Blog

fournisseurs de brûleurs

fournisseurs d’incinérateurs 7) Coût de combustion: 15 – – – – 20 Kg / h 8) Capacité: très peu moins de 130 L.
9) Concentrations de nombreux contaminants dans les gaz en tas énumérés ci-dessous les limites de découverte.
10) Essence.
11) Contrôle du système électronique.
12) Facile à exécuter et très peu d’entraînement.
13) Tout type d’outil ou de gadget dédié requis pour les performances appropriées et l’utilisation supplémentaire des outils inclus.Incinérateur déchets cliniques diesel, bâtiment et construction en acier peint en aluminium léger résistant à l’échauffement, contrôle de l’appareil

flamme d’indication, indicateur de rechargement, gadget de contrôle du niveau de température, capacité de chute de 250 kg / 10 ressources humaines en 2 étapes

(caméra vidéo clé ainsi qu’une caméra vidéo numérique supplémentaire). Un radiateur à installer dans un hôpital universitaire de 440 lits architecturaux ainsi que 375 lits de gestion. Cette unité de chauffage doit avoir la capacité de perdre de 180 à 220 kilos par jour de déchets cliniques et de déchets naturels.
2. Une unité de chauffage pour faire fondre le médicament épuisé qui peut incinérer environ 500 kg de médicaments ou environ 4000 kg de médicaments sortis par jour. pour avoir un outil pour flamboyer et de même ne pas les placer dans la décharge. – Hôpital universitaire national de Muhimbili.
– – Centre de santé régional de Kigoma.
– – Hôpital universitaire Ndanda Objective.
– – Centre de santé régional de Musoma.
– – Centre médical Mnazi Mmoja à Zanzibar. Brûleur à déchets qui peut être installé dans un camion et également les plus susceptibles de brûler dans de nombreuses villes les déchets solides communautaires, montre tous les types de déchets, plastiques, organiques.un incinérateur industriel à 1000 livres par heure, pour le substrat naturel avec les déchets ,.
il veut comprendre les avantages de chaque appareil de chauffage.
ainsi que l’utilisation: essence ou diesel, tarifs ainsi que les moyennes séparément ,.
Il désire un four (économiseur) pour l’eau à 60 ° C, et pour comprendre la circulation sanguine de l’eau requise. presure à l’avance 500 mts et dans un navire de 3 kg / cm2 Centre de soins de santé ACL, Abuja (Nigéria)

Brûleur à déchets médicaux capable de se débarrasser de 0,25 mètre cube de déchets pathologiques ou contagieux.

WASTE INCINERATOR

 

–          150 KG/HR

–          Compliant with EU rules, Directive 2000/76/EC

–          Fuel type: Diesel

–          Easy management and maintenance

–          Temperatures:

850 deg C for municipal waste

1000 deg C for medical waste

1100 deg C for dangerous waste containing halogenated organic substances with content of chlorine or its compounds.

distributeur d'incinérateurs hospitaliers

Centre de bien-être CSH, (Calabar, Nigéria)

Brûleur à déchets médicaux qualifié pour se débarrasser d’environ 0,5 mètre cube de déchets pathologiques ou contagieux.

Le brûleur doit avoir une chambre de combustion double et contrôler la quantité de dioxine ainsi que divers autres gaz rejetés sans être endommagés.

Mesures approximatives, aux distributeurs communs, néanmoins portables autant que pratique.
Établi pour se débarrasser des produits jetables qui peuvent être détruits sur place. Ces déchets comprennent en outre des «sacs rouges» pollués et transmissibles. Pansements chirurgicaux, appareils d’évaluation en plastique ainsi que d’autres déchets.
Élimination des déchets rapide, complète et fiable.
Combustion à double chambre, chambres blindées en plus recouvertes de réfractaire à la chaleur. Contrôles de niveau de température électroniques programmables, indicateurs de niveau de température ainsi qu’un enregistreur de charge. La régulation du gaz et de l’air réduit la consommation de gaz.
Installation minimale avec heure de lancement.
Couche d’acier aluminisée revêtue de réfractaire ainsi que de briques réfractaires. Des enregistreurs d’affichage en plus de divers autres périphériques accessoires doivent certainement être fournis.
Le système de facturation:.
– – Porte de coût verticale sur la chambre à clés.
– – Système de paiement du vérin à entraînement pneumatique ou hydraulique.
– – La voiture a fermé la porte après la charge.
– – Température de la chambre primaire et secondaire fournie et également enregistrée (en option).
Coût de facturation:.
– – Environ 100 kg par ressources humaines de déchets ou de sacs rouges classés à 2200 BTU par kg.
Gaz: – Gaz.
Capacité (m3): 1,65 m3 ou peut-être plus.
Capacité Ave: 100 kg par heure.
Capacité de chambre supplémentaire (CubicMtr): 3,88 et bien plus encore.
Taille (mm): 1880 ou mieux.
Taille (mm): 1280 ou bien mieux.
Hauteur incl. Conduit (mm): 7700 ou bien mieux.
Ouverture de la porte des cendres (mm): 475 × 900 ou bien mieux.
Min. Température de fonctionnement: 90 degrés centigrades.
Max, température de fonctionnement: 1350 degrés centigrades.
Temps de résidence dans la deuxième chambre: 2 sec.
Suivi du niveau de température: aussi bien pour les chambres essentielles que pour les chambres supplémentaires.
Système d’emballage Manuel / semi-automatique.
Efficacité des dégâts des déchets:>> 90% en poids.
Filtre: De nombreux autres filtres équivalents ou en céramique afin de réduire l’induction d’impuretés dangereuses dans l’air, de particules, de monoxyde de carbone, de dioxine / furane directement dans l’ambiance.
Système de décendrage: manuel / semi-automatique.
– Fonctions civiles. – Chariots de collecte des déchets

Total / Peinture: -.
Couche de peinture époxy moderne de qualité supérieure, immunisée contre la chaleur, 2 couches.
Puissance de configuration (tension électrique): 440V / 50 Hz.
L’équipement de surveillance des déchets devrait avoir;.
Chariot d’emballage mobile: 06 Non – – Pour le transport des déchets des centres de santé des salles au site / emplacement du chauffe-eau, ouverture par le haut.
Poubelles MOBILE: 06 Non – Fabriqué à partir de plastique, de couleur bleue avec un rabat.
Sacs en plastique: 2000 non chacun en rouge ainsi que de même teinte jaune.
Paires de protection des mains robustes: pour le personnel de traitement des déchets-06 paires.
Paires de chaussures longues: pour la gestion des déchets – – 06 paires.

Centre de santé et de bien-être CSH, (Calabar, Nigéria)

Réchauffeur de déchets médical capable de se débarrasser d’environ 0,5 mètre cube de déchets pathologiques ou transmissibles.

the three incinerators for burning and incineration of drugs and toxic substances

Requirements and specifications for the process of supply, installation, operation and guarantee the three incinerators for burning and incineration of drugs and toxic substances for customs department

Free three years guarantee for incinerators from delivery date. In addition of free spare parts guarantee letter should be valid for 10 years from the end date of guarantee.
Electric unit should be delivered with service manual in English
Electric capacity should be 380-220 v 60 Hz for all equipment
Delivered time as soon as possible
Validity of offer should be not less than 6 months
In case of order, we need two certificates of origin that should be stamped from Saudi embassy in your country
Commercial invoice (certified from Chamber of Commerce)
Two original bills
Send someone to fix and train our staff for 5 people in each location
Send your manuals for installation units
Waiting for your good reply
Please provide details for the following,
1-Technical explanation includes technical specifications, scope of work, the requirements of the operation and maintenance.
2- Technical explanation for technicians training and furnace operators
3- Catalogs of oven with all the required specifications

The offer price must include the following;-
1. Training for technicians and operators for a period not less than two days at each site and give trainees training certificates
Documents must contain all the information such as brochures, technical resources, operating, maintenance manuals, and brochures dealing with the keyboard
2- Letter from the manufacturer to give three years guarantee for incinerators from delivery date. In addition of free spare parts guarantee letter should be valid for 10 years from the end date of guarantee
3- Provide certificate that the incinerators are environmentally friendly and attach proof that environmental protection organizations in the country of Origin and your product should be emissions free due to the sensitivity of its international air ports.
4-copmany must committed delivery, operation, and installation within 60 days from the date of site projects detection
5- Train five people for two days for each device for a period of two days for installation, operation, and safety. Give them certificates
GARANTEE
Provides operating and emergency maintenance also provides free spare parts for three from the starting date of the project. The company must make regular maintenance every 3 months and raise the maintenance report to the management of public concern and Maintenance.
The company must make all the maintenance work as well adjustment of the control and protection devices and filters / filters purify insulation
Specifications of ovens:
•    Installing a readymade concrete base (Precast) with Height 30 cm above the ground and 20 cm below the surface of the earth.
•    The dimensions of the base are increased by (2 meters) from the edge of incinerators
•    The rest of the accessories in all the trends even allows the worker directly feeding and maintenance work, cleaning and move easily taking into account the tendencies of the base toward the door for drainage of water.
•    The floor coating must be high-quality epoxy paint.
•    Install anti-rust and heat Umbrella of brick and steel (pyramid shape) of (5) meters height above the ground which installed with the edge of the concrete base by thick galvanized columns
•    This umbrella Cover the site furnace and allow bringing the chimney
•   The site is surrounded by an iron fence (sheet metal) 3 meters height from the surface of the earth in order to protect the incinerators from dust storms
•    The iron fence must have a 5 meters Width gate
•    Automatic anti-rust and heat electrical circuit must be provided
•    The furnaces are highly efficient, emissions-free, safe, and environmentally friendly and have capacity of not less than 3,000 kg of materials and the rate of burning at least 400 kg / h
•    The method of feeding the furnace through a side slot or from the top and the emission of the smoke is completely prevented.
•    a furnace Must have two rooms, one of them is the  main room of not less than the “5” stoves to the process of burning materials and other secondary room of not less “2” stoves to burn resulting gas from the first process as well as the chimney
•    The main component of the body of the furnace is stainless steel box, the thickness of not less than 7 mm with a layer of zinc phosphate plated with aluminium reflector to heat
•     the thickness of the door of 150 mm and a hardness of not less than 170 kg / m 3 to be burnt, automatic comprehensive remote system.
•    Furnaces must be destructive enough to burn and incinerate the material which mentioned previously
•   furnaces must have certificates are supported global enterprises and government competent for environmental protection In the country of origin or the General Presidency of Meteorology and Environment Protection in Saudi Arabia
•    The oven can work for 24 hours so as to allow for the burning of materials for a period of not less than 12 consecutive hours and the remainder for cooling and provides full fuel tank with a capacity of 1000 L to turn on the oven.
•    Must have an automatic ignition and diesel is used
•    a furnace has the ability to withstand extreme temperatures up to “130o c And also, it guarantees continuous operation of which can be utilized for 24 hours with the ability to remove residues during the work of the oven, Insulating layer of calcium must be present in the rooms with Thickness not less than 50 mm and a wall thickness of 100 mm
•    Isolation of burning room: the space between the walls must be of the “stainless steel”. In addition, burn room must fill with Thermal insulation material.
•    Ensure that the combustion of materials emitted in the secondary room should be at least two seconds period and the room is lined with high-density ceramic fibbers
•    Incinerators must contain a system for processing (purification) gasses before emission of the smoke.
•     Incinerators must have the capacity of self-cooling after the end of the daily operating period.
•    Incinerators must have chimney not less than “4 meters” height from the surface of the oven, also, it must be thermally insulated and non-rust able, and must also be removable, installation and tide default.
•    Electrical capacity required “220/ 380-volt “60 hertz
•    Incinerators must be fitted with a control panel of the electronic keys to monitor all the necessary indicators of activation keys, as well as start-up and switch off so as to be isolated inside a metal box with the presence of the following:
Alarm Sensor in the event of (crashes “burner” or purification device or heat leakage       or internal connections and wiring)
Monitors for the temperature of the rooms
Aerosols Filter indicators/ monitors
Room temperature sensors
Indicators for furnaces and index overload
Timer for Extinguish the oven automatically depending on the time required.
•    All equipment must be highly resistant to external conditions such as high temperature (50oc)
•    All doors must have special lock are not allowed non-persons appointed to work.
•    Providing fire extinguisher for each site with a capacity of 10 kg at least

Технология сжигания отходов

Базовая информация.

Номер модели: производители инсинераторов
Экспортные рынки: глобальный

описание продукта

Ответ по технологиям (FAQ)

В: Какие отходы можно использовать в этом оборудовании?
A: Это оборудование для медицинских отходов, домашних животных, бытовых отходов, живых отходов. Запретить любые взрывчатые и радиационные материалы, жидкие отходы и газовые отходы.

Q: Стандарт дыма из инсинератора
A: Стандарт правительства Китая: № GB18484-2001.

Q: способность лечения
A: Средняя мощность, рассчитанная по медицинским отходам (низшая теплотворная способность (LC P): 3,0TH ккал / кг в час), не означает никаких отходов. Скорость сгорания животных / домашних животных составляет около 2/3 средней мощности.

Время использования инсинератора Clover в сутки до 24 часов. Между каждой загрузкой / сжиганием есть время охлаждения примерно 0,5-1 час и время для загрузки отходов. Фактическое время горения в день составляет около 16 часов. Срок службы инсинератора от 5 до 10 лет в зависимости от использования.

Как правило, мы предлагаем небольшую лабораторию, небольшую клинику с производительностью до 20 кг в час. При использовании инсинератора в больнице, пожалуйста, рассчитайте производительность отходов около 2 кг на человека в день. Если в больнице 200 коек, это означает, что вам нужна одна мусоросжигательная печь мощностью около 400 кг в день, изменение производительности в час составляет около 30-40 кг в час. В зависимости от продолжительности работы в день, отходов, бюджета, развития и т. Д. Вы можете использовать установку для сжигания отходов от 30 до 50 кг в час.
* Как рассчитать уровень сжигания кремации животных: 2/3 медицинских отходов.

Q: Сборка и тестирование
О: Мы поставляем всю документацию и инсинераторы, простые в установке и эксплуатации. Заказчик может отправить людей на наш завод для ознакомления с установкой и работой. Как правило, мы не отправляем инженера на местный объект, если нет запроса. Стоимость отправки оплачивается дополнительно в соответствии с заказом.

Q: Температура сгорания
A: Первая камера сгорания: 800-1000 градусов сантиметра.
Вторая камера сгорания: 1000-1200 градусов санти.

В: Режим управления инсинератором
A: Режим управления по умолчанию – это общий случай управления. Режим ПЛК в зависимости от модели и заказа.

В: Затраты на эксплуатацию и техническое обслуживание
A: Стоимость эксплуатации в зависимости от расхода топлива и мощности / персонала и т. Д.

Ежегодное обслуживание от 500 до 1000 долларов США в год в зависимости от модели и ситуации использования.

Один человек может обслуживать мусоросжигательные заводы 02 блока. Производители больничных инсинераторов, горелки для инсинераторов, сжигание дизельного топлива в инсинераторах, производитель инсинераторов в Китае, производитель медицинских отходов для инсинераторов, поставщики инсинераторов, Персонал должен иметь базовые знания электрика, чтобы управлять / проверять / обслуживать инсинератор / горелку / воздуходувку в соответствии с руководством пользователя по эксплуатации, и знать риски медицинских отходов для защиты самого работника с помощью необходимого элемента защиты.

Q: Время пребывания во вторичной камере сгорания
A: 02 сек.

Предметы / Модель TS10 (ПЛК) TS20 (ПЛК) TS30 (ПЛК) TS50 (ПЛК) TS100 (ПЛК)
Скорость сжигания 10 кг / час 20 кг / час 30 кг / час 50 кг / час 100 кг / час
Емкость подачи 20кг 40кг 60кг 100кг 200 кг
Режим управления ПЛК ПЛК ПЛК ПЛК ПЛК
Камера сгорания 100л 210л 330 л 560 л 1200L
Внутренние размеры 50x50x40 см 65x65x50 см 75x75x60 см 100x80x70 см 120x100x100 см
Вторичная камера 50 л 110л 180л 280L 600 л
Камера дымового фильтра да да да да да
Режим подачи Руководство по эксплуатации Руководство по эксплуатации Руководство по эксплуатации Руководство по эксплуатации Руководство по эксплуатации
Напряжение 220В 220В 220В 220В 220В
Мощность 0,5 кВт 0,5 кВт 0,5 кВт 0,7 кВт 0,7 кВт
Расход масла (кг / час) 5,4–12,6 7,8–16,3 10,2–20 12.1–24 14–28
Расход газа (м3 / час) 6,2–11,4 8–15,7 9,8–20 9,9–26,1 10–32,2
Монитор температуры да да да да да
Температурная защита да да да да да
Масляный бак 100л 100л 100л 100л 200л
Дверца подачи 30×30 см 45×40см 55×50см 70×55см 80×60 см
Камин 3 метра 3 метра 5 метров 5 метров 10 метров
Тип дымохода Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь
Время проживания 2.0 сек. 2.0 сек. 2.0 сек. 2.0 сек. 2.0 сек.
Вес брутто 1500 кг 2200кг 3000кг 4500кг 6000кг
Внешние размеры 140x90x120 см 160x110x130 см 175x120x140 см 230x130x155 см 260x150x180 см

Incinerador de aves de corral modelo

Información básica.

Mercados de exportación: Global

Descripción del producto

Características principales:
* Todos los modelos con doble cámara de combustión.
* Chimenea / chimenea de acero inoxidable, larga vida útil. * según pedido
* Alta temperatura, larga vida útil del incinerador.
* Instalación gratuita o mínima en obra.
* Alta velocidad de combustión, de 10 kg a 500 kg por hora, hasta 6 toneladas por día.
* Plano de control PLC. * según pedido
* Nuevo diseño para el negocio de cremación de animales de compañía.
* Garantía de un año en incinerador y piezas en stock.

Ámbito de aplicación:
1. Hospital y clínica: Residuos Iátricos, Residuos Infecciosos, Vendajes, Biorresiduos, Medicina.
2. Matadero y hospital y granja de mascotas: animal muerto, biorresiduos.
3. Comunidad, puerto y estación marítima: residuos sólidos urbanos, etc.
4. Laboratorios, ubicaciones remotas, operaciones de socorro en casos de desastre, cremación de animales

El incinerador es un equipo de incineración, quema directamente los desechos mediante gas combustible o combustible oi. Como circunscripción diferente, incinerador se puede nombrar muchas palabras como se muestra a continuación:

Capacidad de tratamiento: incinerador de pequeña escala, incinerador de gran escala y pantalón de incineración.

Material de desecho: incinerador de desechos municipales, incinerador de desechos médicos, incinerador de cremación de animales, incineradores humanos

Combustible del incinerador: incinerador de gas, incinerador de petróleo

Conversión de residuos en energía (WTE): incinerador WTE, incinerador sin WTE

Fabricante de incineradores: fabricante de incineradores de China, fabricante de incineradores de Reino Unido, fabricante de incineradores de EE. UU., Fabricante de incineradores de India.

Famosa empresa fabricante de incineradores: Inciner8 (Reino Unido), Clover Incinerator (China), Pennram (EE. UU.), Haat (India)

Velocidad de combustión: 5 kg / hora, 10 kg / hora, 15 kg / hora, 20 kg / hora, 30 kg / hora, 50 kg / hora, 100 kg / hora, 150 kg / hora, 300 kg / hora, 500 kg / hora

Artículos / Modelo YD-200 YD-300 YD-500 YD-600
Tasa de combustión (kg / hora) 200 kgs / Hr. 300 kgs / Hr. 500 kgs / Hr. 600 kgs / Hr.
Capacidad de alimentación (kgs) 400 kilogramos 500 kilogramos 800 kilogramos 1100 kilogramos
Peso del equipo 7600 kilogramos 8300 kilogramos 13000 kilogramos 16500 kilogramos
Cámara primaria (litros) 2000 2400 4000 5500
Cámara secundaria (litros) 500 1200 1500 1500
Dimensiones externas (cm) 270 x 185 x 380 260x220x420 320x220x460 360 x 220 x 475
Dimensiones internas (cm) 180 x 115 x 96 220x110x100 257x147x108 300 x 147 x 125
Tanque de aceite (litros) 300 500 500 500
Apertura de la puerta (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimenea (M) 10 10 14 14
Tipo de chimenea Acero inoxidable Acero inoxidable Acero inoxidable Acero inoxidable
Cámara secundaria SÍ SÍ SÍ SÍ
Cámara de mezcla de combustión SÍ SÍ SÍ SÍ
Cámara de filtro de humo SÍ SÍ SÍ SÍ
Combustible de combustión Gas de petróleo Gas de petróleo Gas de petróleo Gas de petróleo
Tiempo de residencia 2,0 seg. 2,0 seg. 2,0 seg. 2,0 seg.
Monitoreo de temperatura SÍ SÍ SÍ SÍ

À propos de nous

Nanjing Clover Medical Technology Co., Ltd. local dans la ville de Nanjing, en Chine, près du port de Shanghai.

Nous sommes un fabricant d’incinérateurs de déchets en Chine. Nous produisons des incinérateurs de déchets médicaux, des équipements de crémation d’animaux de compagnie et d’autres incinérateurs de déchets solides. Le taux de combustion de 10 kg, 20 kg, 30 kg, 50 kg, 100 kg, 150 kg, 200 kg, 300 kg, 500 kg, 600 kg par heure, la capacité de traitement quotidienne jusqu’à 6 tonnes par jour.

Les incinérateurs Clover fabriquaient tous les brûleurs à double chambre de combustion, les brûleurs à huile ou à gaz d’origine italienne. Nous utilisons une cheminée en acier inoxydable pour notre incinérateur à longue durée de vie. Pour une émission propre, nous fournissons des épurateurs à sec ou par voie humide avec une technologie avantageuse.

Le marché et les clients des incinérateurs sont partout dans le monde et ont un service direct de fournisseur local.

Nanjing Clover Medical Technology Co., Ltd. est l’un des principaux fabricants d’incinérateurs de déchets en Chine. Toutes les séries comprenaient une capacité de combustion de 10 kg par heure, 30 kg par heure, 50 kg par heure, 100 kg par heure, 150 kg par heure, 300 kg par heure, 500 kg par heure. Jusqu’à présent, tous les modèles sont vendus dans le monde entier et ont de bons commentaires du client final. L’incinérateur médical modèle YD a une chambre à combustion multiple et un épurateur à sec basique (chambre de filtre à fumée) avec un budget de projet raisonnable. Pour les émissions plus propres, nous acceptons des épurateurs par voie humide sur mesure pour incinérateur et ce sera également notre prochain travail en se concentrant sur la technique des émissions.

Incinérateur de modèle régulier pour le marché avec un taux de combustion de 10 kg à 500 kg par heure et nous proposons toujours au client de nous envoyer les détails dont il a besoin, comme les déchets, le carburant et l’alimentation électrique du site local, le temps de fonctionnement de l’incinérateur, etc., afin que nous puissions proposer le bon modèle ou personnalisé fabriqué avec une structure ou des dimensions différentes.

L’incinérateur modèle YD-100 est une machine d’incinération de taille moyenne pour de nombreuses utilisations différentes: pour un lit d’hôpital moyen en dessous de 500 unités, pour tous les animaux de compagnie de petite ou grande taille (comme l’Alaskan Malamute Dog), pour l’incinération de déchets solides municipaux, etc. Le volume de la chambre de combustion primaire est de 1200 litres (1,2 m3) et utilise un brûleur au gazole ou au gaz naturel d’origine italienne.

Tous nos incinérateurs utilisent une cheminée en acier inoxydable et non en acier.Tous nos incinérateurs ont au moins deux chambres de combustion, pas une seule chambre. Tous les brûleurs à combustible d’Italie fabriqués avec la célèbre marque, la meilleure qualité.

L’incinérateur à taux de combustion de 300 kg par heure est très apprécié du marché car ce modèle peut être un équipement d’incinération de déchets médicaux pour les grands hôpitaux et également très bon pour d’autres traitements de déchets solides à moindre coût, même si des animaux de grande taille peuvent également être introduits dans la chambre de combustion. Le volume de la chambre de combustion primaire est de 2,4 m3, assez grand pour les animaux de taille commune. Pour le transport maritime, le YD-300 peut être chargé dans un conteneur de 40 pieds de hauteur.

Chambre de combustion de grande taille jusqu’à 4,0 m3 et dimensions internes de 257 x 147 x 108 cm avec ouverture de porte d’alimentation 108 x 128 cm. Ce modèle peut être une petite usine d’incinération de déchets avec peu de fonds budgétaires. Si le client final l’utilise pour la ferme pour brûler des animaux comme la vache, le cheval ou le chameau, contactez-nous maintenant.

Contactez-nous par e-mail ou par téléphone dès maintenant!

E-mail: [email protected]
Téléphone: + 86-25-84610201

a pet incinerator for the cremation of dogs

We have a 70 bed hospital in namibia. however there is a potential of getting customers from other local doctors.
a small incinerators (ex. please see attached) for some empty chemical bags. Can you please provide me with some details information about these type of incinerators (small scale). a pet incinerator for the cremation of dogs and cats. It will be single use of each pet seperately.Initially we are planning to start this Pilot Project with the National Hospital, to convince the Ministry Officials and on its success to take this project to the Teaching Hospitals, District and Base Hospitals in the Country.municipality need 4 crematory machine for cadavers. I need some information about  price ,  kine of energy for activation ,toxic emission,The incinerator we are looking should be with the advantages of Heat recycling system, utilization of hot water, etc. Capacity – 150-200 kgs/hr and with International standards.get more information about the Pet Cremation Equipment, specially for dogs and cats.

Incinerator

Basic Info.

Model NO.:clover medical limited china
Export Markets:Global

Product Description

Items/Model YD-10C YD-20C YD-30C YD-50C
Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr.
Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs
Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs
Picture  
Primary Chamber (Liters) 200 200 250 400
Secondary Chamber (Liters) 140 140 140 140
External Dimensions (cm) 170x140x160 170x140x160 170x140x190 180x160x200
Internal Dimensions (cm) 55x55x65 55x55x65 55x55x85 70x70x85
Oil Tank(Liters) 50 100 100 150
Door Opening (cm) 38 x 48 38 x 48 38 x 48 45×55
Chimney (M) 5 5 5 5
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES

Nanjing Clover Medical Technology Co., Ltd., Neighborhood in Nanjing city, China.

Cas de projet

Iincinerator Map

Analyse du marché international des incinérateurs de déchets

Date. 10 juin 2012

Mot-clé:

petits incinérateurs

incinérateur de déchets médicaux

incinérateur de crémation pour animaux de compagnie

fabricants d’incinérateurs

L’incinérateur est un équipement d’incinération, des déchets d’incendie direct par gaz combustible ou combustible oi. En tant que circonscription différente, incinérateur peut être nommé de nombreux mots comme ci-dessous:

Capacité de traitement: incinérateur à petite échelle, incinérateur à grande échelle et pantalon d’incinération.

Déchets: incinérateur de déchets municipaux, incinérateur de déchets médicaux, incinérateur de crémation animale, crémateurs humains

Combustible d’incinérateur: incinérateur à gaz, incinérateur à pétrole

Déchets en énergie (WTE) : incinérateur WTE, incinérateur sans WTE

Fabricant d’incinérateur : Fabricant d’incinérateur en Chine, fabricant d’incinérateur au Royaume-Uni, fabricant d’incinérateur aux États-Unis, fabricant d’incinérateur en Inde.

Célèbre fabricant d’incinérateurs : Inciner8 (Royaume-Uni), Clover Incinerator (Chine), Pennram (USA), Haat (Inde)

Vitesse de combustion : 5 kg / heure, 10 kg / heure, 15 kg / heure, 20 kg / heure, 30 kg / heure, 50 kg / heure, 100 kg / heure, 150 kg / heure, 300 kg / heure, 500 kg / heure

La technique d’incinération pyrolytique est la méthode traditionnelle de traitement des déchets depuis de nombreuses années. Partout dans le monde, dans de nombreux pays, les gens anti incinérateur parce que l’incinérateur produira une grande dioxine dans la fumée. «Dioxines» fait référence à un groupe de composés chimiques toxiques qui partagent certaines structures chimiques et caractéristiques biologiques. Les dioxines peuvent être rejetées dans l’environnement par les incendies de forêt, le brûlage de déchets dans les jardins, certaines activités industrielles et les résidus de la combustion commerciale passée des déchets. Les dioxines se décomposent très lentement et les rejets antérieurs de dioxines provenant de sources artificielles et naturelles existent toujours dans l’environnement. Quoi qu’il en soit, nous devons rappeler qu’il s’agit d’un pantalon d’incinération à grande échelle, généralement plus de 30 tonnes par jour. Il s’agit d’un problème social, pour analyser et suggérer des moyens sous différents angles du public, du gouvernement, du développement économique, de la protection de l’environnement, du développement technologique, etc.

Alors, pourquoi utilisons-nous encore un incinérateur?

Premièrement, pour les déchets médicaux de l’hôpital, les incinérateurs à pyrolyse constituent le meilleur traitement à ce jour. La technologie pyrolytique peut tuer le virus, le contrôle de la pollution.

Deuxièmement, pour le corps humain, animal de compagnie, dans de nombreux pays et régions, nous souhaitons les incinérer. Il s’agit de la cérémonie dans le processus de développement de la société, et des cérémonies pour commémorer la disparition de la vie.

Comme ci-dessus pour deux raisons mais pas seulement ci-dessus, nous utilisons toujours des incinérateurs.

Comment pouvez-vous trouver un incinérateur raisonnable pour votre site local?

L’incinérateur n’est pas un équipement bon marché, généralement le prix du modèle à petite échelle est d’environ 5 000 USD par unité et le prix du modèle à grande échelle supérieur à 50 000 USD par unité. Donc, avant d’acheter un incinérateur, vous devez préciser les éléments suivants:

A, brûler quoi? L’incinérateur est un équipement d’incinération, la fonction est les déchets d’incendie. Alors, quel type de déchets souhaitez-vous traiter?

B, petit ou grand? Ceci en fonction de la production de déchets chaque jour ou du volume de déchets par heure d’alimentation, comme la taille de l’animal.

C, carburant? L’incinérateur utilise du pétrole ou du gaz, généralement, le gaz est moins cher que le mazout et le nettoyeur de fumée que le modèle à mazout. Mais certains sites locaux n’ont pas de système d’approvisionnement en gaz.

Et d’autres éléments technologiques, comme l’alimentation (220v, 380v), le type de porte d’alimentation des déchets, la structure de l’incinérateur, etc.

Après avoir clarifié ces derniers, vous pouvez aller chercher un fabricant local ou international, demander des prix, des spécifications techniques et finalement acheter les bons produits.

Écrit par Nicky

Liste des clients de l’incinérateur

Asie :

Timor oriental

Papouasie Nouvelle Guinée

Indonésie

Kazakhstan

Viet Nam

Géorgie

Emirats Arabes Unis

Irak

Afrique :

Somalie

Ile Maurice

MarocI

Tanzanie

Rwanda

Zambie

Océanie :

Australie

Europe :

Belgique

Moldavie

Amérique du Nord :

États Unis