Blog

burners at 3 centers to improve medical care waste


a. 2.5 statistics tons daily healthcare waste burner

b. 1.5 statistics stacks per day healthcare waste heater

c. 300 kg per day medical care waste heater

Our recommended technology is double-chamber incineration, but if you recommend a different modern-day technology, that is acceptable.

We request information on the adhering to for each of the above needs:

1. Resources expense (offered expense in Oman)

2. Operation in addition to upkeep costs (yearly)

3. Number of motorists asked for

4. Item specs (dimensions, temperature level degrees, home time, cycle time etc)

5. Numerous various other complementary equipment that is needed or advised by you


CONTAINERIZED HEATER FOR INCINERATING HAZARDOUS AND ALSO NON HAZARDOUS WASTES


CONTAINERIZED BURNER FOR INCINERATING HAZARDOUS AND NON HAZARDOUS WASTES (BOTH DOMESTIC In Addition To INDUSTRIAL) AT A MINIMUM COST OF 300KG/HR WITH THE ABIDING BY DEMANDS:

Ø PRIMARY CHAMBER VOLUME 7.2 M ³

Ø BURNING CAPABILITY 300Kgs/hr.

Ø PRIMARY CHAMBER TEMPERATURE LEVEL 850 ⁰ C AND ALSO SECONDARY CHAMBER TEMPERATURE LEVEL 1100 ⁰ C

Ø REFRACTORY THICKNESS 225MM; REFRACTORY WITHSTAND TEMPERATURE 1400 ⁰ C

Ø RAM LOADER CAPACITY 0.75 M ³; FUNCTIONAL CYCLES EVERY DAY 8-16 Humans resources.

Ø GAS DIESEL/NATURAL GAS; RANGE OF PRIMARY BURNERS & & & & RATING: 2 @ 250kw

Ø VARIETY OF SECONDARY BURNERS & & & & POSITION: 2 @ 400kw; ELECTRIC SUPPLY 230V 60Hz

Ø CONTAINER TIPPER, MONITORING SYSTEM, CLEANSING SYSTEM

Ø GAS CLEANING AND ADDITIONALLY GAS MONITORING.MSW1000 General Medical Waste Incinerators melt price roughly 100kg/hr
A2400 Pet/ fowl Waste Incinerators melt rate as high as 200kg/hr. Laboratory waste Monitoring system
01. Liqued water purification system.
02. 03.
Momentary alloted area for purifications system- 30×× × × 20.
The following requirement to be suggesting in the biding document.
1. Strategy of removing treated drainage.
2. Technique of dealing with the sludge.
Duration for building and construction.
5. For the entire task.
6. Guarantee period in addition to maintaincne.


Отходы, которые можно плавить или сжигать

отходы сами по себе, проблемы с работой в камере сарая (например, степень температуры, время выдержки, а также нарушения), а также

возможность автомобилиста. Отходы, содержащие хлорированные материалы (т.е. хлорированные

растворители и пластмассы, трубы из ПВХ, пиломатериалы, обработанные пентахлорфенолом или краской с добавлением ПХБ, коряги для воды)

должны быть отделены от других отходов, поскольку их сжигание обязательно приведет к развитию de novo, а также к истощению множества

диоксин, а также фурановые вещества. Различные другие отходы, которые не следует терять, если не используются специально созданные

В мусоросжигательных установках используется смазочное масло, почва, загрязненная углеводородами, биомедицинские отходы, канализационный отстой или любой другой вид мусора.

другие отходы, особо ограниченные Министерством окружающей среды.

растворители и пластмассы, трубы из ПВХ, древесина, обработанная пентахлорфенолом или краской с добавлением ПХБ, коряги для морских судов)

должны быть отделены от различных других отходов, поскольку их сжигание обязательно приведет к развитию de novo, а также к истощению различных

диоксиновые и фурановые соединения. Отходы, включая ртуть (например, батареи, термостаты, а также люминесцентные лампы), а также

различные другие тяжелые металлы (например, свинцово-кислотные батареи, древесина, обработанная свинцовой краской) не должны сжигаться, так как ртуть

а также тяжелые стали не испортятся. Другие отходы, которые нельзя сбрасывать, кроме специально разработанных

установки для сжигания отходов состоят из смазочного масла, почвы, загрязненной углеводородами, биомедицинских отходов, канализационного ила или любых других материалов.

другие отходы, специально запрещенные Отделом окружающей среды.

В таблице 2 приводится список типичных отходов, которые могут быть сброшены, и тех, которые требуют особого учета и

терапия. Обратите внимание, что открытое сжигание и сжигание признаются отдельными столбцами в таблице, которые

В зависимости от используемого подхода применяются различные ограничения. В общем, гораздо больше ограничений связано с

различные методы открытого сжигания из-за достигнутого неполного сгорания. Меньше ограничений наложено

сжигание в результате способности оператора контролировать процесс сжигания.

Негорючие продукты, такие как сталь, а также стекло, не горят, а также отнимают тепло у отходов, которые могут быть

разрушены горением. Легковоспламеняющиеся отходы необходимо всегда отделять от негорючих перед загрузкой.

в плавильную камеру.

Capacité de combustion 50 kg / h avec épurateur humide avec brûleur double

Ce modèle est un équipement d’incinération de déchets à petite échelle pour la production de petits déchets.
La construction est double / double chambre de combustion avec 02 brûleurs fioul / gaz.
La chambre d’alimentation des déchets est d’environ 900 litres ( 0,9 m 3 , YD-50). Primaire secondaire
chambres de combustion et chambre de mélange-combustion incluse. Charge de déchets sur le
fond de chambre. Combinaison de contrôle de panneau d’incinérateur pour opération locale.

Modèle

YD-50 avec épurateur humide

Photo

Taux de combustion

50 kg / heure en moyenne

Capacité d’alimentation

100 kg en moyenne

Chambre de combustion primaire

900 litres

Chambre de combustion secondaire

200 litres

Mélanger la chambre de combustion

Oui

Chambre de filtre à fumée

Épurateur humide ( La lessive La tour )

Mode d’alimentation

Manuel

Tension

220V

Pouvoir

7 Kw

Type de carburant

Huile diesel / gaz naturel / GPL

Brûleur

Italie Original

Consommation d’huile (gasoil)

16,9 kilogrammes /heure

Consommation de gaz (gaz naturel)

***

Dimensions internes

120 x 90 x 85 cm (chambre primaire)

Dimensions extérieures

400 x 200 x 230 cm (sans cheminée)

Moniteur de température

Oui

Capacité du réservoir d’huile (si carburant d’huile)

300 litres

Ouverture de porte

62 x 68 cm

Longueur de la cheminée

5,0 mètres

Type de cheminée

Acier inoxydable

Poids brut de l’équipement

6000 kilogrammes

Spécifications techniques de fonctionnement

Température de la chambre primaire

800 ℃ – -1000 ℃

Température de la chambre secondaire

1000 ℃ -1200 ℃

Temps de résidence

2,0 sec.

Efficacité de combustion

> 98%

Déchets de puissance calorifique inférieure

3000Kcal



Incinérateurs de déchets
Incinérateur de déchets médicaux
Crémation d’animaux de compagnie
Déchets solides   Incinérateur

Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.

dispose Medical waste IV


the incinerator can be made use of to do away with Clinical waste IV, used needles, utilized syringes, scalpels, made use of dressing product, private security gadgets like gown, gloves and so on truncated body components, excreta from clients and also various other research laboratory waste.incineration tools that can deal with a mix of clinical as well as contaminateds materials. The professional wastes contain (yet are not restricted to) products polluted with blood, physical liquids, feces, as well as additionally human tissue/organs from medical treatment. The dangerous substances include (however are not restricted to): xylene, toluene, chloroform, methylene chloride, trichloroethylene, acetonitrile, formaldehyde wastes, radiation treatment wastes (e.g., Chlorambucil, Cytoxin, Daunomycin, and more) radiology wastes (e.g., glutaraldehyde), as well as mercury-containing compounds.includes dismembered body components, body fluids consisting of polluted blood, blood products, excreta from people, cultures of communicable infections along with different other research laboratory wastes e.t.c.
Medical might also contain made use of needles, taken advantage of syringes, taken advantage of, ended or infected clothes items like plastics, plasters and plasters, e.t.c. The Burners ought to also allow disposal of other wastes created in medical care facility environment.Technical Needs for Portable Incinerators

The Chamber quantity of around 0.37 m3 and likewise a.
1 combustible lots amount (amount of product) of.

around 0.30 m3

2 Burner power of around 189,000 kcal/hour.
Optimum Burning Temperature level Level of approximately 1250

Degree Celsius.
Type of sent Gas: Inert as well as absolutely no ecological air pollution impact.
Electric Power: 220V/50 or 60 Hertz

Gas: Diesel

Electric consumption of approximately: 0.35 kw/hr

Gas usage selection: 7 – – – – 11 ltrs/hr

Controls: Burner control consisting of control board, timer, display screen for watching on combustion temperature level, system blunder present screen, and more
. Packaging/Installation: Heater totally established in addition to prepared to be linked in power source

Customer’s handbook: Bundle needs to be supplied user’s hands-on including defined info to installation, procedure, upkeep, analysis of issue shooting signals and also get in touch with telephones. numbers/emails of neighborhood or abroad provider’s specialists that can be required assistance on treatment of the gadgets, if needed.

training guide/manual on a cd consisting of a demonstration for installation, operation and also. maintenance, in addition to security criteria, etc.

Range of Supply: Package requires to be supplied consisting of. all the called for devices for installment as well as likewise must. contain spare parts/consumables that are required for a. one year period at a burning price of about 8 hrs. daily

Warranty need to be provided for a 5-years duration. starting with the heater’s arrangement and. including the arrangement of devices along with.
consumables


Especificación de Instalación y Puesta en Marcha de Residuos Inci

Información básica.

Modelo NO .: incineradores de pequeña escala incineradores de pequeña escala
Mercados de exportación: Global

Descripción del producto

El incinerador es un equipo de incineración, quema directamente los desechos mediante gas combustible o combustible oi. Como circunscripción diferente, incinerador se puede nombrar muchas palabras como se muestra a continuación:

Capacidad de tratamiento: incinerador de pequeña escala, incinerador de gran escala y pantalón de incineración.
Material de desecho: incinerador de desechos municipales, incinerador de desechos médicos, incinerador de cremación de animales, incineradores humanos
Combustible del incinerador: incinerador de gas, incinerador de petróleo
Conversión de residuos en energía (WTE): incinerador WTE, incinerador sin WTE
Fabricante de incineradores: fabricante de incineradores de China, fabricante de incineradores de Reino Unido, fabricante de incineradores de EE. UU., Fabricante de incineradores de India.
Famosa empresa fabricante de incineradores: Inciner8 (Reino Unido), Clover Incinerator (China), Pennram (EE. UU.), Haat (India)
Velocidad de combustión: 5 kg / hora, 10 kg / hora, 15 kg / hora, 20 kg / hora, 30 kg / hora, 50 kg / hora, 100 kg / hora, 150 kg / hora, 300 kg / hora, 500 kg / hora

La técnica de incineración pirolítica es una forma tradicional de tratamiento de residuos durante muchos años. En todo el mundo, en muchos países, las personas se oponen al incinerador porque el incinerador producirá una gran cantidad de dioxinas en el humo. “Dioxinas” se refiere a un grupo de compuestos químicos tóxicos que comparten ciertos equipos de cremación química para fabricantes de desechos médicos, cremator 50 kg / h, equipo crematorio, fabricante crematorio, incinerador de animales muertos, incinerador de animales muertos, estructuras y características biológicas. Las dioxinas pueden liberarse al medio ambiente a través de incendios forestales, quema de basura en el patio trasero, ciertas actividades industriales y residuos de la quema comercial de desechos en el pasado. Las dioxinas se degradan muy lentamente y todavía existen en el medio ambiente liberaciones pasadas de dioxinas de fuentes naturales y artificiales. De todos modos, tenemos que recordar que este es un pantalón de incineración a gran escala, generalmente más de 30 toneladas por día. Este es un problema social, para analizar y sugerir caminos en diferentes ángulos desde el público, gobierno, desarrollo económico, protección ambiental, desarrollo tecnológico, etc.

Entonces, ¿por qué todavía usamos incinerador?
Primero, para los desechos médicos del hospital, los incineradores pirolíticos son el mejor tratamiento hasta ahora. La tecnología pirolítica puede matar el virus, controlar la contaminación.
En segundo lugar, para el cuerpo humano, los animales de compañía, en muchos países y regiones, deseamos incinerarlos. Esta es la ceremonia en el proceso de desarrollo de la sociedad, y ceremonias para conmemorar la desaparición de la vida.

Como las dos razones anteriores, pero no solo las anteriores, todavía usamos incineradores.

¿Cómo puede encontrar un incinerador razonable para su sitio local?
El incinerador no es un equipo barato, generalmente el precio del modelo a pequeña escala es de alrededor de $ 5, 000 USD por unidad y el precio del modelo a gran escala más de $ 50, 000 USD por unidad. Por lo tanto, antes de comprar una unidad de incinerador, debe dejar en claro los siguientes elementos:
A, quemar qué? El incinerador es un equipo de incineración, la función es el desperdicio del fuego. Entonces, ¿qué tipo de residuos desea tratar?
B, ¿pequeño o grande? Esto de acuerdo con la producción de desechos todos los días o el volumen de desechos por tiempo de alimentación, como el tamaño del animal.
C, combustible? El incinerador utiliza combustible de petróleo o gas, en general, el combustible de gas es más barato que el petróleo y el humo más limpio que el modelo de combustible de petróleo. Pero algunos sitios locales no tienen sistema de suministro de gas.
Y otros elementos tecnológicos, como energía (220V, 380V), tipo de puerta de alimentación de desechos, estructura del incinerador, etc.

Después de aclarar estos, puede ir a buscar fabricantes locales o internacionales, preguntar precios, especificaciones técnicas y, en última instancia, comprar los productos adecuados.

Artículos / Modelo TS10 (PLC) TS20 (PLC) TS30 (PLC) TS50 (PLC) TS100 (PLC)
Velocidad de combustión 10 kg / hora 20 kg / hora 30 kg / hora 50 kg / hora 100 kg / hora
Capacidad de alimentación 20 kg 40 kg 60kg 100 kg 200 kilogramos
Modo de control SOCIEDAD ANÓNIMA SOCIEDAD ANÓNIMA SOCIEDAD ANÓNIMA SOCIEDAD ANÓNIMA SOCIEDAD ANÓNIMA
Cámara de combustión 100L 210L 330L 560L 1200L
Dimensiones internas Los 50x50x40cm Los 65x65x50cm Los 75x75x60cm El 100x80x70cm El 120x100x100cm
Cámara secundaria 50L 110L 180L 280L 600L
Cámara de filtro de humo sí sí sí sí sí
Modo de alimentación Manual Manual Manual Manual Manual
Voltaje 220 V 220 V 220 V 220 V 220 V
Energía 0,5 Kw 0,5 Kw 0,5 Kw 0,7 kilovatios 0,7 kilovatios
Consumo de aceite (kg / hora) 5,4-12,6 7,8–16,3 10.2-20 12.1-24 14-28
Consumo de gas (m3 / hora) 6.2-11.4 8-15,7 9,8-20 9,9-26,1 10–32,2
Monitor de temperatura sí sí sí sí sí
Protección de temperatura sí sí sí sí sí
Tanque de aceite 100L 100L 100L 100L 200L
Puerta de alimentación Los 30x30cm Los 45x40cm Los 55x50cm Los 70x55cm Los 80x60cm
Chimenea 3 metros 3 metros 5 metros 5 metros 10 metros
Tipo de chimenea Acero inoxidable Acero inoxidable Acero inoxidable Acero inoxidable Acero inoxidable
Tiempo de residencia 2,0 seg. 2,0 seg. 2,0 seg. 2,0 seg. 2,0 seg.
Peso bruto 1500 kg 2200 kg 3000 kg 4500kg 6000 kg
Dimensiones externas El 140x90x120cm El 160x110x130cm El 175x120x140cm Los 230x130x155cm Los 260x150x180cm

medical waste PYROLYTIC INCINERATOR


TECHNICAL DEMANDS: PYROLYTIC BURNER

Parameter Compliance
Type of Waste To treat medical waste, categories A,B,C,D,E
Type of Incinerator Pyrolytic
Nominal Burn rate 50 t0 60 kg/ hr at 3500Kcal/Kg
Loading Manual, Batch Load
De Ashing Automatic or Manual batch de ashing
The incinerator must avoid the release of black smoke and fine dust during the loading
Primary chamber capacity 2-3 m³
The insulation   of the combustion chamber should be composed   of refractory bricks, having a higher content of aluminium and insulates,
The plate of combustion in carborundum avoiding the fixing of glass and slags
Hours of operation /Day >10 hrs
Max Operating Temperatures 1400 °C
Normal Operating Temperatures(Primary) >850 °C
Operating Temperature(Secondary) >1100 °C
It should have digital temperatures regulator( Temperatures regulator in digital watch)
Carbon content of ashes <2%
The installation should be completely free from visible smoke as well as offensive odours
Residence time in second chamber 2 second minimum
The internal diameter of the Chimney :Ø 400
Height of stack >8m
Burner operation Automatic On/Off
Fuel Diesel
Fuel consumption at raed capacity >7kg waste /ltr
Electricity consumption <2kW at rated capacity
Operating Voltage 220 – 240V AC 50Hz
Spare parts Supply for 1 year quoted as option
Consumables Supply for 1 year of operation to be mentioned as option
Warranty Parts and service support: 1 year minimum post comissioning
Service support <72 hours
Emission standard Compliance BS3316 or equivqlent standard
Process filtering system Scruber to be mentioned as option
CE Manufacturing Compliance BS EN 746-2-1997
Design Specification Type A,B,C,D,and E of medical waste
Installation and Comissioning Included in condition of supply
Training in preventive and curative maintenance and use of the incinerator Operator training inclusive in offer
Capacity to treat Plastic Not less than 40% by weight


Top Feeding Door Solid Waste Incinerators HICLOVER

HICLOVER Top Feeding Door Waste Incinerators

▲▲▲Large Feeding Door
▲▲▲Better for Animal Waste Cremation
▲▲▲HICLOVER Brand Section

***Primary Combustion Chamber
***Secondary Combustion Chamber
***Smoke Filter Chamber
***Optional Wet Scrubber System(1 section or  3 sections)

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/ 

Nanjing Clover Medical Technology Co.,Ltd.

Items Side Loading Door Top Loading Door
Cost Cheap High cost
Manufacture Tech. Easy A litter difficult
Safty safe safer
Incinerator Shape L/ I L 
Loading manual big door can be by Forklift
Land occupation small big
Ash door same with feeding door or alone alone
market share Most-CHINA/USA/INDIA Few- UK/USA
Dooring open type Manual Pry bar/Hydraulic pressure
Dooring Open size small big
Better for medical bag waste animal waste
open when burning safer, can feed waste, few smoke not safe, cannot feed waste, most smoke



parts of an incinerator
physical method of disposing hazardous chemical waste
portable incinerators types
proper ways of waste disposal in the community
questionnaire to ask about incinerators for collection of data

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

 

2020-08-07

Taux de combustion de 100 à 150 kg avec combustion secondaire à utiliser à l'hôpital

Réservoir d’huile d’une capacité de 2000 litres

Articles / modèle

TS150 (API)

Photo

Principe

Traitement Incinération des déchets

Taux de brûlure

Moyenne 100 -150 kilogrammes /heure

Capacité d’alimentation

Moyenne 750 kg /alimentation

Mode de contrôle

PLC (Incinérateur à contrôleur logique programmable)

Corps principal en acier

8 mm épaisseur

Matériel de chambre

Mur de briques réfractaires à haute alumine, 1750 ℃ Taux

Peinture pour le visage extérieur

800 ° C Taux

Chambre de combustion

1570 L

Dimensions internes

150 x 100 x 105 cm

Chambre secondaire

750 L

Chambre de filtre à fumée

Oui

Mode d’alimentation

Manuel

Tension

210 / 230V 50 / 60Hz

Pouvoir

0.9Kw

Consommation d’huile (litre / heure)

Moyenne 14 (DO)

Consommation de gaz (m3 / heure)

***

Moniteur de température

Affichage numérique

Protection de la température

Oui

Cuve à mazout

300 L

Porte d’alimentation

80x 60 cm

Cheminée

10 mètres

Type de cheminée

Acier inoxydable

1er. Température de la chambre

800 ℃ – -1000 ℃

2ème. Température de la chambre

1000 ℃ -1200 ℃

Temps de résidence

2,0 sec.

Poids brut

8500 kg

Dimensions extérieures

300 x 160 x 280 cm (sans cheminée)


Incinérateurs de déchets
Incinérateur de déchets médicaux
Crémation d’animaux de compagnie
Déchets solides   Incinérateur

Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.

WASTE BROCHURES In Addition To CONTAMINATED PRODUCTS LIST


1 Burner 30 =KG burn/h as well as also it need to have a Scrubber.

2 Heater ought to have Electric Plastic Shredder for reducing of glass container, surange of Drug.

3 Heater need to have Electric Auto Clave or Microwave for Dis Infection individually with burner.
4 Incinerator requires to have Double Chambers initially Chamber ought to given 800C temperature level as well as additional Chamber functioning 1200C temperature degree.
5 Incinerator in out place have to have a Specification to reveal internal temperature degree of incinerator.
6 Heater needs to operate in 2 systems Electric and also gas discuss in which kind of fuel jobs.
Note we want it services gas as well as also electrical also.for a little pig slaughterhouse job in Vietnam we are searching for a.
service to ruin safely inedible as well as taken family pet things.

As the slaughtered pigs are consumed by greater than 90% (from unguis to.
head, blood, etc) the waste volume is rather small likewise in.
slaughter-points with as long as 100 slaughtered pigs daily.

Although making use of meat as well as additionally bone meal is not banned in Vietnam the.
tiny amounts of waste do not seem to necessitate the installation of a.
providing system, not additionally of a batch cooktop, so incineration seems to be.
the very best choice.

I desire to get back at a lot more technical details e.g. gas use for.
blazing 100/200 kg of animal items each day as well as additionally the FOB.
price of the unit.The kinds of waste to be dealt with are (after EUROPEAN WASTE PAMPHLETS AND ALSO CONTAMINATED PRODUCTS CHECKLIST, 2002):

18 01 01 sharps (other than 18 01 03)

18 01 02 body elements and also body organs including blood bags as well as likewise blood keeps (other than 18 01 03)

18 01 03 * wastes whose collection and additionally disposal goes through unique needs to avoid infection

18 01 04 wastes whose collection as well as disposal is not subject to one-of-a-kind requirements in order to secure versus infection (for instance dressings, cast, linen, non reusable clothes, infant diapers)

18 01 06 * chemicals consisting or including of risky compounds

18 01 07 chemicals besides those mentioned in 18 01 06

18 01 08 * cytotoxic in addition to cytostatic drugs

18 01 09 drugs apart from those talked about in 18 01 08

18 01 10 * amalgam waste from dental therapy