Burning capacity 50kg/hr with wet scrubber with dual fired burner

This model is small-scale waste incineration equipment for small waste output.
Construction is dual/double combustion chamber with 02 units oil/gas burner.
Waste feed chamber is around 900Liters (0.9m3, YD-50). Primary & Secondary
combustion chambers and included mix-combustion chamber. Waste load on the
bottom of chamber. Incinerator panel control suit for local operation.

Model YD-50 with wet scrubber

Burning Rate Average 50 kgs/hour
Feed Capacity Average 100 kgs
Primary Combustion Chamber 900 Liters
Secondary Combustion Chamber 200 Liters
Mix Combustion Chamber Yes
Smoke Filter Chamber Wet Scrubber(WashingTower)
Feed Mode Manual
Voltage 220V
Power 7 Kw
Fuel Type Diesel Oil/ Natural Gas/LPG
Burner Italy Original
Oil Consumption (Diesel Oil) 16.9 kg/hour
Gas Consumption (Natural Gas) ***
Internal Dimensions 120x90x85cm (primary chamber)
External Dimensions 400x200x230cm (without chimney)
Temperature Monitor Yes
Oil Tank Capacity(if oil fuel) 300 Liters
Door Opening 62 x 68cm
Chimney Length 5.0 Meters
Chimney Type Stainless Steel
Equipment Gross Weight 6000 kgs
Operation Technical Specifications
Primary Chamber Temperature 800℃–1000℃
Secondary Chamber Temperature 1000℃-1200℃
Residency Time 2.0 Sec.
Burning Efficiency >98%
Waste Lower Calorific Power 3000Kcal