Hot Medical Waste Disposing Machine Burn rate per hour: 250 -300kg/hr

Incinerator should be smokeless, odourless combustion and it should be made by high-quality cast, insulation, and steel plate as well as minimum generation of dust. Moreover the incinerator should be corrosion resistant. 
 

Type

Pyrolytic:- Hot Medical Waste Disposing Machine

 

Operation Condition

8-16 Hr /day

Controls

Built in data recording

Incinerator
/Primary Combustion Chamber

Type: continuous loading

Capacity/Burn rate per hour: 250 -300kg/hr

Temperature:  900-1200 oC

 

Material:

External- 3 layers

Internal lining:  a fire proof material of pre-fired refractory bricks with Aluminium lining, resistant to corrosive waste or gas and to thermal shock

Secondary
Combustion
Chamber

Type: horizontal/vertical

Temperature: 1200-1400 oC

Residence time of gases : >2 seconds

 

Material

External- Low thermal mass insulation 14-30 oC

Internal lining:  a fire proof material of pre-fired refractory bricks with Aluminium nettle lining, resistant to corrosive waste or gas and
to thermal shock.

Ash Handling System

Both Automatic and manual removal of Ash. Must ensure removal/treatment of hazardous remnants of ash.

Flue gas treatment   system  

 

 

 

 

Capable of treating the flow of flue  gas as the incinerator is operating at its maximum capacity

Auxiliary device: Water level gauge, pressure sensor, PH sensor..etc.

Auxiliary device: Fuel cut off device

Waste  feeding mechanism

Automatic pneumatic/hydraulic waste loading system or conveyor belt , capacity 650-800L at a time                                                                                                                                      

Chimney (Stack)

Type: Vertical type

height: 7-10 meters

Material: Fireproof cast, stainless steel

Wet scrubbing system

Vertical sprat tower with baffles or packing inside

Gas emission

Reduction of Pollutant gas SO2, HCL, HF and line particulate

OUTPUT

ASH -Max <5% of original waste size

GAS- SMOKELESS,ODORLESS

Emission standard

WHO/ European

Test report for emission testing

Must be provided

Product Data sheet/ Catalogue

Must be attached to the ITB

Additional Requirement

– Local agent or branch in Ethiopia

– Training for users as well as for EPHI maintenance staff  on preventive maintenance

– Fuel tanker with a minimum capacity of 2500 litre (made of plastic material with overfill prevention valve ,fuel gauge, lifting eyes)

– The bidder should be willing to sign at least a five years’ service and maintenance agreement with the client (EPHI)

– The supplier shall arrange by itself lifting equipment and labour needed during the installation, testing and commissioning of the incinerator