saletés, de déclencheurs, de cendres, de résidus, de cendres et également de fumées.
Déchets forts Produits forts non désirés rejetés d’une résidence (c.-à-d. Immeubles d’habitation uniques ou multiples, diverses autres maisons comparables irréversibles ou de courte durée de vie), institutionnelles (c.-à-d. Institutions, centres gouvernementaux, établissements de santé en plus des centres de santé et de bien-être et de santé), organisation (c.-à-d. magasins, restaurants) ou installations commerciales (c.-à-d. minières, pétrolières et gazières d’exploration et de croissance). Pour la qualité, les déchets solides ne contiennent pas de déchets biomédicaux, de déchets dangereux ou de boues d’épuration.
Camp typique Un camp saisonnier ou bref utilisé principalement pour le camping, la recherche, la pêche à la ligne ou divers autres emplois réguliers ou sociaux. Un camp régulier n’inclut pas un camp de campagne ou un camp commercial.
Baril de combustion non modifié Un tambour en acier utilisé pour éliminer les déchets qui n’ont pas été attachés avec des outils ou des fonctions qui offrent une génération de chaleur améliorée, une rétention de la chaleur ainsi qu’un temps de rétention.
Bois franc Bois franc qui n’a pas été fertilisé chimiquement, repeint ou également modifié pour augmenter la résistance aux ravageurs ou aux intempéries.
Audit des déchets Un approvisionnement ou une étude de la quantité en plus du type de déchets générés dans une zone.
Операция по сжиганию мусора
описание продукта
Компания Nanjing Clover Medical Technology Co., Ltd. является ведущим производителем мусоросжигательных установок в Китае. Мы – местный производитель и один из крупнейших экспортеров Китая. Техническое оборудование пиролитических инсинераторов – это основная обработка отходов во всем мире, включая медицинские отходы, сжигание животных, кремацию домашних животных и другие твердые отходы. Емкость от 10кг / час. До 500 кг / час, до 6 тонн в день. В настоящее время мы поставляем модель инсинератора, модель инсинератора yd-50 по цене, инсинератор nanjing, инсинератор NDWS 50, инсинератор по новой технологии без диоксина, инсинератор для сжигания нефтяного газа, различные серии для местных требований клиентов и проектируем обновленную инсинератор с нашей ведущей технологией. Обновленные конструктивные особенности нашего ассортимента мусоросжигательных печей делают их одними из самых экономичных в мире.
Ключевая особенность:
* Все модели с двойной камерой сгорания.
* Дымоход / дымоход из нержавеющей стали, долгий срок службы.
* Высокая температура, длительный срок службы инсинератора.
* Бесплатная или минимальная установка на месте.
* Высокая скорость сжигания, от 10 кг до 600 кг в час, до 10 тонн в день.
* Плоскость управления ПЛК для интеллектуальной работы.
* Новый дизайн для кремации домашних животных.
* Один год гарантии на инсинератор и запасные части.
| Список продуктов | ||||
| Предметы | Технические характеристики | |||
| Модель YDC | Яр-10С / Яр-20С / Яр-30С / Яр-50С | |||
| Список основных продуктов | Первичная камера сгорания | |||
| Вторичная камера сгорания | ||||
| Камера сгорания смеси | ||||
| Камера дымового фильтра | ||||
| Общий контрольный вариант установки для сжигания отходов | ||||
| Дымоход из нержавеющей стали | ||||
| Горелки дизельные / газовые, Италия: 02 шт. | ||||
| Масляный бак (если жидкое топливо) | ||||
محرقة طبية بدون دخان
معلومات أساسية.
معلومات إضافية.
وصف المنتج
دلائل الميزات:
* جميع الموديلات بغرفة احتراق مزدوجة.
* مدخنة / كومة من الفولاذ المقاوم للصدأ ، عمر طويل. * حسب الطلب
* ارتفاع درجة الحرارة ، وعمر طويل من المحرقة.
* تثبيت مجاني أو بحد أدنى في الموقع.
* معدل حرق مرتفع ، من 10 كجم إلى 500 كجم في الساعة ، حتى 6 طن في اليوم.
* طائرة التحكم PLC. * حسب الطلب
* تصميم جديد لأعمال حرق جثث الحيوانات الأليفة.
* ضمان لمدة سنة على المحرقة والأجزاء الموجودة في المخازن.
المحرقة عبارة عن معدات حرق ، نفايات حريق مباشر بواسطة وقود الغاز أو وقود عالي الجودة. كطوق مختلف ، يمكن تسمية المحرقة بالعديد من الكلمات على النحو التالي:
قدرة المعالجة: محرقة صغيرة الحجم ، محرقة واسعة النطاق وبانت حرق.
مواد النفايات: محرقة النفايات البلدية ، محرقة النفايات الطبية ، محرقة جثث الحيوانات ، محارق الجثث البشرية
وقود المحرقة: محرقة الغاز ، محرقة الزيت
تحويل النفايات إلى طاقة (WTE): محرقة WTE ، محرقة لا تستخدم WTE
الشركة المصنعة للمحرقة: الشركة المصنعة للمحرقة في الصين ، الشركة المصنعة للمحرقة في المملكة المتحدة ، الشركة المصنعة للمحرقة بالولايات المتحدة الأمريكية ، الشركة المصنعة للمحرقة في الهند.
الشركة المصنعة للمحرقة الشهيرة: Inciner8 (UK) ، Clover Incinerator (الصين) ، Pennram (الولايات المتحدة الأمريكية) ، Haat (الهند)
معدل الحرق: 5 كجم / ساعة ، 10 كجم / ساعة ، 15 كجم / ساعة ، 20 كجم / ساعة ، 30 كجم / ساعة ، 50 كجم / ساعة ، 100 كجم / ساعة ، 150 كجم / ساعة ، 300 كجم / ساعة ، 500 كجم / ساعة ساعة
| العناصر / النموذج | TS10 (PLC) | TS20 (PLC) | TS30 (PLC) | TS50 (PLC) | TS100 (PLC) |
| معدل الاحتراق | 10 كجم / ساعة | 20 كجم / ساعة | 30 كجم / ساعة | 50 كجم / ساعة | 100 كجم / ساعة |
| سعة الأعلاف | 20 كجم | 40 كجم | 60 كجم | 100 كجم | 200 كجم |
| وضع التحكم | PLC | PLC | PLC | PLC | PLC |
| غرفة الاحتراق | 100 لتر | 210 لتر | 330 لتر | 560 لتر | 1200 لتر |
| خفض الماوس لعرض الإجابة | 50x50x40 سم | 65x65x50 سم | 75x75x60 سم | 100x80x70 سم | 120x100x100 سم |
| الغرفة الثانوية | 50 لتر | 110 لتر | 180 لتر | 280 لتر | 600 لتر |
| غرفة مرشح الدخان | نعم | نعم | نعم | نعم | نعم |
| وضع التغذية | يدوي | يدوي | يدوي | يدوي | يدوي |
| الجهد االكهربى | 220 فولت | 220 فولت | 220 فولت | 220 فولت | 220 فولت |
| قوة | 0.5 كيلو واط | 0.5 كيلو واط | 0.5 كيلو واط | 0.7 كيلو واط | 0.7 كيلو واط |
| استهلاك الزيت (كجم / ساعة) | 5.4 – 12.6 | 7.8 – 16.3 | 10.2 – 20 | 12.1 – 24 | 14 – 28 |
| استهلاك الغاز (م 3 / ساعة) | 6.2-11.4 | 8-15.7 | 9.8 – 20 | 9.9 – 26.1 | 10 – 32.2 |
| مراقب درجة الحرارة | نعم | نعم | نعم | نعم | نعم |
| حماية درجة الحرارة | نعم | نعم | نعم | نعم | نعم |
| خزان النفط | 100 لتر | 100 لتر | 100 لتر | 100 لتر | 200 لتر |
| باب التغذية | 30×30 سم | 45×40 سم | 55×50 سم | 70×55 سم | 80×60 سم |
| مدخنة | 3 متر | 3 متر | 5 متر | 5 متر | 10 أمتار |
| نوع المدخنة | ستانلس ستيل | ستانلس ستيل | ستانلس ستيل | ستانلس ستيل | ستانلس ستيل |
| وقت الإقامة | 2.0 ثانية. | 2.0 ثانية. | 2.0 ثانية. | 2.0 ثانية. | 2.0 ثانية. |
| الوزن الإجمالي | 1500 كجم | 2200 كجم | 3000 كجم | 4500 كجم | 6000 كجم |
| الابعاد الخارجية | 140x90x120 سم | 160x110x130 سم | 175x120x140 سم | 230x130x155 سم | 260x150x180 سم |
Ydc Model Incinerator
Basic Info.
Additional Info.
Product Description
Key Features: * All models with Dual combustion chamber. * Stainless Steel chimney/stack, long life. *based on sequence * High fever, long life of incinerator. * Free or minimal installation on site. * High speed, from 10kgs to 500kgs per hourto 6ton per day. *based on order New Design for pet animal cremation business. * One year guarantee on incinerator and parts in stock.
YDC incinerator is newest design for waste treatment, include medical waste, animal cremation and other solid waste. This equipment quality structural for kinds of site, such as hospital, environmental division, animal cremation services, etc… CLOVER Incinerator supply updated models with double combustion chamber, mix combustion chamber and smoke filter chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C.
| Product List | ||||
| Items | Specification | |||
| YDC Model | YD-10C / YD-20C / YD-30C / YD-50C | |||
| Main Product List | Primary Combustion Chamber | |||
| Secondary Combustion Chamber | ||||
| Mix Combustion Chamber | ||||
| Smoke Filter Chamber | ||||
| Incinerator Common Control Case | ||||
| Stainless Steel Chimney | ||||
| Italy oil/gas burner: 02 units | ||||
| Oil Tank (if oil fuel) | ||||
small capacity incinerators
1 Basic Plant Design An approved plant must have four distinct sections that demonstrate three principles of Turbulence, Residence Time and Temperature are inbuilt in the plant design .The regulated sections may include but not limited to:
Overall plant layout.
Feed chamber/ charging
Primary Combustion Chamber.
Secondary Combustion Chamber.
Particulate Scrubbers
Acid Gas Scrubbers
The stack/ chimney.
2 Feeding And Charging Controlled hygienic, mechanical or automatic feeding methods have to be used which will not influence the air temperature in the primary and secondary chambers of the incinerator negatively.
No waste is to be fed into the incinerator:
1. Until the minimum temperatures have been reached.
2. If the minimum combustion temperatures are not maintained.
3. Whenever the previous charge has not been completely combusted in the case of batch feeding.
4. Until such time as the addition of more waste will not cause the design parameters of the incinerator to be exceeded.
3 Primary Combustion Chamber The primary combustion chamber must:
1. Be accepted as the primary combustion zone.
2. Be equipped with a burner/s burning gas/fuel or low sulphur liquid fuels. Other combustion methods will be judged on merits.
3. Ensure primary air supply is controlled efficiently
4. Ensure minimum exit temperature is not less than 850oC
4 Secondary Combustion Chamber (Afterburner). The secondary combustion chamber must:
1. Be accepted as secondary combustion zone.
2. Be fitted with secondary burner/s burning gas or low sulphur liquid fuel or any suitable fuel.
3. Ensure secondary air supply is controlled efficiently.
4. Ensure flame contact with all gases is achieved.
5. Ensure residence time is not less than two (2) seconds.
6. Ensure the gas temperature as measured against the inside wall in the secondary chamber & not in the flame zone, is not less than 1100oC.
7. Ensure the oxygen content of the emitted gases is not less than 11%.
8. Ensure both primary and the combustion temperatures are maintained until all waste has been completely combusted
5 Particulate Removers A mechanical particulate collector must be incorporated after secondary combustion chamber for removal of particulate pollutants entrained in the flue gas stream. The particulate collectors may include any of the following or a combination thereof:
Cyclone separator
Electrostatic precipitators
Fabric filters
6 Chimney / Stack 1. The chimney should have a minimum height of 10 meters above ground level and clear the highest point of the building by not less than 3 meters for all roofs. The topography and height of adjacent buildings within 50 meters radius should be taken into account.
2. If possible the chimney should be visible to the operator from the feeding area.
3. The addition of dilution air after combustion in order to achieve the requirement of these guidelines is unacceptable.
4. The minimum exit velocity should be 10 m/s and at least twice the surrounding wind speed (Efflux velocity = wind speed x 2) whichever is higher to ensure no down washing of exiting gases.
5. Point for the measurement of emissions shall be provided.
7 Instrumentation Instrument for determining the inside wall temperature and not burner flame temperature must be provided for both primary and secondary chambers.
2. An audible and visible alarm must be installed to warn the operator when the secondary temperature drops to below the required temperature.
3. In addition to the above the following instruments may also be required.
A carbon monoxide and/or oxygen meter/recorder
A smoke density meter/recorder
A gas flow meter/recorder
A solid particulate meter/recorder
Any other instrument or measurement that may be considered necessary
8 Location / Siting 1. Must be sited in accordance with the relevant local municipal authority planning scheme, the topography of the area and be compatible with premises in the neighborhood,
2. Must be housed in a suitably ventilated room.
9 Emission Limits 1. Combustion efficiency:
Combustion efficiency (CE) shall be at least 99.00%
The Combustion efficiency is computed as follows;
C.E= % CO2 x 100
% CO2 + CO
2. The temperature of the primary chamber shall be 800 ± 50o C
3. The secondary chamber gas residence time shall be at least 1 (one) second at 1050 ± 50o C, with 3% Oxygen in the stack gas.
4 Opacity of the smoke must not exceed 20% Viewed from 50 meters with naked eyes
5. All the emission to the air other than steam or water vapour must be odourless and free from mist, fume and droplets.
6. The Authority may require that the certificate holder have tests carried out by an accredited institution to determine stack and/or ground level concentrations of the following substances.
Cadmium and compounds as Cd
Mercury Hg
Thallium Tl
Chromium Cr
Beryllium Be
Arsenic As
Antimony Sb
Barium Ba
Lead Pb
Silver Ag
Cobalt Co
Copper Cu
Manganese Mn
Tin Sn
Vanadium V
Nickel Ni
Hydrochloric HCL
Hydrofluoric acid HF
Sulphur dioxide S02
7. A 99.99% destruction and removal efficiency (DRE) for each principal organic hazardous constituent (POHC) in the waste feed where:
DRE = [(Win – Wout)/Win]*100
Where: Win = mass feed rate of the POHC in the waste stream fed to incinerator, and
Wout = mass emission rate of POHC in the stack prior to the release to the atmosphere.
8. The average dioxin and furan concentration in the emissions should not exceed 80ng/m3 total dioxins and furans if measured for a period of 6 to 16 hours.
Note:
All pollutant concentrations must be expressed at Oo C and 1.013 x 10 5 N/m2, dry gas and 11% oxygen correction.
Oxygen correction is computed as:
Es = 21 – Os x EM
21 – OM
Where: Es = Calculated emission concentration at the standard percentage oxygen concentration
EM = Measured emission concentration
Os = Standard oxygen concentration
OM = measured oxygen concentration
10 Operation 1. Materials destined for incineration should be of known origin and composition and must be only incinerated in a furnace that is registered for the particular type of waste.
2. A record must be kept of the quantity, type and origin of the waste to be incinerated.
3. The incinerator must be preheated to working temperature before charging any waste.
4. The incinerator must not be overcharged.
5. The incinerator must be in good working order at all times and must not be used if any component fails. Any malfunction should be recorded in a log book and reported to the relevant authority.
6. The incinerator operator and all relevant staff must be trained to the satisfaction of the relevant control authority.
11 Housekeeping The site where the incinerator is built must:
1. Have running water.
2. Have a solid floor.
3. Have lighting if 24hrs operation
4. Have fly ash containerization and storage before disposal.
12 Health & Safety (Protective Gear) 1. Staff handling waste must be well trained on safe handling of hazardous wastes
2. Staff must be provided with appropriate protective gear such as, gas mask, aprons, gumboots, helmets, gloves, goggles.
3. Caution and Warning signs must be provided.
4. Fire fighting equipment must be provided
5. There should be no smoking or eating on the site.