Tag: waste incinerators

Capacity Not much less than 500Kg/hr. Procedure 24hr-7days/ week continuous operation. Burning chamber 2 burning chamber. Temperature. Burning chamber 800-1000 C. Secandry combustion burning 1000-1200 C, with the possibility to be updated to 1400 C. Burning Performance Effectiveness 99.99%. Retention time Of the flow gases not much less than 2 Sec in the hot component. […]

1    Basic Plant Design    An approved plant must have four distinct sections that demonstrate three principles of Turbulence, Residence Time and Temperature are inbuilt in the plant design .The regulated sections may include but not limited to: Overall plant layout. Feed chamber/ charging Primary Combustion Chamber. Secondary Combustion Chamber. Particulate Scrubbers Acid Gas Scrubbers The […]

and forced air exhaust stacks (or chimneys).   The charging system shall consist of, as a minimum, a hopper for top feeding and mechanically operated hydraulic   charging ram or augur. To prevent warpage or excessive thermal expansion, a charger cooling system using either   air or water shall be provided.   Primary combustion chamber […]

the complying with containerized burners. (Kitchen location as well as accommodations and grey water and black water plant eliminating waste) we need burner is each function various are done in one heater we require notified. WASTE HEATERS SUGGESTIONS china clinical burner Capability ? Disposal of both non-hazardous as well as infected products streams (per waste […]

waste burner manufacturer china, Waste chamber Chamber capability 300 kg Chamber quantity.54 m3. Chamber dimension (exterior) Dimension: 91cm, Altitude: 86cm Size: 152cm. Door opening 66 x 76 centimeters. Elevation to door 84 centimeters. Height to top of stack 5.4 m. Suggested piece size (L x W x Density) 1.8 m x 2.4 m x 10 […]

Technical requirements for shedding gadget, animal waste incinerator supplier 1. 2 systems are required to be mounted in the south of the Kingdom of Saudi Arabia. Both systems will be utilized by tailored authority to melt various kind of medications. All need gadgets require to be given. 2. Warranty: booth systems need to be supplied […]

Secondary combustion chamber shall be either the rotary- or stationary-hearth (or kiln) type incinerator designed to   oxidize (or burn) the organic vapors and gases. Burner and combustion air controls shall be fully automatic Diesel incinerator of 25Kg / h     Box Box dimensions of the incinerator.   Approx Width: 900 mm Approx: 1000 […]

Technical specification for burning machine,animal waste incinerator manufacturer 1.Two systems are required to be installed in the south of the Kingdom of Saudi Arabia. The two systems will be used by custom authority to burn different kinds of drugs. All need equipment must be provided. 2.Warrantee:  booth systems must be provided with 3 years warrantee […]

medical waste incinerator china, Design, supply and manufacture ex works of one Surefire Manual Load TS50/1 Medical/General waste incinerator as detailed below: – ·         Waste type: Mixed type o,1,2,3,&4 hospital/clinical bio hazard waste ·         Waste density: 125 to 350Kg/M3 ·         Waste CV: 4000 KCAL/kg ·         Moisture content: 10-25% ·         Estimated ash residue: 5-10% ·         Nominal […]

In a simple design with a metal steel drum electric. including: A cage for receipt of biomedical waste; A combustion chamber with fireplace with a filter to retain ashes; A cover; An air supply; A turbine  allowing the supply of the air. Combustion temperature: 1800 ° C. Compliance with European standards. Comes with all necessary […]