Blog

Инсинератор, двухкамерный, 300 кг / час

Базовая информация.

Номер модели: модель горелки для кремации круп
Источники очистки: переработка твердых отходов
Методы обработки: сжигание
Экспортные рынки: глобальный

описание продукта

Компания Nanjing Clover Medical Technology Co., Ltd. является ведущим производителем мусоросжигательных установок в Китае. Мы – местный производитель и один из крупнейших экспортеров Китая. Техническое оборудование пиролитической установки для сжигания отходов является основной обработкой отходов во всем мире: установка для сжигания медицинских отходов, установка для сжигания медицинского оборудования Clover, установка для сжигания медицинских отходов, установка для сжигания медицинских отходов клевера, компания clover medical limited, clover medical limited, arabia saudi, clover medical limited, ведущий производитель установок для сжигания отходов, Сжигание животных, кремация домашних животных и другие твердые вещества. Емкость от 10кг / час. До 500 кг / час, до 6 тонн в день. В настоящее время мы поставляем различные серии в соответствии с требованиями местных клиентов и проектируем обновленную мусоросжигательную печь с использованием наших передовых технологий. Обновленные конструктивные особенности нашего ассортимента мусоросжигательных печей делают их одними из самых экономичных в мире.
Ключевая особенность:
* Все модели с двойной камерой сгорания.
* Дымоход / дымоход из нержавеющей стали, долгий срок службы. * по заказу
* Высокая температура, длительный срок службы инсинератора.
* Бесплатная или минимальная установка на месте.
* Высокая скорость сжигания, от 10 кг до 500 кг в час, до 6 тонн в день.
* Плоскость управления ПЛК. * по заказу
* Новый дизайн для кремации домашних животных.
* Один год гарантии на инсинератор и запасные части.

Предметы Технические характеристики
Модель YD Яр-30 / Яр-50 / Яр-100 / Яр-150 / Яр-200 / Яр-300 / Яр-500 / Яр-600
Список основных продуктов Первичная камера сгорания
Вторичная камера сгорания
Камера сгорания смеси
Камера дымового фильтра
Общий контрольный вариант установки для сжигания отходов
Дымоход из нержавеющей стали
Горелки дизельные / газовые, Италия: 02 шт.
Масляный бак (если жидкое топливо)

Small Medical Waste Incineraotr for COVID-19 Bio Hazardous Medical Waste

HICLOVER – Medical Environmental 

Model

YD-20

Picture

Burning Rate

Average 20 kgs/hour

Feed Capacity

Average 60 kgs/feeding

Primary Combustion Chamber

360 Liters

Secondary Combustion Chamber

200 Liters

Mix Combustion Chamber

Yes

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

1.0 Kw

Fuel Type

Diesel Oil/ Natural Gas/LPG

Burner

Italy Original

Oil Consumption (Diesel Oil)

Average 13.3 kg/hour

Gas Consumption (Natural Gas)

***

Internal Dimensions

100 x 60 x 60cm (primary chamber)

External Dimensions

145 x 90 x 260cm (without chimney)

Temperature Monitor

Yes

Oil Tank Capacity(if oil fuel)

200 Liters

Door Opening

48 x 60cm

Chimney Length

5.0 Meters

Chimney Type

Stainless Steel

Equipment Gross Weight

2300 kgs

Operation Technical Specifications

Primary Chamber Temperature

800℃–-1000℃

Secondary Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Burning Efficiency

>98%

Waste Lower Calorific Power

3000Kcal

Wearing a face mask to keep out the coronavirus has become an essential part of everyday life for many people 
around the world, but the huge amount of waste being created as the single-use items are tossed aside has the 
potential to become an ecological disaster.

How to deal with discarded face masks, which number in their millions or even billions, is another headache for 
Chinese authorities already cau
ght between containing the viral disease and limiting the economic damage caused by it.

The country’s inadequate medical waste treatment capabilities have also been put under the spotlight, environmental experts said.

Environment and health authorities say masks and other protective gear, especially items used by medical personnel and 
people infected with the coronavirus, should be treated as clinical waste, and sterilised before being incinerated at high 
temperatures at dedicated facilities.

While it is difficult to get an exact figure on the number of discarded masks, it is reported that the volume of medical 
waste in Wuhan, the city in which the epidemic began in December, had quadrupled to more than 200 tonnes a day last 
week, according to mainland Chinese media reports.

The total amount of medical waste gathered across Hubei province on February 24 totalled 365 tonnes, of which 60 per 
cent came from hospitals, the report said.

By comparison, Wuhan produced 17,000 tonnes of medical waste in the whole of 2018, according to the country’s top 
environment watchdog.

Eric Liu, a toxic waste specialist at Greenpeace’s Beijing office, said China had a huge shortage of waste disposal facilities, 
specifically those capable of handling clinical waste.

“The waste treatment capacity in China, especially in terms of medical and hazardous waste, is barely enough to cope 
with everyday needs, let alone the country’s biggest public health crisis in decades,” he said.

While the environment ministry said most medical waste was being properly dealt with in major cities, just 31 per cent 
of the country’s 629,000 tonnes of medical waste were treated in 2015, up from 24 per cent in 2008, Xinhua reported 
last year, citing an industry study.

Du Huanzheng, director of the Recycling Economy Institute at Tongji University in Shanghai, also expressed concerns 
over the widening supply-demand gap in medical waste treatment, but said a large number of new facilities were being built or planned.

“The disposal of medical waste is a major part of the battle against the outbreak, which is a wake-up call for the government 
to speed up the construction of new facilities and research into waste treatment technologies,” he said.

The coronavirus outbreak could be the catalyst for expanding the medical waste sector and lead to the building 
of more incineration facilities, the experts said.

They said combustion remained the preferred means for disposing of medical waste in China, although industrialised 
countries were phasing out incinerators due to health and environmental concerns.

Masks could be split into three categories, Liu said. While clinical waste must be disposed of at dedicated incineration
 facilities, masks used by healthy people could be tackled in a similar way as household waste, which was burnt in industrial furnaces, he said.

The real challenge came from those used by people who were placed under home quarantine or others with mild symptoms, he said.

“There is a grey area over this kind of used mask, which are not under the jurisdiction of medical institutions but should 
be treated in accordance with standards for medical waste.”

In Wuhan, authorities are scrambling to find solutions to the challenge. The environment ministry said the city’s five incinerators 
for household waste disposal and various industrial furnaces at cement and other factories had also been
assigned to help clear 
the garbage backlog, which stood at about 190 tonnes as of February 24.

According to a report by China Economic Daily, Wuhan is rushing to build more medical waste treatment plants near hospitals, 
including ones near Huoshenshan, Leishenshan and Jinyintan hospitals that will treat nine, 15 and four tonnes of clinical garbage respectively on a daily basis.

A total of 17 temporary storage facilities for medical waste, with a combined capacity of more than 1,000 tonnes, have also been built.

While authorities had to transfer some of the garbage produced in Wuhan to neighbouring cities for incineration, they have also 
tried to enlist help from waste treatment companies around the country.

China Shipping Group and a company in Anhui deployed a number of mobile medical waste incineration cabins to Wuhan last month, Xinhua reported.

The incinerators, each of which is capable of processing five tonnes of waste a day, were first used in 2003 during the Sars outbreak.


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-24

Instruments de crémation mobiles

Mise en page

CA-200

Photo

Taux de combustion

Ordinaire 100 kg / heure

Clé de la chambre de combustion

2000 litres

Arbre à fumée extra brûlant

Oui

Réglage de l’alimentation

Guide

Tension

220V

Pouvoir

3,0 kilowatts

Type de carburant

Diesel

Chauffe-eau

Italie Original

Utilisation d’huile (huile diesel)

Normal 53 kg / heure

Dimensions intérieures

230 x 100 x 90cm (chambre à clés)

Dimensions extérieures

290 x 200 x 170 cm (chambre de tour)

Écran de température

Oui

Capacité de conteneur de pétrole (si gaz de pétrole)

500 litres

Ouverture de porte

90 x 90 cm

Taille de l’arbre de fumée

5,0 mètres

Type d’arbre de fumée

Acier inoxydable

Poids brut des gadgets

9000 kg (avec conteneur)

Spécifications techniques de la procédure

Niveau de température de la chambre Paimary

800 ℃ –– – – 1000 ℃

2ème niveau de température de la chambre

1000 ℃ -1200 ℃

Temps de résidence

2,0 sec.

Performances brûlantes

> 98%

Déchets de puissance calorifique inférieure

3000Kcal


Crématorium mobile
HICLOVER – Environnement médical  

Incinérateurs de déchets
Incinérateur de déchets médicaux
Crémation d’animaux de compagnie
Déchets solides   Incinérateur

Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.

22/03/2020

Newsletter – medical waste

Google
medical waste

Medical Waste Incinerators ⋅ 2019年9月30日
www.imcha.net

As far as medical waste was concerned it was being collected by a company. Efforts were being initiated to find a suitable method to dispose the waste …
Facebook Twitter 标记为不相关
查看更多结果 | Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)
Newsletter。

|
RSS 以RSS Feed的形式接收此快讯

发送反馈

Containerized Mobile Incinerator Medical Waste Incinerator Model CA50

HICLOVER – Containerized Mobile Incinerator Medical Waste Incinerator Model CA50


Model

CA50

Picture

Waste Treatment

Medical Waste Incineration Treatment

Feed Capacity

Average 100 kgs per feeding

Burning Rate

Average 50 kgs per hour

Burning Time per Feed

Average 2 hour

Control Mode

PLC(Programmable Logic Controller Incinerator)

Voltage

220V

Power

1.0 Kw

Fuel

Diesel oil

Burner

Italy Burner

Feed Mode

Manual

Temperature Monitor

Digital Display

Fuel consumption (Oil)

Average 16.9 Kgs/Hour

Internal Dimensions

100x80x70cm (Primary Chamber)

External Dimensions

230 x 130 x 155cm (main body)

Waste combustion chamber

560Liters

Post Combustion Chamber

280Liters

Oil Tank Capacity

200 Liters

Door Opening

70 x 50cm

Chimney

5.0M

Gross Weight

4500kgs

Chamber Material

Firebrick ,Refractory Concrete

Max. Heat Value

166,000Kcal/Hr.

Operation Technical Specifications

Solid Chamber temperature

8000C -10000C

Gas Chamber temperature

10000C -12000C

Chamber Anti-Rate

17500C

Residency time

2.0 Sec.

Burning efficiency

>98%

Waste Lower Calorific Power

3000Kcal


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-24

30kgs taux 60kgs huile d'alimentation et brûleur à gaz petit incinérateur de déchets

30kgs taux 60kgs alimentent le mazout et le petit incinérateur de déchets de brûleur à gaz pour l’ Afghanistan

Machine Travail mode

Huile ou alors Gaz + Puissance

Tension

220V

Huile consommation (lit / heure)

Moyenne 13,3lit / heure / chambre

Gaz consommation (NG) (m3 / heure)

16,0 (m3 / heure) (NG)

Gaz consommation (GPL) (m3 / heure)

11,7 (m3 / heure) (GPL)

Brûlant taux

Moyenne 30 kg/heure

Nourrir mode

Manuel

Primaire La combustion chambre

360 litres

Secondaire La combustion chambre

200 litres

La combustion Chambre Matériel

Réfractaire Béton Ciment + brique réfractaire

Interne dimensions

Oui (Primaire chambre)

Externe dimensions

210 x 120 x 210 cm(sans pour autant cheminée)

Porte ouverture

48X 60 cm

Le carburant Taper

Diesel Pétrole / gaz naturel / GPL

Brûleur

Original

Cheminée longueur

13,0 Mètres

Fumée filtre chambre

Oui

Température surveiller

Deux figure Affichage numérique

Température protection

Oui

Huile Char

200 L

Brûlant Efficacité

> 98%

Cheminée taper

Inoxydable acier

1er. température de la chambre

800c– 1000c

2ème chambre Température

1000c– 1200c

Résidence temps

2,0 sec.

Brut poids

4000 kg

Électrique Plastique et lunettes Déchiqueteuse

Oui

Scrubber

Oui

garantie Période

1 année

Primaire la combustion chambre

Oui

Secondaire la combustion chambre

Oui

Incinérateur contrôler Cas

S. acier

Incinérateur cheminée

Original

Le carburant Brûleur

Oui

Huile Réservoir capacité

Oui

Support de stand d’ huile

Oui

Sec Fumée Filtre Chambre

Oui

Ventilateur

Oui

Le total déchets incinération capacité / temps

Le minimum 60 kg

pour le ministère de la Santé publique, Kaboul, Afghanistan

incinérateur pour animaux pour la volaille
vitesse de combustion d’environ 150 kg / h
capacité de charge environ 350 kg.
Incinérateur de déchets municipaux pour un taux de production de déchets de 50 tonnes / jour
Incinérateur de déchets médicaux pour un taux de production de déchets de 200 kg / jour
Incinérateur de déchets médicaux pour un taux de production de déchets de 500 kg / jour
Unité moyenne – pour gérer une production moyenne de déchets de 500 kg / jour et répondre à la capacité
Usine d’incinération à contrôleur PLC automatique avec double brûleur thermique et double chambre.
Capacité de combustion jusqu’à 30 kg par heure.
Filtre à air cyclone pour douche d’eau
Tache moins feuille de qualité en acier 304 pour chambre de lavage à l’eau
Temps jusqu’à 250 minutes.
Circuit de commande électrique entièrement automatique avec minuteries
Température primaire jusqu’à 850 ° C
Température secondaire jusqu’à 1100 ° C
Chargement / déchargement manuel / automatique
Démarrage automatique en cas de panne de courant pendant le processus
Le contrôle automatique d’élévation de température rapide détecte les matériaux à combustion rapide et économise la consommation de carburant du brûleur en éteignant / rallumant automatiquement le brûleur.
Convient aux déchets des hôpitaux
Nombre de brûleur 2 Nos
Tension 440 V 50 Hz
Commande opérationnelle 5 C 60 C Humidité 10 C 90%
Type de carburant Gaz naturel Nombre de chambre 02 Nos

HICLOVER – Environnement médical  

Incinérateurs de déchets
Incinérateur de déchets médicaux
Crémation d’animaux de compagnie
Déchets solides   Incinérateur

Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.

30/06/2020

Малогабаритные инсинераторы мощностью

описание продукта

Компания Nanjing Clover Medical Technology Co., Ltd. является ведущим производителем мусоросжигательных установок в Китае. Мы – местный производитель и один из крупнейших экспортеров Китая. Техническое оборудование пиролитических инсинераторов – это основная обработка отходов во всем мире, включая медицинские отходы, сжигание животных, кремацию домашних животных и другие твердые отходы. Емкость от 10кг / час. До 500 кг / час, до 6 тонн в день. В настоящее время медицинские отходы 4000 ккал / кг, производитель контейнеров для медицинских отходов в Китае, конструкция горелки для медицинских отходов, дизельная горелка для медицинских отходов, фарфор для медицинских отходов, мы поставляем различные серии в соответствии с требованиями местных клиентов и разрабатываем обновленную установку для сжигания отходов с использованием наших передовых технологий. Обновленные конструктивные особенности нашего ассортимента мусоросжигательных печей делают их одними из самых экономичных в мире.

Ключевая особенность:
* Все модели с двойной камерой сгорания.
* Дымоход / дымоход из нержавеющей стали, долгий срок службы. * по заказу
* Высокая температура, длительный срок службы инсинератора.
* Бесплатная или минимальная установка на месте.
* Высокая скорость сжигания, от 10 кг до 500 кг в час, до 6 тонн в день.
* Плоскость управления ПЛК. * по заказу
* Новый дизайн для кремации домашних животных.
* Один год гарантии на инсинератор и запасные части.

Область применения:
1. Больница и клиника: медицинские отходы, инфекционные отходы, перевязочные материалы, биологические отходы, медицина.
2. Бойня, больница для домашних животных и ферма: трупы животных, биоотходы.
3. Сообщество, морской порт и вокзал: твердые бытовые отходы и т. Д.
4. Лаборатории, удаленные районы, операции по оказанию помощи при стихийных бедствиях, кремация животных

Предметы / Модель TS10 (ПЛК) TS20 (ПЛК) TS30 (ПЛК) TS50 (ПЛК) TS100 (ПЛК)
Скорость сжигания 10 кг / час 20 кг / час 30 кг / час 50 кг / час 100 кг / час
Емкость подачи 20кг 40кг 60кг 100кг 200 кг
Режим управления ПЛК ПЛК ПЛК ПЛК ПЛК
Камера сгорания 100л 210л 330 л 560 л 1200L
Внутренние размеры 50x50x40 см 65x65x50 см 75x75x60 см 100x80x70 см 120x100x100 см
Вторичная камера 50 л 110л 180л 280L 600 л
Камера дымового фильтра да да да да да
Режим подачи Руководство по эксплуатации Руководство по эксплуатации Руководство по эксплуатации Руководство по эксплуатации Руководство по эксплуатации
Напряжение 220В 220В 220В 220В 220В
Мощность 0,5 кВт 0,5 кВт 0,5 кВт 0,7 кВт 0,7 кВт
Расход масла (кг / час) 5,4–12,6 7,8–16,3 10,2–20 12.1–24 14–28
Расход газа (м3 / час) 6,2–11,4 8–15,7 9,8–20 9,9–26,1 10–32,2
Монитор температуры да да да да да
Температурная защита да да да да да
Масляный бак 100л 100л 100л 100л 200л
Дверца подачи 30×30 см 45×40см 55×50см 70×55см 80×60 см
Камин 3 метра 3 метра 5 метров 5 метров 10 метров
Тип дымохода Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь
Время проживания 2.0 сек. 2.0 сек. 2.0 сек. 2.0 сек. 2.0 сек.
Вес брутто 1500 кг 2200кг 3000кг 4500кг 6000кг
Внешние размеры 140x90x120 см 160x110x130 см 175x120x140 см 230x130x155 см 260x150x180 см

Containerized Mobile Incinerator Medical Waste Incinerator Model CA50

HICLOVER – Containerized Mobile Incinerator Medical Waste Incinerator Model CA50


Model

CA50

Picture

Waste Treatment

Medical Waste Incineration Treatment

Feed Capacity

Average 100 kgs per feeding< /o:p>

Burning Rate

Average 50 kgs per hour

Burning Time per Feed

Average 2 hour

Control Mode

PLC(Programmable Logic Controller Incinerator)

Voltage

220V

Power

1.0 Kw

Fuel

Diesel oil

Burner

Italy Burner

Feed Mode

Manual

Temperature Monitor

Digital Display

Fuel consumption (Oil)

Average 16.9 Kgs/Hour

Internal Dimensions

100x80x70cm (Primary Chamber)

External Dimensions

230 x 130 x 155cm (main body)

Waste combustion chamber

560Liters

Post Combustion Chamber

280Liters

Oil Tank Capacity

200 Liters

Door Opening

70 x 50cm

Chimney

5.0M

Gross Weight

4500kgs

Chamber Material

Firebrick ,Refractory Concrete

Max. Heat Value

166,000Kcal/Hr.

Operation Technical Specifications

Solid Chamber temperature

8000C -10000C

Gas Chamber temperature

10000C -12000C

Chamber Anti-Rate

17500C

Residency time

2.0 Sec.

Burning efficiency

>98%

Waste Lower Calorific Power

3000Kcal


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-24

fabricant et exportateur d'incinérateurs en Chine

Chambre de combustion primaire
Porte de chargement des déchets: Fourni avec une doublure réfractaire avec des joints d’étanchéité
Porte retirée des cendres: fournie avec une doublure réfractaire avec des joints d’étanchéité
Corps extérieur MOC: acier doux, 5 mm
Chambre primaire: acier inoxydable
Température de fonctionnement: 800. ± 50◦C
Isolation: brique isolante
Type d’éléments chauffants: Kanthal Al Grade
Consommation électrique: 75 KW (charge initiale)
Alimentation électrique: 3 phases 440 volts
Panneau de commande
MOC: acier doux enduit de puissance
Nombre de Temp: Contrôleurs: 2 Nos
Détails: Le panneau de contrôle sera fourni avec un contrat sous forme de relais, commutateurs, indicateurs, etc. Opérationnel sur 3 phases.
IDFan
Type: Type centrifuge
MOC: acier doux
Capacité: 2 HP / 3Phase
Marque du moteur: Kirloskar / Havells / Crompton
Ventilateur d’air de combustion
Type: Type centrifuge
Capacité: 1HP / 3Phase
Marque du moteur: Kirloskar / Havells / Crompton

Capacidad de combustión del incinerador

Información básica.

No. de modelo: incinerador fabricante de China
Mercados de exportación: Global

Descripción del producto

Nanjing Clover Medical Technology Co., Ltd. es un fabricante líder de incineradores de desechos en China. Somos fabricantes locales y uno de los mayores exportadores de China. El equipo técnico de incineración pirolítica es el principal tratamiento de desechos en todo el mundo, para desechos médicos, incineración de animales, cremación de mascotas y otros wste sólidos. La capacidad de 10kgs / Hr. Hasta 500kgs / Hr., Hasta 6ton por día. Incineradores sanitarios, calor de combustión de cerdo, incineración de cadáveres, incenaración de heroína, quema de gestión de residuos de heroína, hipo, solución de incinerador de alta tecnología. La característica de diseño actualizado de nuestra gama de incineradores los convierte en uno de los más rentables del mundo.

Características principales:
* Todos los modelos con doble cámara de combustión.
* Chimenea / chimenea de acero inoxidable, larga vida útil. * según pedido
* Alta temperatura, larga vida útil del incinerador.
* Instalación gratuita o mínima en obra.
* Alta velocidad de combustión, de 10 kg a 500 kg por hora, hasta 6 toneladas por día.
* Plano de control PLC. * según pedido
* Nuevo diseño para el negocio de cremación de animales de compañía.
* Garantía de un año en incinerador y piezas en stock.

Ámbito de aplicación:
1. Hospital y clínica: Residuos Iátricos, Residuos Infecciosos, Vendajes, Biorresiduos, Medicina.
2. Matadero y hospital y granja de mascotas: animal muerto, biorresiduos.
3. Comunidad, puerto y estación marítima: residuos sólidos urbanos, etc.
4. Laboratorios, ubicaciones remotas, operaciones de socorro en casos de desastre, cremación de animales

Artículos Especificación
Modelo YDC YD-10C / YD-20C / YD-30C / YD-50C
Lista de productos principal Cámara de combustión primaria
Cámara de combustión secundaria
Mezclar la cámara de combustión
Cámara de filtro de humo
Caso de control común del incinerador
Chimenea de acero inoxidable
Quemador de gasoil / gas Italia: 02 unidades
Tanque de aceite (si es combustible de aceite)