250kgs per hour capacity waste incinerator

Items/Model	TS200(PLC)
Picture
Principle	Solid Waste Incineration Treatment
Burn Rate	Average 250 kg/hour
Feed Capacity	Average 350kg/feeding
Control Mode	PLC(Programmable Logic Controller Incinerator)
Combustion Chamber	1800L
Internal Dimensions	150x110x110cm
Secondary Chamber	750L
Smoke Filter Chamber	Yes
Feed Mode	Manual
Voltage	220V
Power	0.9Kw
Oil Consumption (kg/hour)	Average 28
Gas Consumption (m3/hour)	Average 33.6
Temperature Monitor	Digital Display
Temperature Protection	Yes
Oil Tank	300L
Feed Door	80x60cm
Chimney	10Meter
Chimney Type	Stainless Steel
1st. Chamber Temperature	800℃–-1000℃
2nd. Chamber Temperature	1000℃-1200℃
Residency Time	2.0 Sec.
Gross Weight	8500kg
External Dimensions	300x160x190cm

Burner operation should be Automatic On/Off

Fuel : diesel

The supplier must provide  necessary information for the best of  the installation

This incinerator with “PYROLYTIC” combustion must have:

;

・ Refractory concrete :

§ . Thickness : ≥100 mm

§ . Nature: 42% of Al203

・ Insulate in fibrous panels :

§ . Thickness: ≥75 mm

・ Nature: Calcium silicate.

* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.

* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.

 

A chamber of post combustion of gases

* A burner of combustion of gases,

* A device of injection of air allowing a total recombustion of gases,

* A device of air inlet of cooling of waste gases,

* A sheath of evacuation of the gases burnt.

* Carcass in strong sheet steel with support of connection.

* Composition of the refractory;

・ Refractory concrete :

§ Thickness : ≥150 mm

§ Nature: 65% of Al203

・ Insulate in fibrous panel :

§ Thickness: ≥85 mm

 Nature: Calcium