Incinerator YD-150 with Stainless Steel Wet scrubber-Cooling Spray tower

Model YD-150
Burning Rate Average 150 kgs/hour
Feed Capacity Average 300 kgs/feeding
Primary Combustion Chamber 1500 Liters
Secondary Combustion Chamber 500 Liters
Mix Combustion Chamber Yes
Smoke Filter Chamber Yes
Feed Mode Manual
Voltage 220V/380V
Power 1.03Kw
Fuel Type Diesel Oil/ Natural Gas/LPG
Burner Italy Original
Oil Consumption (Diesel Oil) 17–36 kg/hour
Gas Consumption (Natural Gas) 11–36.7 m3/hour
Internal Dimensions 150 x 100 x 96cm (primary chamber)
External Dimensions 240 x 170 x 380cm (without chimney)
Temperature Monitor Yes
Oil Tank Capacity(if oil fuel) 300 Liters
Door Opening 59 x 81cm
Chimney Length 10.0 Meters
Chimney Type Stainless Steel
Equipment Gross Weight 7500 kgs

before start the 2nd burner, full close all air valve on the 1st chamber. other operation keep same.

reason: at the first 10-20 min burnning the plactic waste, deflagration combustion in the chamber.

after 10-20 min, gradually increase air injection by air valve on the 1st chamber.

meanwhile, proposal 20-30 min burnning of the 1st chamber, stop the 1st burner(stop fire only, the fan inside the burner
still working), let the plastic burn itself(Spontaneous combustion) to save diesel oil.

a small waste to energy project to turn municipal solid waste

Model YD-150
Main Product List Primary Combustion Chamber
Secondary Combustion Chamber
Mix-Combustion Chamber
Smoke Filter Chamber(Dry Scrubber)
Incinerator Control Case(PLC Auto.Type)

*(upgrade to Stainless Steel, free cost)

Italy oil/gas burner: 02 sets
Oil Tank (if oil fuel): 300Liters
Optional Part:

Stainless Steel Wet scrubber(Cooling Spray tower)

into electricity. The project is to cater for a local council with a population of around 60,000 people and will serve as a

pilot project. If project is successful than other such plants will be installed in other towns and villages. The villages

will all cater for the MSW in their locality instead of a central large incineration plant to cate for the whole county.for a 7 ton per

hour plant on turn-key basis with your best price and delivery including full technical specifications, literature, drawings

and best export price.

Provided you can offer a good solution there is a chance of selling many more such plants for the local councils of the same

country, so this is an excellent chance for you to join forces with our company for market penetration with your products in


1. TS100 model with dry scrubber system
2. YD150 with a wet scrubber system

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

Tel: +86-25-8461 0201
Mobile: +86-13813931455(whatsapp/wechat)

Nanjing Clover Medical Technology Co.,Ltd.