Incinerator double chamber with capacity 1.5 m3/batch or 6 m3/ day, digital thermocontrol array 0‐1200
C, thermocouple, air supply capacity 10m3/ min, power use 1.2 kWH/ hr, power 3
stage with netral, cooling water sprinkler ability 5L/ minute, finished with refractory (insulation,
castable, ceramic covering) and also PLC
SUPPLY, INSTALLMENT In Addition To COMMISSIONING OF WASTE HEATER– – TECHNOLOGICAL SPECIFICATIONS
The Waste Incinerator is developed to melt Type IV of pathological waste as well as contagious, contaminated “red bag,” surgical
dressings, plastic exam gadgets as well as also numerous other wastes.
General Specifications
Burner: 2 heating units (key heating unit in addition to 2nd heater).
Fuel: Oil.
Capability (Cubic Mtr): 0.65.
Ave Capacity: 60 kg per hr.
Gas Consumption (ltrs/ human resources):13.
Outside Measurements.
Size (mm): 2300.
Size (mm): 1220.
Elevation Incl. Flue (mm) 7000.
Door Opening (mm) 610 x 710 610 x 710.
Procedure.
Minutes. Running Temperature degree: 950.
Max. Running Temperature level: 1320.
Residency Time in Secondly Chamber: 5 sec.
Temperature Level Monitoring: YES.
Various various other details.
Easy and also safe operation.
Massive counter-balanced fill door with electric lockout.
Automatic control system offers predetermined close and thaw times down.
When it is time to recharge, Reload light shows to driver.
Be needed for fatigue of last cost.
Low power use degrees.
Programmable electronic temperature level controls preserve temperature level, ensuring complete combustion while saving fuel.
Tension blower with managing air control develops disturbance along with disperses melting air to additional chamber.
2nd heating unit with temperature triggered modulating control offers quickly preheat as well as maintains heat
efficiency at low power usage levels.
Billing cost