MINIMUM REQUIREMENTS FOR ENGINE OF INCINERATION
CAPACITY OF INCINERATION 30KG / H
1. GENERAL SPECIFICATIONS:
The incinerator for medical waste must be designated for the destruction of all types of waste produced by the Center for Health (waste type hospital, clinic, medical laboratory for destructive capacity of 30kg / h) .
Pyrolytic gasification combustion control shall:
? Prevent development of black smoke and dust formation tine loading of waste;
? Provide regular and complete combustion of the waste;
? Provide controlled guaranteeing the absence of color, cloud of smoke or burning odor;
? Allow limited fuel consumption
The incinerator with pyrolytic combustion must have:
a. Combustor:
– Chamber strong steel support legs sheet;
– The lining is made of refractory bricks and a thermal insulation ensuring a minimum temperature of the sheet;
– The sole combustion is composed of a refractory lining specially designed to meet the thermal, mechanical and corrosive liquid waste requirements and molten glass;
– The dimensions of the floor are equipped laterally primary air nozzles that fuel combustion;
– The hearth is equipped with a stirring system of waste combustion is controlled switch;
– The recovery operation of the ashes will take place once a day line before starting the day’s operation.
Composition of the refractory lining:
* Insulation:
– Operating temperature: 1000 ° C max
– Nature: Calcium Silicate
– Thickness: 80 mm
* Refractory:
– Operating temperature: 1650 ° C max
– Nature: Refractory bricks with 42 alumina
– Thickness: 110mm
Burner combustion:
– The combustion chamber is equipped with a burner to line to ensure correct temperature for the total destruction of waste combustion;
– Automatic monobloc burner and flame plunge equipped with an electronic ignition system and permanent ventilation.
Air fan:
– A primary air and secondary air fan provides the necessary oxygen delivery
– There is a motor operated valve that controls the flow according to the combustion.
– The pressure of the fan is 500 mm CE to pierce the mass of waste during combustion.
b. Post – combustion chamber:
– Treat the gas has a minimum temperature of 1100 ° C with a minimum residence time of two seconds the afterburner is to;
– A secondary air injection is expected and provides perfect oxygen content;
– The burner ensures a minimum temperature of 1100 ° C continuous;
– The design of this burner is similar to combustion burners;
– The afterburner is equipped with access doors in order to ensure regular cleaning of dust;
– The afterburner is lined with high thermal insulation with a thickness of 150 mm
c. Cabinet, control and regulation:
– The entire installation will conform to European standards (EU)
– The electrical power is 220V 50Hz single phase.
– Regulators of temperature with digital display:
? 1 to regulate the temperature of the combustion chamber
? 1 for controlling the temperature of the afterburner
? The manual controls are provided on each item.
2. PRODUCT DIMENSIONS
Description Dimensions
Destructive capacity 30 Kg / hour
Operation 12h/24, 6d / 7
Fuel diesel oil
Chimney Height: 5m, Diameter: 280mm
Volume of combustion
chamber Combustion: 0.3 m3
Post combustion: 0.2m3
Mixed combustion chamber: 0.3m3
` TEMPERATURES:
. Combustion
. Afterburner
900 ° C
1100 ° C
POWER BURNER
Combustion
Afterburner
0.11 KW
0.11 KW0
Fan power 0.37 kW
Blog
Newsletter – waste incinerator
 |
|||||
| waste incinerator | |||||
| www.imcha.net | |||||
|
Durham looks to western corporation for a waste solution
The move has Clarington representatives on edge as they are concerned an anaerobic digestion facility could be built next to the incinerator. Regional …
|
|||||
|
Expired drugs in counties and the challenges of disposing them
Besides the expired drugs, many counties do not have incinerators to burn medical waste and rely on burning chambers, which pose health risks.
|
|||||
|
Global Incinerator Market: Segmented by Manufacturers / Types / Applications / Regions
Key players of the Incinerator are profiled on the basis of various factors, which include recent developments, business … Special Chemical Waste
|
|||||
|
Global Plastic Waste Management Market Analysis 2019-2023 | Growth Rate, Republic Services …
Global Plastic Waste Management Market: About this market. Plastic waste management involves landfilling, incineration, or recycling solutions.
|
|||||
|
Waste Incinerators Sales Market Size by Key Players, Growth Factors, Regions and Applications …
The latest research report on ‘Waste Incinerators Sales market’ by Dataintelo, presents a detailed analysis concerning market share, market valuations …
|
|||||
|
Global Incinerator Market 2019: Babcock & Wilcox(US), CNIM(French), Covanta Energy(US), Suez …
Global Incinerator market report 2019 offers a professional and in-depth study … incineration, Building wastes, Ashes and medical waste incineration;
|
|||||
|
Global Plastic Waste Management Market Analsis, Size, Demand, Growth, Study & Forecast 2019 …
It demonstrates various segments Landfill, Recycle, Incineration and sub-segments Plastic Waste, Heat Energy Generation, Recycled Plastics, Others …
|
|||||
|
Global Fluidized Bed Incinerator Market 2019: Babcock & Wilcox, Martin, Novo Energy …
Global Fluidized Bed Incinerator Industry Analysis, Trends, Growth Rate, Development, Forecast 2019-2024 … Get an access to full report@ …
|
|||||
| 查看更多结果 | Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification) | |||||
| Newsletter。 |
 以RSS Feed的形式接收此快讯 |
|
发送反馈
|
Programa de incineradores
Información básica.
Información adicional.
Descripción del producto
Las líneas de incineración tienen escala pequeña a gran escala, hasta 500 kg por hora. La cámara de combustión utiliza material de alta resistencia, costoso pero de mejor calidad que la competencia. El sistema de operación del incinerador utiliza el modo de control del programa PLC, renuncia a la complicada operación manual.
¿Cómo puede encontrar un incinerador razonable para su sitio local?
El incinerador no es un equipo barato, generalmente el precio del modelo a pequeña escala es de alrededor de $ 5, 000usd por unidad y el precio del modelo a gran escala más de $ 50, 000usd por unidad. Entonces, antes de comprar los métodos de tratamiento médico de los incineradores, los incineradores portátiles, los proveedores de incineradores, los incineradores utilizados en los laboratorios, los incineradores de vietnam, los incineradores de una unidad, debes aclarar los siguientes elementos:
A, quemar qué? El incinerador es un equipo de incineración, la función es el desperdicio del fuego. Entonces, ¿qué tipo de residuos desea tratar?
B, ¿pequeño o grande? Esto de acuerdo con la producción de desechos todos los días o el volumen de desechos por tiempo de alimentación, como el tamaño del animal.
C, combustible? El incinerador utiliza combustible de petróleo o gas, en general, el combustible de gas es más barato que el petróleo y el humo más limpio que el modelo de combustible de petróleo. Pero algunos sitios locales no tienen sistema de suministro de gas.
Y otros elementos tecnológicos, como energía (220v, 380v), tipo de puerta de alimentación de desechos, estructura del incinerador, etc.
| Artículos | Especificación | ||||
| Modelo | TS10 (PLC) / TS20 (PLC) / TS30 (PLC) / TS50 (PLC) / TS100 (PLC) | ||||
| Lista de productos principal | Cámara de doble combustión | ||||
| Cámara de filtro de humo | |||||
| Caso de control de modo PLC | |||||
| Chimenea de acero inoxidable | |||||
| Quemador de gasoil / gas Italia: 02 unidades | |||||
| Tanque de aceite (si es combustible de aceite) | |||||
Brûleur maximisant les performances de combustion
Plus de fumée ainsi que divers autres polluants sont introduits directement dans l’air tout au long des étapes de “ démarrage ” ainsi que des étapes “ étonnantes ” du cycle de remise
que tout au long de la «phase de dégel complet» lorsque les chaleurs sont préservées. Les feux couvants à température réduite doivent être
empêché. Faire fondre juste la matière première sèche ainsi que parfois inclure des déchets ajoutés au feu afin de maintenir un taux de fusion élevé
les niveaux de température jusqu’à ce que tous les déchets aient vraiment été détruits. Si les déchets doivent être brûlés à ciel ouvert sur le sol, en profitant des parois profondes ou abruptes
Les «fosses» doivent être évitées car cela arrêtera certainement le mélange dur et nécessaire de l’oxygène avec les gaz combustibles.
Le degré de température de fonctionnement préféré doit être complété aussi rapidement que possible lors de l’utilisation de tout type de dispositif de combustion ou d’incinération. UNE
Un “ démarrage ” rapide peut être obtenu en remplissant d’abord ouvertement du papier complètement sec, des emballages de produits en carton et sans traitement du bois jusque dans le bas
du gizmo. Un matériau sec et ouvertement emballé stimulera plus rapidement et brûlera également plus uniformément qu’une tonne humide et solidement bourrée.
Exigence de déchets humides à inclure simplement après que le feu brûle de manière proactive. Un remplissage excessif de la chambre de combustion évitera absolument les pluies
mélange de gaz combustibles en plus de l’oxygène, avec doit être protégé contre.
Les incinérateurs modernes d’alimentation par lots sont fabriqués avec des appareils de chauffage de soutien et principaux pour accomplir et protéger le haut requis.
dégeler les niveaux de température. Les déchets ajoutés doivent simplement être constitués dans ces incinérateurs une fois que la phase de “ refroidissement ” a effectivement été
terminé avec, il est sécuritaire de le faire.
small scale medical waste incinerator
Toxic and dangerous wastes,
Medical pharmaceutical and hospitable liquids Wastes
Domestic garbage
Electric and electronic wastes
Industrial wastes
In General, all type of wastes and garbages
Capacity 50-60Kg/h
Combustion supporting materials
Coal oil, diesel oil
Temperature inside
800-10000C
1000-12000C
Burning efficiency
＞98%
Power consumption
1.3KW
Noise
＜78dB
Index of let smoke and waste gas
Ringelman’s smoke index＜ level 1
Smoke concentration
Oil
45.5
（mg/m3）
Gas
25.5
（mg/m3）
SO
Oil
0.176
Gas
0.065
NOX
Oil
0.031
Gas
0.038
H2S
Oil
0.016
Gas
0.008
CO
Oil
8.32
Gas
35.64
small scale medical waste incinerator Requirements
Incombustible and explosive materials not allowed in
Process manner
Two combustion cabinets (wetness drying, high temperature dust removal)
Combustion / Burner
Good Quality made in Italy
Blower
Good Quality made in China
Control Electrical
Good Quality made in China
Capacity 50 Kg/h
Working Voltage
220 V
Power
1000 W
Applied For
200 beds
Input Fashion
Manual
Medical Incinerator, 24 kg/hr
Medical Incinerator, 24 kg/hr including panel board, controls and accessories
Furnace gate
Chimney
Blower
Combustion burner
Medical Incinerator, 12 kg/hr
Medical Incinerator, 12 kg/hr including panel board, controls and accessories
Furnace gate
Chimney
Blower
Combustion burner
Medical Incinerator, 6 kg/hr
Medical Incinerator, 6 kg/hr including panel board, controls and accessories
Furnace gate
Chimney
Blower
Combustion burner
incinérateur pour animaux de compagnie à vendre
- Nous cherchons un incinérateur simple qui devrait être alimenté avec des bouteilles de GPL domestiques. Autres sources de
l’allumage peut également être envisagé, mais nous devons garder les choses simples.
Section VI. Exigences 2-86
nécessaire pour la maintenance préventive pendant cinq ans et, le cas échéant, inclure le stock de pièces de rechange recommandées pour
maintenance corrective.
- n) Formation
- i) Le fournisseur est tenu de fournir une formation adéquate sur chaque équipement sur l’utilisation et le fonctionnement corrects du
équipement. · Style laboratoire compact
- Deux chambres de combustion
- Écologique
- Jusqu’à 50kg de déchets / heure
- A utiliser pour les animaux
- ii) De même, les fournisseurs sont tenus de fournir une formation adéquate du fabricant sur l’installation et
maintenance (à la fois préventive et corrective)
- o) Conditions d’emballage et de stockage de l’équipement
- i) L’équipement et les composants doivent résister à des températures et à une humidité extrêmes susceptibles d’être rencontrées pendant
stockage et transport.
- ii) Le fabricant devrait recommander des procédures de stockage de l’équipement.
Медицинские мусоросжигательные установки Clover
описание продукта
Nanjing Clover Medical Technology Co., Ltd., местная в городе Нанкин, Китай. CLOVER – производитель медицинских изделий, мусоросжигательных установок и другого оборудования для защиты окружающей среды. Цена на инсинератор для животных, цена на инсинератор для домашних животных, цена на инсинератор, цена на инсинератор для животных, цена на инсинератор для животных, рыночная сеть на территории Китая и более чем 30 стран мира.
CLOVER поставляет медицинское оборудование, установки для сжигания медицинских отходов, крематоры для домашних животных, другое оборудование для обработки твердых отходов, оборудование для чистых помещений, блоки фильтров вентилятора, воздушный фильтр и т.д.
Мы являемся одним из крупнейших производителей и экспортеров установок для сжигания мусора в Китае. Пиролитический мусоросжигательный завод является основным методом обработки отходов во всем мире, включая медицинские отходы, сжигание животных, кремацию домашних животных и другие твердые отходы. В настоящее время мы поставляем малые и крупные мусоросжигательные установки в соответствии с требованиями местных заказчиков и проектируем обновленные мусоросжигательные установки с использованием наших передовых технологий.
Nanjing Clover Medical Technology Co., Ltd.
Телефон: + 86-25-8461 0201
Факс: + 86-25-8461 0406
| Предметы / Модель | TS10 (ПЛК) | TS20 (ПЛК) | TS30 (ПЛК) | TS50 (ПЛК) | TS100 (ПЛК) |
| Скорость сжигания | 10 кг / час | 20 кг / час | 30 кг / час | 50 кг / час | 100 кг / час |
| Емкость подачи | 20кг | 40кг | 60кг | 100кг | 200 кг |
| Режим управления | ПЛК | ПЛК | ПЛК | ПЛК | ПЛК |
| Камера сгорания | 100л | 210л | 330 л | 560 л | 1200L |
| Внутренние размеры | 50x50x40 см | 65x65x50 см | 75x75x60 см | 100x80x70 см | 120x100x100 см |
| Вторичная камера | 50 л | 110л | 180л | 280L | 600 л |
| Камера дымового фильтра | да | да | да | да | да |
| Режим подачи | Руководство по эксплуатации | Руководство по эксплуатации | Руководство по эксплуатации | Руководство по эксплуатации | Руководство по эксплуатации |
| Напряжение | 220В | 220В | 220В | 220В | 220В |
| Мощность | 0,5 кВт | 0,5 кВт | 0,5 кВт | 0,7 кВт | 0,7 кВт |
| Расход масла (кг / час) | 5,4–12,6 | 7,8–16,3 | 10,2–20 | 12.1–24 | 14–28 |
| Расход газа (м3 / час) | 6,2–11,4 | 8–15,7 | 9,8–20 | 9,9–26,1 | 10–32,2 |
| Монитор температуры | да | да | да | да | да |
| Температурная защита | да | да | да | да | да |
| Масляный бак | 100л | 100л | 100л | 100л | 200л |
| Дверца подачи | 30×30 см | 45×40см | 55×50см | 70×55см | 80×60 см |
| Камин | 3 метра | 3 метра | 5 метров | 5 метров | 10 метров |
| Тип дымохода | Нержавеющая сталь | Нержавеющая сталь | Нержавеющая сталь | Нержавеющая сталь | Нержавеющая сталь |
| 1-й. Температура камеры | 800 градусов – 1000 градусов | 800 градусов – 1000 градусов | 800 градусов – 1000 градусов | 800 градусов – 1000 градусов | 800 градусов – 1000 градусов |
| 2-й. Температура камеры | 800 градусов – 1000 градусов | 800 градусов – 1000 градусов | 800 градусов – 1000 градусов | 800 градусов – 1000 градусов | 800 градусов – 1000 градусов |
| Время проживания | 2.0 сек. | 2.0 сек. | 2.0 сек. | 2.0 сек. | 2.0 сек. |
| Вес брутто | 1500 кг | 2200кг | 3000кг | 4500кг | 6000кг |
| Внешние размеры | 140x90x120 см | 160x110x130 см | 175x120x140 см | 230x130x155 см | 260x150x180 см |
medical waste incinerator for sale
Waste type: health care waste
Waste density: 125 to 350Kg/M3
Waste calorific value: 4000KCAL/kg
Moisture content: 10 – 25%
Estimated ash residue: 5 – 10%
Nominal capacity: 50kg/hr batch load
Secondary chamber: 2 seconds@850?C
Environmental: NEMA ACT (EMCA) 1999, Waste Management regulations, 2006
Primary Combustion chamber:
The primary combustion chamber is the main structure of the incinerator, fabricated from mild steel plate and stiffened with rolled steel sections.
It is carried from the floor level on a substantial steel support frame. Internally the shell is lined with calcium silicate insulation and a hot face combination of super duty brickwork or high strength castable.
The primary combustion chamber must ensure minimum exit temp is not less than 850?C.
One Manual Load Incinerator comprising:
Manual loading door
Horizontal solid hearth, refractory lined primary combustion chamber. Approx. dimensions 800x2100mm(DxL)
Full sized bulk load/ash removal door
1 off diesel-fired ignition burner – temperature controlled
1 off combustion air supply fan and distribution system, automatic control
High capacity secondary combustion chamber with residence time not less than 2 seconds @>850?C
1 off diesel-fired afterburner – temperature controlled
Control panel – automatic operation
Temperature indication primary and secondary chambers 0-1200?C
Refractory lined flanged chimney to a height of 10M above ground level
NB: The secondary combustion chamber must ensure that the gas temp as measured against the inside wall in the secondary chamber & not in the flame zone, is not less than 1100?C
Throughput: 50kg/hr at a nominal calorific value of 4,000kca/kg and an average bulk density of 120kg/m3 for general waste and 160kg/m3 for health care waste.
Ash: The waste will be reduced by 90~95% to leave 10-5% ash
Quality/Environmental Standards: NEMA ACT (EMCA) 1999, BS3316
Operating period: anticipated daily operating period 8 hours
Maximum operating period: 12 hours
Chamber: should be refractory lined to the following standard;
Hearth and lower section of chamber walls
Hot face material:
Super duty firebrick
Limiting continuous service limit 1500?C
Thickness: 100mm
Thermal conductivity: 1.3W/mk
Insulation:
Calcium silicate
Limiting continuous service limit 1000?C
Thickness: 25mm
Thermal conductivity: 0.095W/mk
Chimney/Stack: Should be manufactured from refractory lined mild steel or high quality air-cooled s/s.
The chimney/stack should have a minimum height of 10m above ground level
Ignition burners: fully packaged oil type, complete with electric ignition and flame failure controls, wired with continuous running fan and complete with all valves, fan and motor.
Maximum rating: at least 450kW/hr
Burner: arranged for on/off operation
Maximum consumption: at least 6Ltrs/hr
Average consumption: at least 3Ltrs/hr
Afterburner:
fully packaged oil type, complete with electric ignition and flame failure controls, wired with continuous running fan and complete with all valves, fan and motor.
Maximum rating: at least 450kW/hr
Burner: arranged for on/off operation
Maximum consumption: at least 9Ltrs/hr
Average consumption: at least 4.5Ltrs/hr
Flue gas treatment: should have particulate remover (scrubbers)
Electrical supply: single phase: 220/240VAC; 50/60Hz
Documentation:
medical waste incinerator for sale Operation manual: 2 sets
Service/maintenance manual: 2 sets
Certification: NEMA (or other recognized) certification
Capacity to service equipment: the agent/supplier shall have adequate facilities, spare parts, consumables and qualified skilled technical staff.
Training: the Agent shall conduct a two days incinerators training after installation and commissioning of the equipment.
The Agent shall conduct a two days operation & maintenance training to the Biomedical engineering personnel after installation & commissioning of the equipment.
LPG Incinerator
Basic Info.
Additional Info.
Product Description
| Items/Model | TS10(PLC) | TS20(PLC) | TS30(PLC) | TS50(PLC) | TS100(PLC) |
| Burn Rate | 10 kg/hour | 20 kg/hour | 30 kg/hour | 50 kg/hour | 100 kg/hour |
| Feed Capacity | 20kg | 40kg | 60kg | 100kg | 200 kg |
| Control Mode | PLC | PLC | PLC | PLC | PLC |
| Combustion Chamber | 100L | 210L | 330L | 560L | 1200L |
| Internal Dimensions | 50x50x40cm | 65x65x50cm | 75x75x60cm | 100x80x70cm | 120x100x100cm |
| Secondary Chamber | 50L | 110L | 180L | 280L | 600L |
| Smoke Filter Chamber | Yes | Yes | Yes | Yes | Yes |
| Feed Mode | Manual | Manual | Manual | Manual | Manual |
| Voltage | 220V | 220V | 220V | 220V | 220V |
| Power | 0.5Kw | 0.5Kw | 0.5Kw | 0.7Kw | 0.7Kw |
| Oil Consumption (kg/hour) | 5.4–12.6 | 7.8–16.3 | 10.2–20 | 12.1–24 | 14–28 |
| Gas Consumption (m3/hour) | 6.2–11.4 | 8–15.7 | 9.8–20 | 9.9–26.1 | 10–32.2 |
| Temperature Monitor | Yes | Yes | Yes | Yes | Yes |
| Temperature Protection | Yes | Yes | Yes | Yes | Yes |
| Oil Tank | 100L | 100L | 100L | 100L | 200L |
| Feed Door | 30x30cm | 45x40cm | 55x50cm | 70x55cm | 80x60cm |
| Chimney | 3Meter | 3Meter | 5Meter | 5Meter | 10Meter |
| Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| 1st. Chamber Temperature | 800–1000 degree | 800–1000 degree | 800–1000 degree | 800–1000 degree | 800–1000 degree |
| 2nd. Chamber Temperature | 1000-1200 degree | 1000-1200 degree | 1000-1200 degree | 1000-1200 degree | 1000-1200 degree |
| Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. |
| Gross Weight | 1500kg | 2200kg | 3000kg | 4500kg | 6000kg |
| External Dimensions | 140x90x120cm | 160x110x130cm | 175x120x140cm | 230x130x155cm | 260x150x180cm |
Principle of This Incinerator equipment is incineration/combustion/burn.
incinérateur diesel de déchets médicaux
Incinérateur diesel de déchets médicaux Taux de combustion: 47,5–50 kg / heure
Température de fonctionnement minimum: 850o C (combustion primaire)
Température de fonctionnement maximale: 1450 oC (chambre de postcombustion)
Capacité de combustion secondaire: obligatoire
Isolation de densité: 20 mm de haut
Moulage réfractaire: minimum 65 mm
Revêtement réfractant robuste pour résister: 1500 oC
Durée de combustion moyenne: maximum: 3 heures
Type de carburant: Diesel
Consommation de carburant en L / h: 7,5 à 9
Temps de séjour dans la chambre secondaire: 2sec
Poteau de cendres résiduelles 100 kg: 3,8 kg maximum
Dispositif pour éviter les projections infectieuses et / ou la contamination croisée en stérilisant en toute sécurité les aiguilles, les anneaux, etc. par chaleur infrarouge.
Caractéristiques électriques
1) Une source électrique monophasée 120V, 60Hz avec fiche de raccordement de ligne type NEMA 5-15.
2) Protections contre les surtensions et les surintensités de la ligne.
3) Conformité aux normes et réglementations haïtiennes applicables.
Caractéristiques opérationnelles
4) Stérilisation complète rapide en 5 à 7 s environ.
5) Tube en quartz / céramique entièrement isolé, pour garantir la sécurité de l’utilisateur (pas de flamme nue).
6) Température de fonctionnement autour de 820 ° C.
7) Monté sur une base stable, comme dans l’exemple ci-dessous.