Blog

———————————–

• Failure to establish the authenticity of the certificate the bidder is liable to render the bid non-responsive and

bidder open to action in the line with applicable regulations and act.

• Original catalogue must be submitted
• Original data sheet must be submitted

Lot-B

1. Solidifier (Fluid waste disposal Product)

Liquid Waste Solidifier for Water Based.

Special Features of Solidifier

21b bottle

• Effectively solidifies potentially serious infectious waste quickly
• Quickly penetrates to solidify blood and body fluid to convert Gels in seconds
• No shaking required
• Retains solidity to prevent spills and leaks for safe and easy bagging and easy Transport to disposal
• Concentrated formula: one ounce solidifies 1000 cc of liquid
• Dissolvable pouches gel 500 cc and 1000 cc, eliminating plastic bottle waste Chlorine-free for non-toxic incineration

Physical/Chemical Characteristics:

Boiling Point ( F) : N/A   Appearance & Odor: Off white,

odorless

Vapor Pressure (mm Hg) : N/A Volatiles (‘% by weight):

N/A

Vapor Density (Air = 1): N/A     Evaporation Rate (n-

butylacetate = 1): N/A

HMIS Classification:

Health: 1: Flammability: 1

Reactivity Data:

Stability: Stable

Conditions to Avoid: None known

Incompatibility (materials to avoid): Strong oxidizers

Hazardous Decomposition: Thermal decomposition: CO, Co2, and NOx hydrocarbons

Hazardous Polymerization: Will not occur

Handling and Storage Precautions:

Store in cool, dry place. Avoid breathing powder. Avoid eye and skin contact. Store in tightly closed container. 80% of

shelf life should be present at the time of supply.

1) Policy

– Waste disposal management shall be taken special note to prevent hospital infection.

– Infections wastes shall be managed, stored strictly and burned by a incinerator located at hospital site.

2) Waste Disposal Plan

1. a)Classification

– Medical wastes in hospital are classified as follows;

1. b) Infections Waste Disposal

– Segregation: Infections waste disposal shall be segregated appropriately and packed in particular containers and delivered to particular storage. The segregation, packing and delivery shall be operated appropriately at each room such as outpatient, operation theater, blood collection room and dialysis room.

– Precaution: Infections waste shall not be place in other containers on the way of segregation, packing and delivery.

– Storage: Infections waste shall be stored at the storage in hospital site temporarily until infections waste is incinerated.

– Incinerator:

It is designed to sterilize medical waste , reduce its volume , and render its components unrecognizable all in one fully enclosed and automated system.

It combines direct heated steam , high pressure and shredding to treat infectious materials.

The contaminated waste is loaded into the upper stainless steel chamber where a heavy-duty shredder reduces the waste into small pieces. Using gravity, the processed material falls into the treatment chamber where every piece is steam heated to 134 and pressurized to 3 to bar for 20 minutes. The operating conditions are continuously monitored and validated to achieve complete sterilization.

The 60 minutes average duration process cycle is totally automated. A computerized system monitors the process and automatically prints a report with the essential sterilizing parameters at the end of the cycle for accurate record keeping.

The capacity is between 500 to 600 kg/cy.h or more.

Treatment cycle:

1- Loading ; the contaminated waste is automatically -loaded into the chamber of the unit

2-Shredding; the heavy-duty shredder cut the material into small pieces and features a unique reversing system to avoid jamming

3-Heat; saturated pressurized steam raises the temperature to 134 C and the pressure to 3 bar

4-Sterilization; the sterilization comes into direct contact with the shredding material (134 c , 3 bar) for 20 minutes

5-Cooling; temperature is lowered to 80 C by spraying cool water onto Double jacket of the treatment vessel, simultaneously, the unit returns to ambient pressure

6-Draining; the steam is condensed to water and discharged with the cooling water to the sanitary sewer system

7-vacuum; the remaining residual steam is vented out through a vacuum pump

8-Unloading; a digital signal informs the operator that all safe operating conditions have been met

The condition unlocks the unit and allows gravity unloading of the treated waste into a container

Teaching Specification

General Characteristics